STANLEY C1mjkL6TB4L Flip Straw Thermal Tumbler User Manual
- June 13, 2024
- Stanley
Table of Contents
STANLEY C1mjkL6TB4L Flip Straw Thermal Tumbler User Manual
Care & Use
Thank you for purchasing a Stanley® product!
WARNING:
Do not overfill with hot liquids. Do not fill beyond 0.25″ (7mm) below bottom of threads. This may be marked by a fill line. Overfilling can lead to spills and scalding.
When filled with hot liquid, keep out of reach of children. Hot liquids can cause scalding.
To prevent spills, ensure lid is assembled properly and fully tightened before use. Hot liquids can cause scalding.
Please use caution when drinking hot liquid directly from your mug or water bottle. If you have purchased a water bottle, please note that this item was designed for a high flow rate appropriate for drinking cold liquid. Drinking hot liquid too quickly can lead to scalding.
Do not use sealable items with carbonated or fermenting beverages or foods.
Doing so may cause pressure buildup and lead to lid failure and spills, which
can scald, or forceful ejection of lid and contents, which can cause injury
CAUTION:
Do not use in microwave or oven. Doing so will damage the appliance. Do not
use with warm milk products or baby food. This will minimize bacterial growth.
For best results
- Preheat or precool by filling with hot tap water or cold water. Let stand for five minutes with lid off, empty and immediately fill with your favorite hot or cold beverage
Dishwashing instructions
- Dishwasher safe.
- Do not wash in commercial-strength appliances or on high heat settings. This can lead to vacuum failure and reduced thermal performance. \
- Do not use dishwashing detergents that contain high levels of chlorine or bromide. This can lead to vacuum failure and reduced thermal performance.
- Dishwashing may age the appearance of your item faster than hand washing. If preserving the finish of any paint and artwork on your item is important to you, we recommend hand washing.
- To remove stubborn stains soak overnight with a solution of warm water and baking soda. Remove lid during soak to ensure pressure does not build up.
Hand wash instructions
- Use mild detergent and warm water.
- To remove stubborn stains soak overnight with a solution of warm water and baking soda. Remove lid during soak to ensure pressure does not build up.
- Do not use bleach or cleansers containing chlorine to clean.
Guarantee: Stanley® products are warranted to be free from any defect in workmanship or materials. This warranty does not cover component parts or malfunction due to alteration, misuse, or accident
If you have any questions regarding this or any other Stanley® product, please email our customer service department at info@stanley-pmi.com or in North America, call 1-800-251-4535. Please note: do not return product to retailer.
Stanley® is a registered trademark of:
Stanley®, A Brand of PMI
- This proof is for content/design and not for color. Colors displayed on this print are simulated and do not represent true color
-
DATE: 2013-10-04
-
PART NUMBER: 70-00927-061
-
JOB TYPE : Care and Use insert
-
BRAND: Stanley
-
SUB-BRAND: n/a MBU: n/a
-
ARTWORK NAME : Care and Use insert
-
APPLICATION: Care and Use
-
PROMOTION: various
-
PRODUCT: Stanley Dishwasher Safe-
NOT Carbonation Safe – Vacuum Products -
INVISION NAMES: ALOE, PALM, CHIMP
PRINT SPECIFICATIONS
- PRINTING: 1 Color/2 sided COLOR: Black
- COATING/FINISH : Matte Varnish, if needed
- STOCK: 80g uncoated white paper
- SIZE/TRIM : 560 mm x 216.1 mm
- EX-FACTORY: 12.15.2013
- ASSEMBLY FACTORY: HA
NOTES:
- PRINT FILE: 70-00927-061.outlines.al
- REFERENCE FILES: 70-00927-061.composite.jpg, 70-00927-061.separations.pdf
- Design Lead: JP
- Prepress: JP
DO NOT PRINT FROM ANY LAYER OR COLOR LABELED: “FPO – DO NOT PRINT”
PMI 2013 | ALL RIGHTS RESERVED DO NOT DUPLICATE | DO NOT DISTRIBUTE
Restricted Substances:
Toxics in Packaging http://www.toxicsinpackaging.org Intentional
introduction of any amount of lead, mercury, cadmium or hexavalent
chromium in any packaging is prohibited.
Incidental presence of these metals is limited to 100 ppm total concentration of lead, mercury, cadmium or hexavalent chromium in any packaging.
Certificates of Compliance are required from all suppliers of packaging or packaging components and must be produced upon request by an enforcement agency. Suppliers should submit certificates to test labs with their production samples.