SEALEY BG150CX BGST Bench Grinder Floor Stand Instruction Manual

SEALEY BG150CX BGST Bench Grinder Floor Stand

Product Information

• The Sealey Bench Grinder Floor Stand (Model No: BGST) is designed to provide a stable and adjustable base for a variety of bench grinders.
• It is manufactured to high standards to ensure years of trouble-free performance when used correctly and maintained properly.

Contents

Assembly Instructions

1. Before starting assembly, ensure all parts are present and group them by size and style.
2. Finger-tighten nuts and bolts during assembly.
3. Once assembled, use an adjustable wrench to securely fasten all fixings.
4. Ensure the stand is installed on solid, level ground and used with compatible bench grinders.

Environment Protection

Recycle unwanted materials instead of disposing of them as waste. When the product reaches the end of its service life, drain any fluids into approved containers and dispose of the product and fluids according to local regulations for environmental safety.

Registration and Warranty

To register your purchase or make a warranty claim, contact Sealey Group using the provided contact information. The warranty period is 12 months from the purchase date, requiring proof of purchase for any claims.

Contact Information

• Sealey Group, Kempson Way, Suffolk Business Park, Bury St
• Edmunds, Suffolk. IP32 7AR
• Phone: 01284 757500
• Email:sales@sealey.co.uk
• Website: www.sealey.co.uk

FAQ

Q: Can this stand to be used with bench grinders from other brands?

A: Yes, the Sealey Bench Grinder Floor Stand (BGST) is suitable for use with other leading brands of bench grinders in addition to specific Sealey models listed in the manual.

• Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.
• IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
• USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
• FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

INTRODUCTION

• Bench grinder stands with adjustable feet. Suits a wide variety of bench grinders with central mounting holes.
• Suitable for the following Sealey machines: Model No’s BG150CX, BG150XD/99, BG150XL/96, BG150XLW/98, BG150XW/99, BG150XWL, BG150WL, BG200WL, BG200XL, BG200/99. Also suitable for other leading brands of bench grinders*.

SPECIFICATION

• Model No: . …………………………………………………… BGST
• Bench Grinder Base (W x D): … ……………..270 x 220mm
• Overall Size (W x D x H): . …………….465 x 465 x 900mm

CONTENTS

ASSEMBLY

• Before you begin, separate all parts and group by size and style. If any parts are missing, contact your Sealey stockist immediately.
• NOTE: finger tightens nuts and bolts when assembling. Once assembled, use an adjustable wrench to ensure all fixings are secure.
• WARNING! This stand must be installed on solid level ground and in combination with compatible bench grinders.

ASSEMBLING THE STAND (FIG.1)

• Use bolts (6) and nuts (7) to assemble the leg set parts.
• Attach a leg (4) to the slotted short top bracket (3). Attach the next leg to the opposite end of the top bracket. Finger tighten.
• Repeat this assembly for the opposite side of the leg set.
• Attach the completed leg assemblies to the narrow top brackets (2). Finger tighten. Repeat on the opposite side.
• Insert the bolt of the foot pad (5) into the leg flange hole at the bottom of the leg, and tighten.
• Attach bottom leg braces (1) between each leg. Finger tighten.
• Place the leg set on a level surface, and adjust and tighten all nuts and bolts.

SECURING A GRINDER (FIG.2)

• WARNING! To avoid injury, turn the grinder switch OFF and unplug it from the power source before mounting it onto the stand.
• Position the grinder on the stand.
• Match the slots of the leg set-top to the holes on the bottom flange of the grinder base.
• Secure the leg set to the grinder base using bolts (9), washers (10,11,12), and nuts (8).
• When all bolts and nuts are tightened, carefully set the grinder on a clean level surface.

ENVIRONMENT PROTECTION

• Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner that is compatible with the environment.
• When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
• Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and parts without prior notice.
• Important: No Liability is accepted for incorrect use of this product.
• Warranty: The guarantee is 12 months from the purchase date, proof of which is required for any claim.
• Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
• IP32 7AR 01284 757500
• sales@sealey.co.uk
• www.sealey.co.uk

Documents / Resources

| SEALEY BG150CX BGST Bench Grinder Floor Stand [pdf] Instruction Manual
BG150CX BGST Bench Grinder Floor Stand, BG150CX, BGST Bench Grinder Floor Stand, Bench Grinder Floor Stand, Grinder Floor Stand, Floor Stand, Stand
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>