Oasis Scientific TVS-360-50 Pole Camera User Guide
- October 27, 2023
- Oasis Scientific
Table of Contents
Oasis Scientific TVS-360-50 Pole Camera User Guide
Overview
ATTENTION: For SAFETY reasons and for further operation instruction, it is advised that you watch the video above completely before attempting to use it.
Stretch and Retract Telescopic Pole
- Stretch the cable, anti-clockwise loosen the loose collars one by one to stretch the pole. Then clockwise fasten the loose collars.Retract the pole:
- Anti-clockwise loosen the loose collars one by one , then pull out the cable in end of the pole to retract the pole. Clockwise fasten the loose collars.
Install the 7” DVR
- Aim the nut opening on DVR bottom at the screw on pole, and fasten it. Fix the direction & angle by adjusting Set Nut&Bolt 1 &2.
- Insert/pull out data line: Just catch the back-end of LEMO jacket and plug it into DVR female slot. When pull out, just catch the movable sleeve and pull it out
Power On/Off & Charge
- Connect data cable first then, press“ ”to turn on the DVR. press “ ” 3 seconds to power it off.
- When low battery indicator appears, please use the DC12V AC adapter or USB 5V to charge it. Note: (If system halted, please reset it)
Record & Photo
- Under“ ”mode，press , DVR starts to record, and screen shows ,press again to end record.
- Under mode, press once, screen flashes once, and get one picture.
ATTENTION: Do remember to insert the TF card.
Playback Video/Photo
- Under mode，Press to select the video files or photos, press to playback video or photos.
- Press to exit.
Turn On/Off LED lights
- Press to turn on LED lights, screen icon on.
- Press again to turn off the LED lights, screen icon off.
Fuction Settings
- Under mode “ to enter into function ,press , setting . Press to select “function” press to confirm and exit.
More informattion from www.vividia-tech.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>