SEALEY TSP125L-6 Flexi Grip Nitrile Palm Gloves Instruction Manual
- June 11, 2024
- SEALEY
Table of Contents
SEALEY TSP125L-6 Flexi Grip Nitrile Palm Gloves
Specifications
- Model: TSP125L & TSP125XL/6
- Size Options: Large (TSP125L/6), Extra-Large (TSP125XL/6)
- Coating: Nitrile
- Quantity: Pack of 6 pairs
- CE Marked and conforms to BS EN 388: 2016 4-1-2-2-X
Product Usage Instructions
Introduction
The Flexi Grip Nitrile Palm Gloves provide superior grip, dexterity, and abrasion resistance. The breathable open-back design ensures comfort during extended use. They are CE Marked and meet the standards of BS EN 388:2016.
Safety
- Do not wear gloves where there is a risk of entanglement by moving machine parts.
- Gloves do not contain substances harmful to user hygiene or health.
- Levels of performance mentioned are valid only for the palm ofthe glove.
- Avoid contact with fire.
- Inspect gloves before each use and discard if damaged.
Applicable Standards
The gloves meet the following mechanical hazard standards:
- Abrasion Resistance: 4
- Blade Cut Resistance: 1
- Tear Resistance: 2
- Puncture Resistance: 2
- Cut Resistance Method (EN ISO 13997): X
Maintenance
Storage
- Store gloves in their original packaging.
- Maintain gloves in normal temperature and humidity conditions.
- Keep gloves in clean, covered, and ventilated premises.
Maintenance
Inspect gloves before each use and replace if damaged. Follow the care
instructions provided to ensure longevity and performance.
This document complies with Regulation (EU) 2016/425 for Personal Protective
Equipment. For more information, visit
www.sealey.co.uk.
ENVIRONMENT PROTECTION: Recycle unwanted materials instead of disposing of them as waste. Dispose of the product and fluids according to local regulations when they become unserviceable.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.
REFER TO INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND
WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE
INSTRUCTIONS SAFE FOR FUTURE USE.
INTRODUCTION
- Nitrile-coated palm gives superior grip and dexterity. Good abrasion resistance. Breathable open back. CE Marked and conforms to BS EN 388:2016 4-1-2-2-X.
- Sizes: TSP125L/6 (Large), TSP125XL/6 (Extra-Large)
- Notified Body: 0075
- Type Examination Certificate Number: 0075/1022/162/11/18/2709
- Carried Out By CTC
SAFETY
- Users should be warned that gloves should not be worn when there is a risk of entanglement by moving parts of machines.
- This model does not contain any substances at levels that are known to, or suspected to, adversely affect user hygiene or health.
- The protection against risks or hazards which are not mentioned in this document is not warranted.
- The levels of performance mentioned are only valid for the palm of the glove.
- These levels of performance are obtained from the tests done according to the conditions defined by the applicable standards.
- This glove shall not be in contact with fire.
- Before use, the glove shall be visually controlled. In case of deterioration, the gloves must be scrapped (abrasion, cut, tear, …).
- For gloves with two or more layers of material, the performance levels are warranted only for the whole glove.
- For gloves with two or more layers, the overall classification does not necessarily reflect the performance of the outermost layer.
APPLICABLE STANDARDS
MAINTENANCE
STORAGE
- Store the gloves in their original packaging.
- Store the gloves in normal temperature and humidity conditions.
- Store the gloves in clean, covered and ventilated premises.
MAINTENANCE
The gloves should be inspected before each use, and replaced if damaged.
This document has been drawn up according to Regulation (EU) 2016/425 as
amended to apply to GB for Personal Protective
Equipment. The declaration of conformity can be accessed at
www.sealey.co.uk.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner that is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
REGISTER YOUR
PURCHASE HERE
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner that is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
- Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
- Important: No Liability is accepted for incorrect use of this product.
- Warranty: The guarantee is 12 months from the purchase date, proof of which is required for any claim.
EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68
Ireland UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St
Edmunds, Suffolk. IP32 7AR 01284 757500
sales@sealey.co.uk
www.sealey.co.uk
© Jack Sealey Limited
Frequently Asked Questions
- Q: Can these gloves be used for handling chemicals?
- A: These gloves are primarily designed for mechanical protection and grip. It is recommended to check compatibility with specific chemicals before use.
- Q: Are these gloves suitable for use in extreme temperatures?
- A: While the gloves provide good abrasion resistance, they are not designed for extreme temperature conditions. Avoid exposing them to extreme heat or cold.