GSD WXT2PM2003 WIFI+BT Module User Guide
- June 11, 2024
- GSD
Table of Contents
Hui Zhou Gaoshengda
Technology Co., LTD
WXT2PM2003
WXT2PM2003 WIFI+BT Module
WIFI+BT Module
IEEE 802.11 a/b/g/n/ac/ax 2T/2R
Model Number: WXT2PM2003
Product Description
The WXT2PM2003 is a complete 2.4GHz/5GHz WIFI 2×2 MIMO module. This module
provides a high level of integration with a dual-stream IEEE 802.11ax MAC/
base band /radio and Bluetooth 5.4.The WLAN operation supports 20MHz,40MHz and
80MHz
channels for data rates up to 1201Mbps. It fully complies with IEEE 802.11
a/b/g/n/ac/ax feature rich wireless connectivity at high standards, delivers
reliable, cost-effective, throughput from an extended distance.
Product Features
◆ Complies with IEEE 802.11b/g/n/ax for 2.4GHz，IEEE 802.11a/n/ac/ax for 5GHz
◆ Bluetooth v5.4
◆ Two transmit and Two receive path(2T2R)
◆ Works with all existing network infrastructure
◆ Capable of up to 128-Bit WEP Encryption
◆ Freedom to roam while staying connected
◆ UP to 1201 Mbps High-Speed Transfer Rate in 802.11ax mode of operation
◆ Operating Systems: Linux, Windows
◆ Low power consumption
◆ Easy to install and configure
◆ ROHS compliant
Product Specification
| Model No. | WXT2PM2003 |
|---|---|
| Product Name | WIF+BT Module |
| Standard | 802.11 a/b/g/n/ac/ax |
| Interface | PCIE for WIFI，USB for BT |
| Data Transfer Rate | MAX of 1201Mbps |
| Modulation Method | GFSK,π/4-DQPSK,8DPSK(bluetooth) DQPSK,DBPSK,CCK(802.11b) |
QPSK,BPSK,16QAM,64QAM with OFDM (802.11g)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11n) QPSK,BPSK,16QAM,64QAM with OFDM
(802.11a)
QPSK,BPSK,16QAM,64QAM,256QAM with OFDM (802.11ac)
QPSK,BPSK,16QAM,64QAM,256QAM,1024QAM with OFDMA
Frequency Band| BLUETOOTH: 2402~2480 MHz WIFI
2.4G: 2412-2472MHz (CE, MIC); 2412-2462MHz (FCC)
5G: 5180-5240MHz, 5260-5320MHz, 5500-5700MHz, 5745-5825MHz (CE, FCC)
5180-5240MHz, 5260-5320MHz, 5500-5720MHz (MIC)
Security| WEP, TKIP, AES, WPA, WPA2
Operating Voltage| 3.3V±10%
Current Consumption| ＜1000mA
Antenna Type| FPC Antenna
Operating Temperature| -40 ~ 85°C ambient temperature
Storage Temperature| -55 ~ 125°C ambient temperature
Humidity| 5 to 95 % maximum (non-condensing)
NOTICE:
◆Please keep this product and accessories attached to the places which
children can’t touch;
◆Do not splash water or other liquid onto this product, otherwise it may cause
damage;
◆Do not put this product near the heat source or direct sunlight, otherwise it
may cause deformation or malfunction;
◆Please keep this product away from flammable or naked flame;
◆Please do not repair this product by yourself. Only qualified personnel can
be repaired.
Frequency Band(s)
This module operates with the following frequency bands and maximum frequency
power.
NOTE:
The product is compliant with these power limits required by the European
Union. Frequency bands supported by the product vary by model.
2.4G&5G WIFI: <20dBm
BLE: <13dBm
The device is restricted to indoor use only when operating in the 5150 to 5350
MHz frequency range.
| AT| BE| BG| HR| CY| CZ| DK
---|---|---|---|---|---|---|---
EE| FI| FR| DE| EL| HU| IE
IT| LV| LT| LU| MT| NL| PL
PT| RO| SK| SI| ES| SE| UK(NI)
EU DECLARATION OF CONFORMITY
Hereby, Hui Zhou Gaoshengda Technology Co.,LTD declare that WIFI+BT Module
with model WXT2PM2003 is in compliance with Directive 2014/53/EU.
Note: This module applies for client without radar detection.
FCC Statement
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in mobile exposure condition without 20cm distance.
The module is limited to OEM installation ONLY.
The OEM integrator is responsible for ensuring that the end-user has no manual
instruction to remove or install module.
The module is limited to installation in mobile application.
A separate approval is required for all other operating configurations,
including portable configurations with respect to Part 2.1093 and difference
antenna configurations.
There is requirement that the grantee provide guidance to the host
manufacturer for compliance with Part 15B requirements.
The module complies with FCC Part 15.247 / Part 15.407 and applies for Single
module approval.
Trace antenna designs: Not applicable.
Antennas:
| 2.4G | 5G | BT |
|---|---|---|
| FPC antenna0 & 0.52dBi | FPC antenna & 2.72dBi | FPC antenna & 1.19dBi |
| FPC antenna1 & 0.48dBi | FPC antenna & 2.73dBi |
2.2 List of applicable FCC rules
The device compliance with FCC Part 15.247 and FCC Part 15.407.
2.3 Summarize the specific operational use conditions
The OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required for the installed module.
2.4 Limited module procedures
Device is single module approval.
2.5 Trace antenna designs
FPC antenna. Shown as below: 2.4G WIFI (2400-2500MHz) antenna gain is 0.52dBi
and 0.48dBi.
5G WIFI (5000-6000MHz) antenna gain is 2.72dBi and 2.73dBi.
BT (2400-2500MHz) antenna gain is 1.19dBi.
2.6 RF exposure considerations
Compliance with FCC Part 2.1091
This device is intended only for OEM integrators under the following
conditions:
- The antenna must be installed such that 20 cm is maintained between the antenna and users.
- The transmitter module may not be co-located with any other transmitter or antenna. As long as the two conditions above are met, additional transmitter testing will not be required.
2.7 Antennas
FPC antenna. WIFI Antenna is dual antenna.
2.4G WIFI (2400-2500MHz) antenna gain is 0.52dBi and 0.48dBi.
5G WIFI (5000-6000MHz) antenna gain is 2.72dBi and 2.73dBi.
BT (2400-2500MHz) antenna gain is 1.19dBi.
2.8 Label and compliance information
The label compliance with FCC requirement and the end product must be labeled
in a visible area with the following: ” Contains, FCC ID: 2AC23-WXT2P”
2.9 Information on test modes and additional testing requirements
The module under Continuous transmit ion and lager than 98% duty cycle
2.10 Additional testing, Part 15 Subpart B disclaimer
The test results compliance with FCC Part 15B requirement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>