Shark NV150 Series Navigator Swivel Pro Complete Upright Vacuum User Manual
- June 9, 2024
- Shark
Table of Contents
Shark NV150 Series Navigator Swivel Pro Complete Upright Vacuum User
Manual
QUICK START GUIDE
[ This article contains the Quick Start Guide for the NV150 Series Shark Navigator® Swivel Pro Complete Upright Vacuum. This supports the following product SKUs NV150, NV151, NV150C, and CU50WM. ]
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
WHAT’S INSIDE
| A. Vacuum Pod | E. 5.5″ Crevice Tool |
|---|---|
| B. Handle & Hose | F. Dusting Brush |
| C. Wand | G. Upholstery Tool |
| D. Hose Holder |
ASSEMBLY
NOTE : For proper operation, ensure all parts are firmly CLICKED into place.
EMPTYING THE DUST CUP
Empty the dust cup after each use.
MAINTENANCE
Remove dust cup to access foam and felt filters. To remove HEPA filter, press
down on top of filter door, then tilt and lift out door. Press tab at top of
HEPA filter and pull out filter.
To reinstall, insert HEPA filter into unit and replace the filter door.
Rinse foam and felt filters every month to keep the suction strong. Rinse HEPA
filter every year.
Rinse filters with water only and allow them to air-dry completely before reinstalling. Between washes, tap loose dirt from filters as needed.
Use a coin to turn the locks counterclockwise until they click open, then lift the cover to access the brushroll. Clear the debris intake.
2 WAYS TO CLEAN
FLOOR CLEANING
To engage brushroll, step on floor nozzle and tilt handle back.
ABOVE-FLOOR CLEANING
1. To clean above-floor areas, remove the handle from the wand. Or for more reach, remove the wand from the pod.
2. Attach a cleaning accessory to handle or wand.
For additional parts and accessories, visit sharkaccessories.com
For additional information or to register your product, visit us online at sharkclean.com
© 2019 SharkNinja Operating LLC
NV150_QSG_MP_Mv1