Shark NV251 Rotator Pet Plus Upright Vacuums User Manual
- June 9, 2024
- Shark
Table of Contents
Shark NV251 Rotator Pet Plus Upright Vacuums User Manual
QUICK START GUIDE
[ Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.]
This article contains the Quick Start Guide for the NV251 Shark Rotator® Pet Plus.
WHAT’S INSIDE
A. Vacuum Pod
B. Handle & Hose
C. Wand
D. Hose Clip
E. 5.5” Crevice Tool
F. Pet Multi-Tool
ASSEMBLY
NOTE : For proper operation, ensure all parts are firmly CLICKED into place.
EMPTYING THE DUST CUP
Empty the dust cup after each use.
MAINTENANCE
Remove dust cup to access foam and felt filters. Next, press down top of
filter door. Tilt filter door and lift out. Press tab at top of HEPA filter
and pull away from the base of the vacuum.
To reinstall, insert HEPA filter into unit and replace the filter door.
Wash filters every 3 months to keep the suction strong.
Rinse filters with water only and allow to air-dry completely. Tap loose dirt
from foam filters as needed between washes.
Brushroll access
Use a coin to turn locks, then lift cover open. Clear the debris intake.
2 WAYS TO CLEAN
FLOOR CLEANING
1. HARD FLOOR
Press switch to I for hard floor surfaces.
2. CARPET
Press switch to II for low and high pile carpet cleaning.
SUCTION CONTROL
Adjust your suction depending on your floor type.
MIN : to reduce suction and increase maneuverability on carpets.
MAX : to increase suction on bare floors.
3. To engage brushroll, step on floor nozzle and tilt handle back.
ABOVE-FLOOR CLEANING
1. To clean above-floor areas, remove the handle from the wand. Or for the more reach, remove the wand from the pod.
2. Attach desired cleaning accessory to handle or wand.
For additional parts and accessories, visit, sharkaccessories.com
For questions or to register your product, visit us online at sharkclean.com
© 2018 SharkNinja Operating LLC