Shark NV60 Navigator Swivel Pro User Manual
- June 9, 2024
- Shark
Table of Contents
Shark NV60 Navigator Swivel Pro User Manual
Model: NV60
QUICK START GUIDE
[ Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit. ]
WHAT’S INSIDE
A. Vacuum Pod
B. Motorized Floor Nozzle
C. Handle Assembly
D. Flexible Hose
E. Extension Wand
F. Dusting Brush
G. 5.5” Crevice Tool
ASSEMBLY
MAINTENANCE
Wash foam and felt filters every 3 months and the post-motor filter once a
year to keep the suction strong.
Rinse filters with water only and allow them to air-dry completely before
reinstalling. Tap loose dirt from filters as needed between washes.
Cleaning the Brushroll
1. Detach the pod from the floor nozzle.
2. Remove any blockages or buildup from the airways in the nozzle.
3. With scissors, carefully cut away any fibers, hair, or string wrapped
around the brushroll.
Avoid damaging or cutting the bristles on the brushroll.
2 WAYS TO CLEAN
FLOOR CLEANING
Press the Power/Surface switch at the top of the vacuum body to select the appropriate surface setting.
Step on floor nozzle and tilt handle back.
ABOVE-FLOOR CLEANING
1. To clean above-floor areas, detach the flexible hose from the top of the extension wand. Or for more reach, detach the extension wand from the floor nozzle hose.
2. Attach desired cleaning accessories to hose or wand.
For additional parts and accessories, visit sharkaccessories.com
For questions or to register your product, visit us online at sharkclean.com
©2019 SharkNinja Operating LLC.
NV60_QSG_MP_REV_Mv7
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>