Shark NV41 Navigator Deluxe Upright Vacuums User Manual
- June 9, 2024
- Shark
Table of Contents
Shark NV41 Navigator Deluxe Upright Vacuums User Manual
QUICK START GUIDE
Use this Quick Start Guide to learn about your new vacuum’s great features.
[ Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit. ]
Join The Clean Evolution.™
When it comes to cleaning, we’re not afraid to get our hands dirty.
At Shark®, we’re constantly working to evolve and innovate products to meet
the needs of people like you. Because our job is to make 5-star-worthy
products that make your life a whole lot easier.
WHAT’S INSIDE
A. Handle Assembly
B. Vacuum Body
C. Motorized Floor Nozzle
D. Super Stretch Hose
E. Cleaning Wand
F. Pet Power Brush
G. Dusting Brush
H. 5″ Compact Crevice Tool
For additional parts and accessories, visit sharkaccessories.com
ASSEMBLY
Attach handle assembly to vacuum body with screw, then connect body to motorized floor nozzle.
Store accessories on the posts on the vacuum body.
Connect hose to back of vacuum body, pressing until it clicks into place. To use an accessory, connect it to other end of hose.
BARE FLOOR AND CARPET CLEANING
Choose Floor Setting.
Pull handle toward you to release the motorized floor nozzle and engage the brushroll.
Adjust suction as needed by turning the controller on the handle.
MAINTENANCE
Empty dust cup after each use:
TIP:
- Wash filters every 3 months to keep the suction strong.
- Rinse filters and allow them to air-dry completely. Tap loose dirt from foam filters as needed between washes.
Note : The foam filters may discolor over time. This is normal
HAVING TROUBLE?
ISSUE : Vacuum is not picking up debris. No suction or light suction.
Solution: Empty dust cup, clean filters, check all openings for blockages.
ISSUE: Vacuum lifts area rugs.
Solution: Turn off the unit to disengage the brushroll and restart with the Power slider switch.
ISSUE: Brushroll and/or Soft Roller does not spin. The Brushroll Indicator Light on the floor nozzle turns red.
Solution: Turn off and unplug the vacuum immediately. Remove any blockages, then reconnect and turn vacuum back on. If Brushroll Indicator Light on the floor nozzle is green, the blockage has been successfully cleared.
If the light is still red, please contact customer service at 1-800-798-7398.
For questions or to register your product, contact us at 1-800-798-7398 or visit us online at sharkclean.com