Shark ST220 Series PRO Spray Mop User Manual
- June 9, 2024
- Shark
Table of Contents
Shark ST220 Series PRO Spray Mop User Manual
Quick Start Guide
Parts
1. Ergonomic Handle
• Rubber Grip
• One touch Spray
2. Shark Gentle Cleanser
• Safe for kids and pets
• No stick residue & great fresh scent
3. Illuminated Spray
• LED light shows solution
• Brightens hard to see areas
4. Extra Long Scrubbing Surface
• Multi-purpose cleaning
• Eliminate tough messes
5. Ultra Maneuverable Head
• 180° spray
• Gets in hard to reach areas
Getting Started:
READY
1) Assemble Unit
a. Line up the 2 sections of the pole and snap permanently into place.
2) Add Batteries
a. Open battery door and carefully insert 4 non-rechargeable AA batteries.
b. Close the battery door securely until you here a “click”.
SET
3) Attach Pad
a. Attached your Shark Washable Microfiber Cleaning pad to the bottom of the
mop head.
b. If you are using a Shark 1 time use pad, make sure you attach the pad with the printing side facing the bottom of the mop head.
4) Add Cleaning Solution
a. Remove your refillable bottle.
b. Add water to the line where it indicates “Water” on your refillable bottle.
c. Add the Shark Gentle Cleanser Concentrate the remaining of the way and fill
to where it indicates “Cleanser”.
d. If using Shark Professional Hardwood Cleanser, there is no need to add any
water – this cleaning solution comes ready to use.
GO
5) Being Cleaning
a. Use your Shark Pro Spray mop throughout your house and on all floor types.
b. For tough spots – simply flip the mop head and use
6) Discard Pad
a. Simply toss your reusable pad in the wash or throw your 1 time use pad in
the trash.
ST220W: FAQ
CAN I USE THE CLEANSER WITH MY CHILDREN AND PETS AROUND?
Shark Gentle Cleanser -Safe for kids and pets -No stick residue & great fresh scent
WHAT DOES EXTRA LONG SCRUBBING SURFACE MEAN?
Extra Long Scrubbing Surface -Multi-purpose cleaning -Eliminate tough messes
GETTING STARTED WITH YOUR SHARK PRO SPRAY MOP
1. Line up the 2 sections of the pole and snap permanently into place.
2. Add batteries: – open battery door and carefully insert 4 non-rechargeable AA batteries. – close th battery door securely until you hear a “click”.
3. Attach Shark’s Washable Microfiber Cleaning pad to the bottom of the mop head. If you are using a Shark 1 time use pad, make sure you attach the pad with the printing side facing the bottom of the mop head.
4. Add cleaning solution: – remove your refillable bottle. – add water to the line where it indicates “water” on your refillable bottle. – add the Shark Gentle Cleaser Concentrate the remaining of the way and fill to where it indicates “Cleanser”. – if using Shark Pro Hardwood Cleanser, there is no need to add any water because the solution comes ready to use.
5. Begin cleaning * For tough spots – simply flip the mop head and use.
6. Discard pad ** Simply toss your reusable pad in the wash or throw your 1 time use pad in the trash.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>