JBL T230NC BLUETOOTH HEADSET User Guide
- June 5, 2024
- JBL
Table of Contents
QUICK START GUIDE
TUNE230NC TWS
WHAT’S IN THE BOX
APP
HOW TO WEAR
- Try different sizes for a perfect fit and audio performance.
FIRST TIME USE
POWER ON & CONNECT
DUAL CONNECT + SYNC
CONTROLS
- Enable advance controls by connecting your JBL TUNE230NC TWS to JBL Headphones App .
** ENABLE YOUR VOICE ASSISTANT THROUGH JBL HEADPHONES APP AND ASSIGN IT TO YOUR PREFERRED
POWER OFF
MANUAL SETUP
DO MORE WITH THE APP
CHARGING
LED BEHAVIOURS
TECH SPEC
| Model: | TUNE230NCTWS |
|---|---|
| Driver Size: | 6 mm/ 0.24’’ Dynamic Driver |
| Power supply: | 5V ****1A |
| Earbud: | 5.1 g per pc (10.2 g combined)/ |
0.011 lbs per pc (0.022 lbs combined)
Charging case:| 47.3 g/ 0.104 lbs
Earbud battery type:| Lithium-ion polymer (70 mA/ 3.85 V)
Charging case battery type:| Lithium-ion polymer (750 mA/ 3.7 V)
Charging time:| 2 hrs from empty
Music playtime with BT on and ANC off:| up to 10 hrs
Music playtime with BT on and ANC on:| up to 8 hrs
Frequency response:| 20 Hz – 20 kHz
Impedance:| 16 ohm
Sensitivity:| 105 dB SPL@1 kHz
Maximum SPL:| 93 dB
Microphone sensitivity:| -38 dBV/Pa@1 kHz
Bluetooth version:| 5.2
Bluetooth profile version:| A2DP 1.3 , AVRCP 1.6 HFP 1.7
Bluetooth transmitter frequency range:| 2.4 GHz – 2.4835 GHz
Bluetooth transmitter power:| <10 dBm
Bluetooth transmitter modulation:| GFSK, π/4-DQPSK, 8-DPSK
Maximum operation temperature:| 45°C
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaging over one gram of tissue.
Device types: (IC:6132A-JBLT230NT) has also been tested against this SAR limit
According to this standard, the highest SAR value reported during product
certification for head use is 0.4278 W / kg.
The device was tested for typical bodily operations where the product was kept
0 mm from the head. To maintain compliance with IC RF exposure requirements,
use accessories that maintain a separation distance of 0mm between the user’s
head and the back of the headset. The use of belt clips, holsters, and similar
accessories shall not contain metal parts in its assembly. Use of accessories
that do not
meet these requirements may not comply with IC RF exposure requirements and
should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user’s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
IC:6132A-JBLT230NT
WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT
CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO
THE INSTRUCTIONS
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Google, Android and Google Play are trademarks of Google LLC.
Amazon, Alexa, Amazon Music, and all related logos are trademarks of Amazon, Inc. or its affiliates.
HP_JBL_TUNE230NC TWS_QSG_Global_SOP_V14