ATH-Heinl 30FZ UG Frame Lift High Quality Double Scissor Instructions
- June 13, 2024
- ATH-Heinl
Table of Contents
ATH-Heinl 30FZ UG Frame Lift High-Quality Double Scissor
Product Information
The ATH-Frame Lift 30FZ is a double-scissor lift designed for lifting
vehicles. It has a rated load capacity and a maximum lifting height. The lift
features an ATH-Frame design and is equipped with a motor for lifting and
lowering operations. The total platform length and width provide ample space
for accommodating various vehicle sizes. The lift is partially galvanized and
powder-coated for enhanced durability.
Technical details
- Rated load capacity: [Load Capacity]
- Lifting height max: [Maximum Lifting Height]
- Drive-on-height: [Drive-On Height]
- Total platform length: [Platform Length]
- Total platform width: [Platform Width]
- Motor power: [Motor Power]
- Lifting/Lowering time: [Lifting/Lowering Time]
- Power supply voltage: [Power Supply Voltage]
- Concrete strength: [Concrete Strength]
- Partial galvanizing incl. powder coating
- Item number: HUK2200
Product Usage Instructions
- Ensure that the lift is placed on a stable and level surface.
- Make sure the power supply voltage matches the required voltage for the lift.
- Position the vehicle on the lift’s platform, ensuring it is centered and properly aligned.
- Activate the motor to start lifting the vehicle. Monitor the lifting process carefully.
- Once the desired lifting height is reached, engage the locking mechanism to secure the lift in place.
- Perform the necessary maintenance or repairs on the vehicle while it is lifted.
- When finished, release the locking mechanism and activate the motor to lower the vehicle.
- Ensure the vehicle is safely removed from the lift’s platform before powering off the lift.
- Regularly inspect and maintain the lift according to the guidelines provided in the user manual.
Note: For detailed instructions on assembly, operation, and safety precautions, refer to the user manual provided with the product.
ATH-Frame Lift 30FZ | 30FZ UG
- High-quality and robust double scissor lift with hydraulic drive, almost maintenance-free
- Powerful hydraulic unit with load-dependent lowering valve
- Very low drive-over height of only approx. 105 mm
- Suitable for installation and use on the floor and optional floor-level installation (in-ground kit)
- Synchronization control via double master and slave systems, safety light barriers, and double hydraulic lines
- Full lifting power from the lowest point due to the mechanical swivel system
- Emergency lowering system for lowering in the event of a power failure, CE-Stop, and acoustic lowering signal
- Ideally suited for paint and body shops, repairs, brake and tire services
Technical details
Technical details
Rated load capacity| 3 t
Lifting height max.| 1.900 mm
Drive-on-height| 105 mm
Total platform length| 1.495 – 2.030 mm
Total platform width| 600 mm
Motor power| 2,6 kW
Lifting/Lowering time| approx. 50 s
Power supply voltage| 3x 400V / C16A
Concrete strength
| min. C20/25
2.500 x 2.500 x 180 mm
DIMINSSION
ATH-Heinl GmbH & Co. KG | Gewerbepark 9
D-92278 Illschwang | Germany | www.ath-heinl.com
Status: October 2022. Errors and mistakes excepted. Sale only through ATH
distributors.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>