JOYO JF-14 American Sound Guitar Effect Pedal User Manual
- June 5, 2024
- JOYO
Table of Contents
JF-14 American Sound Guitar Effect Pedal
User Manual
Thank you for purchasing our product, please read these instructions carefully before using them.
Warning
- Do not disassemble or repair this unit by yourself.
- Do not use or store this unit in the following circumstances: high temperature, high humidity, dirty or strong shock places.
- Do not drop off this unit or bump this unit off hard surfaces.
- Do not use cleaning liquid or alcohol to clean this unit in case of damage.
- Remove batteries if not using the unit for a long period of time.
- Please dispose of the used battery properly.
Batter replacement
- Press the front of the battery cover and then slide back to remove the cover. Take out the flat batteries.
- Put the battery into the battery compartment by placing the negative(-) pole of the battery facing inside. Insert the front of the cover and then press down and push to close.
How to use
A. Connect the input jack with the guitar tightly, the effects pedal will
start working then.
B. LOW–Adjust the low frequency.
C. MID–Adjust the middle frequence.
D. HIGH–Adjust the high frequency.
E. VOICE Adjust the Frequency response and the distortion, together with
the adjustment of DRIVE, it can simulate many kinds of Amplifier.
F. DRIVE Gain control.
G. LEVEL-Adjust the output level.
H. LED will be in red light when the effect pedal is in use. If no light
or dim light, please change the new battery.
I. Power adapter–When using the power adapter, the battery supply will be
cut off automatically.
Specifications
Input Impedance: 1 Mo
Output Impedance: 1K.Q
Running Current: 6mA
Power: 6F22 9V Battery/ DC 9V adapter
Dimension: 120(L)X97(W)X55(H) mm
Weight: 390g
JOYO TECHNOLOGY CO., LTD
Address: 2/F, Lushi Industry Building, 28th District, Baoan, Shenzhen, 518133
China.
www.joyoaudio.com Email:
info@joyoaudio.com Tel: 0086-755-29765381