ITSensor KT 50 Portable Temperature Datalogger User Guide
- June 9, 2024
- itsensor
Table of Contents
ITSensor KT 50 Portable Temperature Datalogger
KISTOCK Data logger For HVAC – Temperature, Humidity
Operating temperature, protection of the instruments and information about storage and the battery
- *Operating temperature:** KT 50: from -40 to 70 °C / KH 50: from -20 to 70 °C
- KT 50: IP65 / KH 50: IP20
- Storage temperature: -40 to 85 °C
- Battery power supply: 2 x CR2032 (lithium 3 V)
Display
- C: Temperature in degrees Celsius
- F: Temperature in degrees Fahrenheit
- RH: Relative humidity (KH 50)
- Dataset is finished
- Records the values at the moment when this indicator appears / flashing: the dataset has not yet started
- Slow flashing: dataset is taking between 80 and 90% of storage capacity
- Fast flashing: dataset is taking 90-100% of storage capacity
- Constant: storage capacity filled up
- Displayed values correspond to maximum and minimum values of the channels
- Alarm action type: rising or
- falling action
- Flashing on the screen + flashing of LEDs: means that the battery must be changed.
Dimensions (mm)
Connections
EN12830 Standard
KT 50 models dedicated to food industry, meet with requirements of EN 12830 norm. This certification is required for transportation, storage and distribution of refrigerated, frozen and deep-frozen food, and ice cream Certification is done by an independent laboratory, COFRAC accredited.
- The screen can be hard to read, and its display speed often slows down at temperatures lower than 0 °C. This has no effect on the accuracy of measurements.
Recorder fuction
The KISTOCK allows to record the values measured instantaneously, it records the values according to a predefined interval. On the other hand, it is possible to operate continuously the KISTOCK thanks to a loop recording.
types of dataset start
The measurement dataset can be launched:
- With a delayed start (with predefined date and time)
- With the software
- With OK key
6 types of dataset stop
You can stop your dataset:
- According to a date and time (if it was started the same way)
- According to a recording duration
- According to a predefined number of recording points
- If the storage capacity of the memory is full
- With “Stop” option of the software
- By holding “OK” key during about 5 seconds, if this function has been previously activated by the software.
Mounting
KISTOCK can be mounted in different ways, you can also move it or install it very easily.
- Magnetic mounting (see photo)
- Necklace for anti-theft
- Batteries cover
- Magnetic fixing
- Locking sign of the batteries cover
Replace the batteries
With 500 days* battery life, KISTOCK ensure long-term measurements. To change the batteries:
- Unlock the battery cover with a screwdriver or a coin.
- Put the 2 batteries superimposing them (3 V CR2032 button batteries) with the + pole visible.
- Put back the batteries cover: the sign of the batteries cover must be placed in front of the opened padlock.
- Turn right the batteries cover: the sign on the batteries cover must be placed in front of the closed padlock.
Accessories
Please refer to the data sheet to get more information about available accessories.
- Maintenance: please avoid any aggressive solvent. Please protect the device from any cleaning product containing formalin, that may be used for cleaning rooms or ducts.
- Precautions for use: please always use the device in accordance with its intended use and within parameters described in the technical features in order not to compromise the protection ensured by the device.
For a KT 50 on the basis of 1 measurement each 15 minutes at 25 °C.
QSG – KT 50 – KH 50 – 17/03/2022 – Non-contractual document – We reserve the right to modify the characteristics of our products without prior notice.