Goldair GCPF325 40cm DC Pedestal Fan with WiFi Instruction Manual
- June 3, 2024
- GOLDAIR
Table of Contents
GCPF325 40cm DC Pedestal Fan with WiFi
Instruction Manual Model: GCPF325
General Care and Safety Guide
Thank you for choosing this Goldair product. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference.
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
Children should be supervised to ensure that they do not play with the appliance.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
-
Ensure that the fan is switched off from the supply mains before removing the guard.
-
Use only the voltage specified on the rating plate of the appliance.
-
Keep all objects at least 1 Metre from the front, sides and rear of the appliance
-
This appliance is intended for household use only and not for commercial or industrial use.
-
Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
-
The common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills. -
Always unplug appliance when not in use.
-
When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Goldair Customer Services Team.
-
If your appliance does not work, or is not working properly, contact the place of purchase. Repair work on the appliance by unqualified persons can cause serious risk to the user.
-
Ensure hands are dry before handling the plug or the main unit.
-
Carry out regular checks of the supply cord to ensure no damage is evident.
-
Ensure that the cord is fully extended (not coiled) while in use.
-
Avoid contact with the moving parts. Keep hands, hair, clothing, away from blade of the fan during operation to reduce the risk of injury to person and/or damage to the unit.
-
Switch off and use handles provided when moving.
-
It is recommended that this fan is plugged directly into the wall socket.
-
A correctly specified, undamaged extension cord may be used with this fan provided it is used in a safe manner.
-
Never place appliance close to radiant heat source.
-
Never operate in areas where petrol, paint or other flammable liquids are used or stored.
-
Never use the appliance to dry clothes.
-
Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
-
Never use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) rinsed in hot soapy water only. Always remove plug from the mains
supply before cleaning. -
Never connect the appliance to mains supply until completely assembled and adjusted.
-
Never remove plug from power socket until the appliance has been switched off.
-
Never remove plug from power socket by pulling cord – always grip plug.
-
Never twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
-
Never use this appliance in the immediate surrounds of a bath, a shower, or a swimming pool or other liquids. The appliance must not be immersed in any liquids.
-
Due to the risk of injury, never use this appliance for any purpose other than its intended use. This appliance is intended for use in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses, by clients in hotels, motels, bed and breakfast type environments and other residential type environments
-
Never use this appliance outdoors.
-
Never operate the appliance with a damaged cord or plug, after it malfunctions, or if it has been damaged in any manner. Have the appliance checked and repaired by a qualified electrician if repair is necessary.
-
Never place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
Components
1. Front guard | 9. Control box |
---|---|
2. Retaining nut | 10. Screw |
3. Fan blade | 11. Internal pole |
4. Locking nut | 12. Height adjustment ring |
5. Rear guard | 13. Outer pole |
6. Motor shaft | 14. Base |
7. Motor housing | 15. Screw |
8. Neck | 16. Remote controller |
COLUMN ASSEMBLY INSTRUCTIONS
- Take the base and column parts from the packing box and loosen the plastic nut.
- Fix the column on the base plate using the plastic nut.
- Unscrew the height adjusting knob.
- Move the extension pole to the desired height.
- Then screw the height adjusting knob to tighten the extension pole.
FAN BODY ASSEMBLY INSTRUCTIONS
- Unscrew the spinner clockwise and the nut counter-clockwise to remove both of them.
- Set the rear guard in the proper position with handle up.
- Screw on plastic nut tightly to attach rear guard.
- Discard plastic sleeve on motor shaft.
- Install the blade onto the motor shaft until it reaches the retaining pin.
- Screw retaining nut onto the motor shaft counter clockwise until tight.
- Press the rim of the rear guard onto the front guard until the rear guard is properly fitted.
- Secure both guards firmly by tightening the fan guard then close easy clip.
Operating your Fan
Always choose a safe location for the fan, keeping in mind the safety
precautions outlined.
Ensure all packaging has been removed from the unit before use. This appliance
requires no installation, it should be used solely as a portable appliance.
FAN OPERATING INSTRUCTION
WARNING: Keep all objects at least 1 metre from the front, sides and rear
of the appliance Once the fan has been assembled correctly, connect the mains
plug to the mains socket.
To turn fan on press ‘ON/SPEED’ on the control box or on the remote. When the
fan is on, it will start in low speed and the display shows .
Repeatedly press ’ON/SPEED’ to select the desired fan speed from 1 to 8.
To turn the fan off press ‘OFF’ on the control box or on the remote.
To make the fan oscillate press ‘SWING’. To stop oscillation press ‘SWING’
again.
Tilt adjusting: To adjust the air flow upward or downward, push the guard
lightly to the desired direction.
WIND MODE
Press the ‘MODE’ button on remote to select the desired wind mode.
There are three wind modes: normal, nature and sleep.
When ‘Normal’ wind is selected the indicating light on the control panel will
be on When ‘Natural’ wind is selected the indicating light on the control
panel will be on.
When ‘Sleep’ wind is selected the indicating light on the control panel will
be on.
You cannot change the fan speed in Natural and Sleep modes.
TIMER (Remote Control Only)
You can set the fan to automatically turn itself off within a desired time
period from 0.5 to 7.5 hours. When the fan is on. Press on the remote then
press the ‘+’ or ‘-’ buttons to select the fan to automatically turn itself
off within a desired time period from 0.5 to 7.5 hours.
On the control panel, the corresponding lights will show on the panel.
REMOTE CONTROL
The remote control buttons perform the same functions as those on the control
panel of the unit.
To replace the batteries in the remote control, use a screwdriver to unscrew
and lift the battery cover. Replace all batteries with 2 x AAA type batteries.
Ensure you insert new batteries with the polarities in the correct direction.
Replace the battery cover and tighten the screw.
Remove batteries when unit is not being used for prolonged periods.
Do not dispose of batteries in fire as batteries may leak or explode.
Do not recharge non-rechargeable batteries.
WiFi – Downloading and Setting up APP
This APP is supported only on 2.4GHz Wi-Fi channels. Please ensure your phone
is 2.4GHz capable
Note this device will only work within your home WIFI system.
This does not operate on 3G or 4G internet connections.
You will need a connection to your home Wi-Fi.
Download Goldair mobile APP
- Open the APP Store or Google Play on your mobile phone.
- Open ‘Search’ and enter ‘Goldair’
- Click ‘GET’ and begin to download and install.
Once downloaded to your phone open the APP
- Tap REGISTER near the bottom of the screen.
- Read and agree to the Privacy Policy.
- Add your email address.
- Tap ‘Obtain verification code’
You will then receive an email with a verification code.
- Enter the verification code from your email.
- Create a password.
- Then tap confirm.
If you haven’t received a verification code via email, tap the resend button
and when the verification code is received follow above steps.
Your APP is now registered and ready for pairing to your device.
Pairing APP to Device
Details for pairing this device to the Goldair App can be found at the below
website link.
Either scan the QR code below or enter the website into your browser.
https://goldair.co.nz/goldair-app
https://goldair.co.nz/goldair-app
Cleaning
To avoid risk of electric shock, before cleaning, you MUST ALWAYS switch off
and unplug the fan before cleaning.
Ensure that the fan is switched off from the supply mains before removing the
guard.
Use only a soft, damp cloth to gently wipe the fan and dry well.
To access the fan blade , remove the front guard and securing screw.
Do not immerse the fan in water and never allow water to enter the motor
housing.
Do not use harsh chemicals to clean the fan.
Proof of purchase
To receive warranty retain receipt as proof of purchase. (Refer to back of
booklet).
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@goldair.co.nz
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au
One Year Warranty
Thank you for purchasing this Goldair product. Your product is warranted
against faults and manufacture when used in normal domestic use for a period
of one year. In non-domestic use Goldair limits the voluntary warranty to
three months.
Goldair undertake to repair or replace this product at no charge if found to
be defective due to a manufacturing fault during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident,
incorrect installation, or work carried out by anyone other than a qualified
electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and
remedies available to you under law in relation to the goods or services to
which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are alsoentitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
In New Zealand this warranty is additional to the conditions and guarantees of
the Consumers Guarantee Act (1993).
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@goldair.co.nz
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au
Goldair One Year Warranty (IMPORTANT: Please complete and retain this warranty
card)
Name——————————–
Address——————————–
Place Of Purchase——————————–
Date Of Purchase——————————–
Name Of Product——————————–
Model Number——————————–
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User
Manual may differ slightly from the actual product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>