rizoma PT114 License Plate Holder User Manual

rizoma PT114 License Plate Holder User Manual

Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future.

Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding. Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.

1. Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
2. For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
3. After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike. Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components. Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer. O.E.M.: original equipment manufacturer.

To comply with the TÜV and European Norm in force, the installation of the license plate must be carried out as the enclosed instructions. Consult the website www.rizoma.com, in FOX license plate support section click “DOWNLOAD” to download the PDF document approval ABE.

Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Warning:Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others, also make sure that the temperature of the exhausts and the engine are similar to the ambient temperature.

WARNING: TO CLEAN YOUR LICENSE PLATE DON’T USE DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR LICENSE PLATE, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER

Improper installation could damage the electrical system of the motorcycle and cause a fire, resulting in personal injury or death. Electrical shock hazard. Disconnect the battery before starting to install turn license plate bracket or rear light or the turn signals. The pins must always be isolated and respect the polarity in the connections. The warrantee is not valid for any electric wires cutting or any product modify or tampering.

Installation

Warning cut the support of reflector according to dimensions of lecense plate.

Warnign: cut the support of reflector according to dimensions of lecense plate.

Warning: the pin of positioning must always be inside.

Warning: Insert the pin of positioning the license plate follow the european norm in force.

Warning: In order to avoid damages from the exhaust smokes, are suggest to install the indicators as shown in the image low position.

Warning: the pin of positioning must always be inside.

Warning: Insert the pin of positioning the lecense plate follow the european norm in force.

MONTAGGIO PORTA TARGA INSTALL LICENSE PLATE

INSTALL TURN SIGNALS

INSTALL BRACKETS

DISASSEMBLE ORIGINAL PARTS

ATTENTION: MAKE SURE THAT YOUR MOTORBIKE IS STANDING FORMLY BEFORE YOU START WORK, AS A FALL MAY LEAD TO DAMAGE TO THE MOTORBIKE OR INJURY TO YOU OR OTHERS, REMOVE THE ORGINAL LCIENSE PLATE AND ALL CONNECT COVERS.

TAKE CARE NOT TO PINCH THE WIRINGS

POSITIONING WIRINGS IN THE COVER

ELECTRIC CONNECTIONS

CONNECT THE LECENSE PLATE LIGHT WITH THE WIRING INCLUDED IN THE KIT, FOR THE CONNECTION OF THE RIZOMA INDICATORS BUY THE KIT FOR THE PURCHASE CONSULT THE WEG WWW.RIZOMA.COM OR CONTACT THE AUTHORIZED DEALER.

WARNING: CONTROL THAT IS THE BATTERY DISCONNECT.

WARNING: FOR CORRECT INSTALLATION OF LICENSE OLATE LIGHT FOLLOW THESE STEOS: RESPECT THE POLARITY IN THE CONNECTIONS AND ALWAYS CHECK THAT THE TERMINALS ARE ISOLATED.

POSITIONING WIRINGS

INSTALL ORIGINAL COMPONENTS

ATTENTION: INSTALL THE TAIL, LIGHT THE COVER AND THE FAIRINGS. IT IS ASVISABLE BEFORE TIGHTENING PERMANENTLY THE SCREWA OF TAIL LIGHT TO CHICK THE CORRECT COUPLING OF THE SIDE FIARINGS WITH THE RIZOMA COVER.

TAKE CARE AT THE INSTALLATION OF THE SIDE FAIRINGS, THE REAR PART OF THE SIDE FAIRING HAVE TO BE INSERTED UUNDER THE VOVERS FLAP.

ATTENTION THE WIRINGS NOT MUST BE PINCH AND NOT MUST BE COME OUT FROM THE RIZOMA COVER.

CHECK THE CORRECT ALIGNMENT BETWEEN THE TAIL LIGHT COVER AND THE PLASTIC COVER.

INSTALL LOCK RUBBER

ATTENTION: BEFORE TO INSERT THE ORIGINAL RUBBER, VERIFY THE FUNCTIONING OF THE LICK FOR THE OPEN OF THE SEAT.

ADJUSTABLE REFLECTOR

WARNING: ADJUST THE DISTANCE BETWEEN THE REFLECTOR AND THE REAR WHEEL TO AVOID ANY CONTACT, DURING THE MAXIMUM STROKE OF TREAR SUSPENSION. THE REFLECTOR MUST BE POSITIONED MORE NEAR POSSIBLE AT THE LOWER OF THE LICENSE PLATE.

RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury. The action depicted is performed by professionals under strictly controlled riding conditions. Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy. All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle. Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.

Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products.

References

• Home - Rizoma

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>