Honeywell 924CE Series 924CE55 Micro Switch Instruction Manual

Honeywell 924CE Series 924CE55 Micro Switch Instruction Manual

WARNING

IMPROPER   INSTALLATION

• Consult with local safety agencies and their requirements when designing a machine-control link, interface, and all control elements that affect
• Strictly adhere to all installation

Failure to comply with these instructions could result in death or serious injury.

MOUNT, WIRE AND SEAL SWITCH

1. Refer to Figures 1-4 on Page 3 for proper application of limit switches.
2. Mount switch using two M5 or #10 screws. Torque screws to 5-6 N m (45-53 in lb).
3. Wire standard units according to wiring diagram shown on switch cover nameplate.
4.  Secure cable approximately 6 mm (0.25 in) from the point where the cable exits the switch housing in order to prevent ndue stress to cable sealing.

MICRO SWITCH MINIATURE ENCLOSED LIMIT SWITCH 24CE/924CE SERIES

Designation and Utilization Category| Rated Operational Current Ie (A) at Rated Operational Voltage Ue (V)| VA Rating
---|---|---
 |  | 120 V| 240 V| Make| Break
AC15| B300| 3 A| 1,5 A| 3600| 360
DC13| R300| 0,22 A| 0,1 A| 28| 28
Rated Thermal Current (I th )| 10 A
Rated Impulse Withstand (U imp )| 2500 Vdc
Maximum Fuse Rating| 10 A quick acting
Sealing| IP66/IP67 on 24CE; NEMA 1, 3, 4, 12, 13 on 924CE
Operating Temperature Range| 24 CE: 0 °C to 70 °C [32 °F to 160 °F]; 924CE: 0 °C to 105 °C [32 °F to 221 °F]
Complies with:| •  Low Voltage Directive

•  EN 60947-5-1

MCTF (Mechanical Life): >1,000,000 cycles with single-sided confidence limit of 100 % MCTF (Electrical Life): > 25,000 cycles with single-sided confidence limit of 75 % Highest SIL Capability: SIL3 (HFT:1), IEC 61508-2

Proof Test Interval: 1 Year

(MM)
---|---|---
COURSE VERTICALE (MM)| CORSA VERTICALE (MM)| PERCURSO VERTICAL (MM)
CAT| FP| OP1| OP2| PO1| MOF @ 38,1 mm [1.5 in]
---|---|---|---|---|---
24CE 1-Y| 17,1| 14,9| –| 13,1| 22,5 N [5.06 lb]
924CE 1-Y| 17,1| 14,9| –| 13,1| 22,5 N [5.06 lb]
24CE 1-S| 17,1| 14,9| 12,9| 13,1| 22,5 N [5.06 lb]
924CE 1-S| 17,1| 14,9| 12,9| 13,1| 22,5 N [5.06 lb]
24CE 1-T| 17,1| 12,4| 13,1| 11,5| 22,5 N [5.06 lb]
924CE 1-T| 17,1| 12,4| 13,1| 11,5| 22,5 N [5.06 lb]
24CE 2-Y| 29,9| 27,7| –| 25,9| 22,5 N [5.06 lb]
924CE 2-Y| 29,9| 27,7| –| 25,9| 22,5 N [5.06 lb]
24CE 2-Sw| 29,9| 27,7| 25,7| 25,9| 22,5 N [5.06 lb]
924CE 2-S| 29,9| 27,7| 25,7| 25,9| 22,5 N [5.06 lb]
24CE 2-T| 29,9| 25,2| 25,9| 24,3| 22,5 N [5.06 lb]
924CE 2-T| 29,9| 25,2| 25,9| 24,3| 22,5 N [5.06 lb]
24CE 3-Y| 29,9| 27,7| –| 25,9| 22,5 N [5.06 lb]
924CE 3-Y| 29,9| 27,7| –| 25,9| 22,5 N [5.06 lb]
24CE 3-S| 29,9| 27,7| 25,7| 25,9| 22,5 N [5.06 lb]
924CE 3-S| 29,9| 27,7| 25,7| 25,9| 22,5 N [5.06 lb]
24CE 3-T| 29,9| 25,2| 25,9| 24,3| 22,5 N [5.06 lb]
924CE 3-T| 29,9| 25,2| 25,9| 24,3| 22,5 N [5.06 lb]
24CE 18-Y| 23,9| 21,7| –| 19,9| 22,5 N [5.06 lb]
924CE 18-Y| 23,9| 21,7| –| 19,9| 22,5 N [5.06 lb]
24CE 18-S| 23,9| 21,7| 19,7| 19,9| 22,5 N [5.06 lb]
924CE 18-S| 23,9| 21,7| 19,7| 19,9| 22,5 N [5.06 lb]
24CE 18-T| 23,9| 19,2| 19,9| 18,3| 22,5 N [5.06 lb]
924CE 18-T| 23,9| 19,2| 19,9| 18,3| 22,5 N [5.06 lb]
24CE 28-Y| 43,9| 41,7| –| 39,9| 22,5 N [5.06 lb]
924CE 28-Y| 43,9| 41,7| –| 39,9| 22,5 N [5.06 lb]
24CE 28-S| 43,9| 41,7| 39,7| 39,9| 22,5 N [5.06 lb]
924CE 28-S| 43,9| 41,7| 39,7| 39,9| 22,5 N [5.06 lb]
24CE 28-T| 43,9| 39,2| 39,9| 38,3| 22,5 N [5.06 lb]
924CE 28-T| 43,9| 39,2| 39,9| 38,3| 22,5 N [5.06 lb]
24CE 29-Y| 43,9| 41,7| –| 39,9| 22,5 N [5.06 lb]
924CE 29-Y| 43,9| 41,7| –| 39,9| 22,5 N [5.06 lb]
24CE 29-S| 43,9| 41,7| 39,7| 39,9| 22,5 N [5.06 lb]
924CE 29-S| 43,9| 41,7| 39,7| 39,9| 22,5 N [5.06 lb]
24CE 29-T| 43,9| 39,2| 39,9| 38,3| 22,5 N [5.06 lb]
924CE 29-T| 43,9| 39,2| 39,9| 38,3| 22,5 N [5.06 lb]
24CE 31-Y| 35,7| 33,5| –| 31,7| 25,5 N [5.74 lb]
924CE 31-Y| 35,7| 33,5| –| 31,7| 25,5 N [5.74 lb]
24CE 31-S| 35,7| 33,5| 31,5| 31,7| 25,5 N [5.74 lb]
924CE 31-S| 35,7| 33,5| 31,5| 31,7| 25,5 N [5.74 lb]
24CE 31-T| 35,7| 31,0| 31,7| 30,1| 25,5 N [5.74 lb]
924CE 31-T| 35,7| 31,0| 31,7| 30,1| 25,5 N [5.74 lb]
24CE 55-Y| 35,7| 33,5| –| 31,7| 25,5 N [5.74 lb]
924CE 55-Y| 35,7| 33,5| –| 31,7| 25,5 N [5.74 lb]
24CE 55-S| 35,7| 33,5| 31,5| 31,7| 25,5 N [5.74 lb]
924CE 55-S| 35,7| 33,5| 31,5| 31,7| 25,5 N [5.74 lb]
24CE 55-T| 35,7| 31,0| 31,7| 30,1| 25,5 N [5.74 lb]
924CE 55-T| 35,7| 31,0| 31,7| 30,1| 25,5 N [5.74 lb]
24CE 66-Y| 32,0| 29,8| –| 28| 25,5 N [5.74 lb]
24CE 66-S| 32,0| 29,8| 27,8| 28| 25,5 N [5.74 lb]
24CE 66-T**| 32,0| 27,3| 28,0| 26,4| 25,5 N [5.74 lb]

MICRO SWITCH MINIATURE ENCLOSED LIMIT SWITCH 24CE/924CE SERIES

imensions in mm/inches

WARRANTY/REMEDY

Honeywell warrants goods of its manufacture as being free of defec- tive materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose.
Specifications may change without notice. The information we sup- ply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to deter- mine the suitability of the product in the application.

FOR MORE INFORMATION

Honeywell Safety and Productivity Solutions services its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or the nearest
Authorized Distributor,

Honeywell

Advanced Sensing Technologies 830 East Arapaho Road Richardson, TX 75081 sps.honeywell.com/ast

Read More About This Manual & Download PDF:

References

• Products - Advanced Sensing Technologies | Honeywell

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>