NICAL B0BXSHS63R Electricity Boils Pot Instruction Manual
- June 15, 2024
- NICAL
Table of Contents
NICAL B0BXSHS63R Electricity Boils Pot
Please read the instruction manual carefully before use This product has passed the compulsory 3C certification in China.
Implementation Standard: GB4706.1-2005 GB4706.19-2008
Matters Needing Attention
- Please read the manual carefully before use.
- Before use, check whether the rated voltage marked on the nameplate of the multi-functional electric cooker is consistent with the voltage you use, and use a pin socket with reliable grounding. Do not share a power socket with other power users to ensure personal safety.
- When in use, the multi-functional electric cooker should be placed on a stable platform and out of the reach of children.
- Do not use this product on or near the surfaces of heat-resistant objects such as carpets and plastics. When using this product, the water consumption shall not exceed 80% of the capacity to prevent overflow during the boling process of food and causing electric shock accidents.
- It is forbidden to put the pot body into water for cleaning. Otherwise, electrical components will be damaged and electric leakage accidents will occur. Dry cloth can be used to wipe away the sundries on the surface of the pot body and the inner tank, to keep the surface of the whole pot body clean and improve the service life.
- Please use the product in a dry environment. After use, please store the product in a dry place. Do not store the product in a wet environment, so as not to affect the electrical insulation performance of the product.
- When there is no water in the pot. do not turn on the power for dry burning. Please unplug the plug from the power supply.
- In case of quality problems or faults, do not disassemble the pot by yourself. Please carry out the warranty or repair according to the instructions on the warranty card.
- If the power cord is damaged.lt must be replaced with a special cord or special accessories purchased from the manufacturer or service provider.
Instructions for intelligent reservation panel
- Power on standby: the power on the Nixie tube and the lamp are all displayed, then the Nixie tube displays one, and the lamp is all off, indicating the standby state.
- Function selection: in standby mode (one indicator on the Nixie tube is all off). Press the “function/cancel” key to cycle through the selection of porridge, rice, soup, hot pot, and frying functions. After selection, the corresponding function indicator flashes. At this time, the porridge, rice, and soup functions can be set by pressing the plus or minus key. The hotpot function can adjust the firepower p1-p3 by pressing the plus and minus keys. The frying function can adjust the firepower p1-p3 by pressing the plus and minus keys. When hot pot and frying work, the fire gear is directly displayed, and the corresponding function indicator flashes for about 4 seconds before entering the working state.
- Appointment: when the function (porridge cooking. rice cooking. soup making) is selected and the corresponding time of the function is set by pressing the plus and minus keys, press the “appointment/heat preservation” key to enter the appointment setting. The appointment light flashes. Press the plus and minus keys to set the appointment time. Adding or subtracting 0.5 hours each time. The setting range is 0.5-9.5 hours. Hotpot, frying, and heat preservation functions cannot be set for appointment. The indicator flashes for about 4 seconds to enter the reservation status.
- Porridge cooking: the default time is 1.0 hours. Press plus or minus to adjust the working time. Each time, add or subtract 0.1 hours. The setting range is 0.1-2.0 hours. Heat preservation shall be conducted after work.
- Cooking: the default time is 0.5 hours. Press plus or minus to adjust the working time. Each time, add or subtract 0.1 hours. Setting range: 0.1-0.8 hours. Heat preservation shall be conducted after work.
- Soup making: the default time is LS hours. Press plus or minus to adjust the working time. Add or subtract 0.1 hour each time. The setting range is 0.1-3.0 hours. Heat preservation shall be conducted after work.
- Hotpot: display power P5, press plus or minus to adjust the power. There are five grades p1-p3 in total, the default time is 2.0 hours, and the time cannot be set. Return to standby after work.
- Frying: power P3 is displayed, and the power can be adjusted by pressing plus or minus. There are three grades p1-p3, the default time is 1.0 hours, and the time cannot be set. Return to standby after work.
- Insulation: in standby mode (one indicator on the Nixie tube is all off), press the “reservation/ insulation” key, and the Nixie tube displays BB flashes for about 4 seconds to enter the insulation work. The default time is 8.0 hours. Appointment and set time cannot be set. Return to standby after work.
- Cancel: press the “function, cancel” key during work to cancel work and return to standby
- “Porridge cooking 1.0 hours”{time adjustable 0.1-2.0 hours)
- “Cooking for 0.5 hours”(time adjustable 0.1-0.8 hours)
- “Soup boiling for 1.5 hours”(time adjustable 0.1-3.0 hours)
- Hotpot 2.0 hours(default)
- “Frying for 1.0 hours” (default)
- “Hold for 8.0 hours”(default)
- “Appointment 9.5 hours”(appointment adjustable time 0.5-9.5 hours)
Operating Instructions for Mechanical Switches
- Push the switch to “O”, as shown in Figure: The product is not electrified, the indicator lamp is not lit, and the product is not heated.
- Push the switch to the” position, as shown in Figure 2: The product is electrified, the indicator light is on and heated, and at this time the product is half-power heating.
- Push the switch to “1”, as shown in Figure 3: The product is electrified, the indicator lights on and heated, at this time the product is heated with fu II power.
- The product has a double protection device for temperature control and the housing body, the normal working indicator lamp is always on after electrifying, and when the temperature exceeds the safety temperature upper limit of the product preset, the safety device will automatically cut off the power, the temperature control device will reset automatically when the temperature drops. When the temperature control fails, that is, the product fault, the temperature will rise to the temperature of hot fusing body protection, hot fusing body automatic power protection.
- To ensure safety, be sure to turn the KNOB to “Off” when you stop using the product.
If the water in the pot is boiling. The product will not lose power; when the water in the pot reaches the specified temperature, the product will dryburn to protect itself; therefore, to ensure safety, the product must be supervised during the working process, if you stop using the product, be sure to switch the button to the place shown in figure 1 power cut off.
Cleaning and maintenance
- After each use, please unplug the power plug, let the pot cool naturally to normal temperature, and then clean it with a cleaning cloth or soft cloth. Then dry and place in a safe ventilated place.
- It is strictly prohibited to immerse the pot in water for cleaning to avoid damage to the internal electrical components of the product. The glass cover can be washed in water.
- It is strictly prohibited to use steel wire balls and other hard objects that are easy to damage the non-stick coating to clean the product. If the nonstick coating in the pots scratches accidentally, or the nonstick coating in the pot is naturally worn off after a long time of use, it will not affect the normal use of the product but will increase the difficulty of product cleaning.
- Please use neutral detergent or clean water to clean the tank and lid. Please do not use hard and sharp objects (such as steel balls, blades, etc.)to clean the inner tank. Then wipe it repeatedly with a wet cloth for many times, and place it in a safe and ventilated place after drying.
- This product is sprayed with an anon stick coating inside the pot, and there will be no scale deposition after long-term use, saving the trouble of removing scale.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>