TOYZ Audi Q8 Battery Operated Ride On Car User Manual

Audi Q8 Battery Operated Ride On Car
User Manual

BATTERY OPERATED RIDE-ON CAR
Audi Q8

Audi Q8 Battery Operated Ride On Car

IMPORTANT! Please read these instructions carefully before the first use of the product. This manual should be kept for future use.
Thank you for choosing the Toys by Career Audi Q8 battery operated ride-on car.
You bought a modern, high quality product.
We are sure it will help your child in safe, harmonious growth.
We encourage you to learn about our full offer on our website: www.toyz.pl
Should you have any remarks about this product, feel free to share them with us.
Toys by Career TEAM.

LIST OF PARTS IN THE BOX

WARNING: Before assembling the car, please check if all listed parts are present in the box.

TECHNICAL DATA

ASSEMBLY INSTRUCTIONS

WARNINGS: This product must be assembled by an adult. This product is not suitable for children under 3 years of age. Before the first use, make sure to charge the  batteries fully (about 8-10 hours of charging), otherwise the batteries may become damaged beyond repair. This car must be used under adult supervision at all times. Do not  use the car in the vicinity of stairs/public roads/cars and other dangerous areas. This car may only be used by one child at a time. The maximum weight of the user is 30 kg.  During the usage of the car, the child must sit on the seat at all times. Never allow the child to stand up while the car is moving. While riding the car, never use the front/rear  direction movement lever suddenly. Use it only, when the car is halted. Regularly check all the cable connections. Check whether any parts of the care became damaged. If any  part of the car becomes damaged, stop using the car immediately and contact the distributor. If the car is not being used over a longer period of time, please disconnect all the cables from the batteries. The safe product usage period is 3 years.

REAR WHEEL ASSEMBLY
Turn the vehicle upside down. Remove all parts from the rear axle. Slide the motor onto the rear axle according to the intended side. The motor marked with the letter “R”  should be on the right and the letter “L” on the left side of the vehicle. Connect the engine to the box through the larger opening in the rear of the vehicle. Slide the drive  wheel onto the rear axle and connect to the motor. Place the Ø10 washer on the rear axle. Block the wheel with the nut by tightening it with a key. Fit and put on the hubcaps. Repeat the process for the other side.

FRONT WHEELS ASSEMBLY
Turn the vehicle upside down. Remove all parts from the front axle. Place the Ø10 washer on the front axle. Put the bushing on the rear axle. Put on the wheel and make sure  the sleeve fits snugly with the wheel. Place the Ø10 washer on the front axle. Block the wheel with the nut by tightening it with a key. Fit and put on the hubcaps. Repeat the process for the other side.
Warning! After assembling the wheels, check that there is no gap between the thread and the folded part (see pictures), if the difference is too large, add two or three washers  inside the wheel; after tightening the nut on the outside of the wheel, please twist the wheel with your finger to check if it turns easily, it is very important, if so, it  means that it works well and everything is properly assembled, if the nut presses on the disc and the wheel cannot turn spinning, the engine can be easily damaged!

ASSMEBLY THE STEERING WHEEL

Use a screwdriver to remove the screw on the bottom of the handlebar.
Remove the battery cover.
Put 2 AA batteries according to with polarity.
Place the battery cover on the handlebar and tighten the screw with the screwdriver.
Put the vehicle in its normal position. Remove the M5x40 screw and the Ø5 nut from the handlebar. Place the steering wheel on the steering rod.
Line up the holes on the steering wheel with the holes on the bar.
Lock by screwing the M5x40 and the Ø5 nut through the mapped holes.

MIRRORS INSTALLATION
Place the mirrors in the slots on both sides of the vehicle.

POWER CONNECTION
Connect the plugs from the vehicle with the engine plugs as shown in the picture. Connect the red fuse to the connector on the battery.

MOTOR COVER ASSEMBLY
Install the engine cover and screw them with 4 Ø4×12 screws. Repeat for the second engine.

SEAT ASSEMBLY
Align the tabs on the back of the seat with the holes in the bodywork.
Place the nut under the seat.
Screw the seat on.

CAR FUNCTIONS

1. Power switch.
2. Gas pedal.
3. Changing the direction of travel (forward / backward).
4. Sound signals
5. Changing the driving speed (slow / fast).
6. AUX input

Press the power switch to start the vehicle. The indicator light will come on.
Forward travel is done by setting the forward direction lever and pressing gas pedal. The vehicle has the so-called slow start – it accelerates gradually, so wait a few seconds for it to pick up speed.
To reverse, set the forward / reverse lever to the forward position. The car will stop automatically when you release the accelerator. The drive speed switch has two settings:  slow / fast. Do not allow a child under the age of 5 to use Fast Driving.

REMOTE CONTROL FUNCTIONS

PAIRING THE REMOTE
The vehicle must be turned off.
Use the switch in the car to set the remote control.
The speed indicator lights should blink rapidly
Hold down the pairing button for 5 seconds and then power on the car immediately. The speed indicator light should be solid.
The linking should not be needed the second time you start up.
After the remote control is not used for 60 seconds, it will go into standby mode and the LED will go out.
INSERTING BATTERIES INTO THE RC
To power the RC, two AA 1,5V batteries are needed. Remove the battery lid by unscrewing the screw on top of it. Remove the lid. Insert the batteries as shown on the  diagram inside the battery container. Place the lid back on and lock it by tightening the screw.

BATTERY CHARGING

CONNECTING THE CHARGER

1. Find The charging input socket below the seat;
2. Plug the charger port into the input socket;
3. Plug the charger plug into a wall outlet. The battery will begin charging.

BATTERY CHARGING NOTES

• Before first use of the car, charge the batteries up fully. Always insert the adapter’s tip into the socket in the car first and then put the plug into the socket (the charging  process should be always carried out by an adult, never allow your child to use the AC adapter).
• When the car begins to lose power (moves much slower than usual), charge the batteries before they become completely depleted. Battery charging should last about 10-12 hours. Do not charge the batteries for a period longer than 20 hour.
• It is typical, that the adapter and the batteries become hot during the charging process (max 60°C).
• Never turn the car ON while charging the batteries. The POWER SWITCH must be turned in OFF position when charging.
• Always use the AC adapter included with the car. Never use other batteries than those supplied with the car.
• The batteries need to be charged at least once a month, even when the car is not being used. This is to prevent from fully discharging and potential damaging the batteries.
• Never short-circuit the power layout.
• PREVENT FIRE AND ELECTRIC SHOCK:
• Use the only rechargeable battery and charger supplied with your vehicle. NEVER substitute the battery or the charger with another brand. Using another battery or charger my cause a fire or explosion.
• Do not use the battery or charger for any other product. Overheating, fire or explosion could occur.
• NEVER modify the electric circuit system. Tampering with the electric system may cause a shock, fire or explosion or my permanently damage the system.
• Do not allow direct contact between battery terminals. Fire or explosion can occur.
• Do not allow any type of liquid on the battery or its components.
• Do not open the battery. Battery contains lead acid and other materials that are toxic and corrosive.

DISPOSAL OF BATTERY

• Your sealed lead-acid battery must be recycled or disposed of in an environmentally sound manner.
• Do not dispose of your lead-acid battery in a fire. The battery may explode or leak.
• Do not dispose of a lead-acid battery in your regular, household trash. The incineration, land filling or mixing of sealed lead-acid batteries with household trash is prohibited by law.
• Return an exhausted battery to your local approved lead-acid battery recycle, such as a local seller of automotive batteries.
• Contact your local waste management officials for other information regarding the environmentally sound recycling and disposal of lead-acid batteries.
• The battery must be charged only by adult. Please charge the product before using!

TROUBLESHOOTING

one
charging socket damaged| replace the socket with new one
AC adapter not connected| connect the plug into a socket
shod range| batteries not fully charged| charge the batteries fully up
worn out| replace the battery with a new one
jamming during driving| loose cables| connect the cables back together
damaged motor| repair or replace the motor
loud noises| damaged motor| repair or replace the motor
RC not working| RC batteries depleted| replace batteries with new
car out of range| stand closer to the car
electromagnetic interference| move away from the EMI source
transmitter damaged| replace the RC
receiver damaged| replace the receiver unit

http://www.toyz.pl
Learn more about brand Toys by Career.
DISTRIBUTOR:
IKS 2 – Children’s Goods Distribution Centre
9 Ribnick Street, 43-190 Mikoto, Poland
+48 32 226 06 06
e-mail: toyz@toyz.pl, www.toyz.pl www.facebook.com/ToyzBrand
www.youtube.com/ToyzChannel 

References

• Zabawki dla dzieci od 6 miesięcy - Toyz.pl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>