TESLA PC250WH Panel Convector Heater User Manual

TESLA PC250WH Panel Convector Heater User Manual

Safety Instruction

• Read the user manual before installing and using the product.
• Especially follow the information regarding safety. Keep the user manual in an easily accessible place as you may need it later.
• Please remember that this user manual may also be valid for other models.
• Please follow the instructions in order to use your device efficiently in terms of energy consumption.
• Your device is for household use. It is not suitable for commercial use.
• Our company is not responsible for any injury or damage caused by not following the instructions in the user manual.

CAUTION

In order to avoid causing fire, electric shock and injury, read the safety precautions carefully and follow the warnings.

WARNING

Do not use the product if its parts are broken or damaged! Consult the nearest Authorized seller. We do not have free of charge maintenance and installation service. Customer is responsible for the installation.

NOTE
The values stated in the markings on the product or in other printed documents provided with the products are the values obtained in the laboratory environment in respect of the relevant standards. These values may change according to the use and ambient conditions of the product.

Respects the environment without harming the nature.

Suitable for WEEE Regulation.

CAUTION

This product has been produced in accordance with safety regulations. Non compliantly use may harm the person, device or environment.

SAFETY WARNINGS

1. consult in future. If you give your product to another person, give it with this manual.

2. Do not throw the package of the product without using the product or making sure that it is functioning properly.

3. Do not use the product if the accessories are absent, broken or damaged.

4. Do not use device for other than the purposes specified in this manual. (Do not use it to dry your clothes or to keep the animals or plants warm.)

5. When not using the device, turn the function button to “off” and unplug the device. Do not pull the mains cable while unplugging. Use the product from the mains voltage.

6. Do not leave your device unattended while it is functioning.

7. Do not use the product when the mains cable is damaged and call the Authorized Service.

8. Do not use your heater if it is damaged due to transportation, delivery or storage. In such a case, call Authorized Service.

9. The heater cannot be used with programmer, timer or any other setup running automatically.

10. The fireguard of this heater is intended to prevent direct access to the heating elements and must be in its place while the heater is in use.

11. Do not cover your device or use it to dry any items.

12. Your device should not be used with another device connected to the same power cable or fuse.

13. Do not use your product in places such as bathrooms, shower cabins or swimming pools.

14. The power cord should not be placed on the hot body of the device or near to it. Do not make an addition for the supply cable.
    Otherwise, it may cause malfunction, electric shock or fire.

15. If your device will not be used for a long time, will be moved, cleaned or adjusted, unplug the device and be sure that it is cool.

16. Do not place the heater just below the socket.

17. Never expose the heating elements to water.

18. The device must be unplugged during installation, maintenance or repair.

19. While unplugging the supply cable do not pull the plug from the cable or touch it with wet hands, and be careful not to crush it under heavy objects.

20. Turn off your heater using the heater element function button and unplug it.

21. Keep your device in a dry and closed area.

22. Perform the periodic maintenance and cleaning of your device according to the instructions in this manual.

23. Do not use the heater while you are sleeping or away from the device.

24. Avoid using extension cord, it may cause fire due to overheating.
    If you have to use an extension cable, the cable section should not be less than 2mm2 (14AWG).

25. Use the device on a flat and even surface. The device should only be used on its feet.

26. Do not move the device while it is in use. Do not touch the device right after turning it off.

27. During the first use of your device, a slight smoke and odor may occur, this is normal and will disappear in time.

28. Fingers or other objects should not be inserted into the air inlet and outlet channels.

29. This heater is not suitable for use in greenhouses and construction sites.

30. There must be a minimum distance of 1 meter between the device and creatures, materials such as curtain, wood, cardboard, fabric etc. and other devices.

31. Do not operate the device within 7.60m distance to flammable and explosive materials (gasoline, alcohol, etc.) and do not place it near motorized devices that are not expected to operate.

32. Unless supervision and management of the use of the device is provided, this device is not intended for use by persons with physical sensory and mental disabilities (including children) or those with lack of supervision and knowledge.

33. Children under the age of 3 should be kept away when they are not attended by an adult.

34. Children in this age group should be kept away from the processes such as plugging the device or arranging, cleaning and maintaining it.

35. This device can be used by children aged 8 and above and persons with a lack of physical, sensory or mental abilities, or lack of experience and knowledge only if they have been given supervision or they understand the instruction regarding its safe use and the dangers involved.

36. Children should not play with the device. Cleaning and maintenance should not be performed by children unattended.

37. Packaging materials can be dangerous to children. Keep the packaging materials out of the reach of children or dispose of them by classifying them in accordance with the waste instructions. Do not throw it away with normal household waste.

38. ARNING: Do not cover the heater in order to prevent overheating. Never close the ventilation channels.

39. WARNING: Do not cover your device or use it to dry any items.

40. WARNING: Do not use your product in places such as bathrooms, shower cabins or swimming pools.

41. CAUTION! Some parts of this appliance may become very hot and cause burns. If there are children, disabled people or people with the potential to be injured due to the device, be careful to those people especially.

TECHNICAL SPECIFICATIONS

This product has been produced in accordance with safety rules and directives in force.

NOTE
The values stated in the markings on the product or in other printed documents provided with the products are the values obtained in the laboratory environment in respect of the relevant standards. These values may change according to the use and ambient conditions of the product

INSTALLATION

Your device is completely ready to use and does not require any assembly or electrical connection.
CAUTION!
Before plugging in, make sure that the Power is in the OFF position.

INSTALLING ON WALL

• If you want to install it on the wall, do not mount the feet.

• Your heater can be used hanged on the wall. Your heater should be placed horizontally according to the minimum distance to be followed (Figure 1).
  

• To hang your heater on the wall, you need to use 2 screws and 2 dowels supplied with the product. Drill the screw holes in the wall with an interval measure of 480 mm.

• Hang the device on the wall and fix it horizontally using the fixing holes (Figure 2)
  
  

OPERATING THE DEVICE

Mount the feet to the body of your heater with the screws shown in Figure 2.

• After placing your heater in one of the positions shown in the figure, plug it in a grounding socket.
• Smoke and odor may occur due to the first use of your heater.
• You can operate your heater in two steps as low power and high power.
• You can operate your heater at the desired temperature level between 1 and 9.

MAINTENANCE AND CLEANING

• Before starting to clean your device, turn off the device, unplug the power cord for safety and wait for the device to cool down.
• The outer surface of the device should be cleaned with a soft, cotton, slightly damp cloth or a soft brush.
• Never use abrasives or solvents to clean the heater.
• Do not clean the product with substances such as gasoline, thinner solvent, etc. that will corrode or damage the product.
• These substances can damage plastic parts.
• Do not clean your device using steam cleaners.
• Do not expose your device to water.
• Never immerse your product in any liquid for cleaning.

TROUBLESHOOTING

the plug into the socket Start the device
Try another socket
Call the Authorized Service
The device is very hot| The device may have been operated for too long| Let the device cool down
The device stops automatically while it is working.| The safety system on the device is activated.| Let the device cool down, if the problem continues, call the authorized service.

STORAGE

When storing your device, you can wrap the power cord and place it in the cradle on the back of the device. Before winding up the power cable, you must definitely wait for the device to cool down. When not in use, keep your device in a dry place.

DELIVERING AND TRANSPORT

The device must be transported in its original packaging or in a good and soft package to prevent damage to the device. Follow the signs on the packaging.

RECYCLING

**SUITABLE FOR EEE REGULATION

**

WEEE: This device should not be disposed of as it consists of recyclable parts in accordance with WEEE directives. Please contact the nearest collection center to recycle this device. Keep the packaging materials out of the reach of children or dispose of them by classifying them in accordance with the waste instructions. Do not dispose of your device and its packaging with normal household waste.

DECLARATION OF CONFORMITY

We, Comtrade Distribution doo Beograd, Bulevar Zorana Dindiea 125i, hereby declare that the following products listed below to which this declaration relates

Name of manufacturer
TESLA/Comtrade Distribution d.o.o. Beograd

Contact information of the manufacturer
Bulevar Zorana Dindiea 1251
11000 Belgrade, Serbia

Description of the appliance: Panel convector heater

Tesla model| Laboratory| LVD Certificate No.
LVD Test Report No.| EMC Certificate No.
EMC Test Report No.
---|---|---|---
Tesla PC251BL/PC250WH| SGS| TR_2020524_1| TR_20227501

Conform with the following standards:

Applicable Harmonized Standards| Title of the relevant legislative act(s)
---|---
EN 55014-1: 2021/ C1SPR 14-1:2020|
EN 55014-2: 2021/ CISPR 14-2:2020|
EN lEC 61000-3-2: 2019+A1:2021|
IEC 61000-3-2:2018+A1:2020| Electromagnetic Compatibility (EMC)
EN 61000-3-3: 2013+A2:2021| 2014/30/EU
IEC 60335-2-30:2009, COR1:2014, AMD1|
IEC 60335-1:2010, COR1:2010, COR2:2010,|
AMD1:2013, COR1:2014, AMD2: A2:2016|
EN 60 335-2-30: 2009 +A11: 2012:|
EN 60335-1:2012 + AC:2014 + A11:2014 A13:2017 +|
A1:2019 + A14:2019 + A2:2019 EN 62233:2008 +| Low Voltage Directive (LVD)
AC:2008| 2014/35/EU

This declaration of conformity is issued under the sole responsibility of the manufacturer.

Date: 07.07.2022 Belgrade, Serbia
SIGNATURE & CHOP1
NAME: Nebojsa Lozo /% 411
POSITION: General Manager

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>