GODIGITALLOCK Digital Door Lock LH310MG User Manual

GODIGITALLOCK Digital Door Lock LH310MG User Manual

Thank you for purchasing our product. Please read through the manual prior to starting using the product.

• This manual contains product warranty. Please fill up the warranty with details on installation shop, contact information and data of installation to receive A/S under warranty.
• Product features and design may change without prior notification in order to improve product quality.

The images contained in this manual are only reference used for description and instruction and its types and colors may differ in accordance with the product model.

Safety cautions

Caution
Since the product is keyless door lock, a part of door lock may need to be damaged in case of malfunction.

It needs to be familiar with how to use manual closing and opening device in case of emergency.

1. Voltage: DC6V /
2. Be cautious that reverse installation of batteries causes liquid leakage or a burst.
3. When battery is flat, replace all batteries and DO NOT use used batteries with new one.
4. Sensor operation temperature: 60°C (±10°C)

Product Structure and Name

Outdoor body (Types and colors of outdoor body will differ depending on the model.)

Basic components (Check if your product contains all contents.)

• Basic components (Extra accessories) and its quantity may differ depending on the product model (Opening/closing function)
• Types and colors of card/key tag (Remote control) may change.

Indoor body (Types and colors of indoor body will differ depending on the model.}

• Open /Close button: One touch button which is used to open or close door from inside
• Input button( ): Used when registering password or registering/deleting card/key tag or remote control.
• Manual opening and closing device: Used to manually open and close door (Use this function in case of fire or other emergencies)
• Dead bolt (Latch): Indoor latch for door lock
• Fire detection sensor: Built-in fire detection sensor to automatically open a door in case of fire (60°C±10°C)

1. Master Mode

Set in Master Mode

Registering/Changing User Password In Master Mode

Registering/Deleting User Card In Master Mode (Applied model)

Registering/Deleting Remote control In Master Mode (Applied model)

Registering/Deleting Fingerprint In Master Mode (Applied model)

* Notice

• The deletion of fingerprints causes all the existing. registered ones to be deleted.
• After the deletion, register the fingerprints to be used a new.
• The fingerprints of infants in the developmental stage or some users with unique fingerprints (those which cannot be registered) may not be recognized.
• Scanning foreign substance (sweat and moisture)-stained fingerprints or dry fingerprints may lead to failure to recognize fingerprints.
• Stay clean the fingerprint input unit so it is not stained with foreign substances and do not use a wet finger.
• If fingerprint recognition is not successful, input and use the fingerprints of another finger.
• Registered fingerprints may be also registered in a duplicate manner.

2. Raven to Non-Master mode from Master mode

Registering/Deleting User Card In Non-Master Mode (Applied model)

Registering/Deleting Remote control In Non-Master Mode {Applied model)

About product warranty

1. This product is manufactured under the strict quality management and inspection.
2. Free A/S for within warranty period is provided for any technical problem if a product is used in a normal circumstance. Even within warranty period, if a case is matching with items described in paid service guide, service charge (Repair, parts and travel fee) will apply.
3. It is required to present this warranty card when requesting repair service.
4. Please keep this warranty card carefully as it is not re-issuable.
5. When re-installing a product due to relocation or more, installation and travel fee will apply.
6. A product cannot be returned or exchanged after installation except in case of serious defect of a product. (It is in accordance with compensation criteria for consumers’ damages.) 

Requesting service

1. Please check instructions in user manual and check-list in case of malfunction prior to contacting us.
2. If the problem persists, stop using a product and contact sales agency/HQs. XIt is very dangerous to try to repair a product yourself. X Please provide the following information when contacting us: Model name, date of purchase and place of purchase / Address, name, contact number and home address / Symptoms (In detail)

Free paid service (Criteria in detail)

Service fee is charged in accordance with Consumer Protection Act. (Based on Article 5. Compensation Criteria for Consumers’ Damages, Consumer Protection Act.) Service fee consists of part cost and travel repair fee and each fee is determined by the followings. Service fee = part cost + travel repair fee (Repair service fee)

• Free repair: Problems in performance or function occurred within warranty period while using a product in normal way.
• Paid repair: After warranty period or in the following cases within warranty period In case of ‘User error / Service request for How-to question or forgotten password (Loss of key) / Request to check up product without precise defect / Malfunction after installing a product by consumer / Damage caused by external impact / Malfunction caused by incorrect way of inserting or replacing batteries / Damaged cover when consumer replaces battery / Malfunction or quality issue caused by using chemical materials / Request for re-installation due to faulty installation (Alter front location)

For models with emergency key, product damage caused since consumer did not take emergency with him/her / Product malfunction caused by condensation

• Part cost: Part cost refers to cost of part(s) which is required for product repair
• Travel repair fee: Travel repair fee applies to paid service and is total of technical fee in accordance with required level of difficulty (Time) and travel fee.

Registering/Deleting Fingerprint in Non-Master Mode (Applied model)

* Notice

• The deletion of fingerprints causes all the existing. registered ones lo be deleted.
• After the deletion, register the fingerprints to be used a new.
• The fingerprints of infants in the developmental stage or some users with unique fingerprints (those which cannot be registered) may not be recognized.
• Scanning foreign substance (sweat and moisture)-stained fingerprints or dry fingerprints may lead lo failure to recognize fingerprints.
• Stay clean the fingerprint input unit so it is not stained with foreign, substances and do not use a wet finger.
• If fingerprint recognition is not successful, input and use the fingerprints of another finger.
• Registered fingerprints may be also registered in a duplicate manner.

3. Common Features

Fault diagnosis and troubleshooting

Product specifications

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>