Crayola CHPBT348 Boost Active Wireless Headphone User Manual
- June 3, 2024
- Crayola
Table of Contents
CHPBT348 Boost Active Wireless Headphone
User Manual
BOOST ACTIVE
Wireless headphone
Model: CHPBT348
How to connect:
Turn on your headphone’s BT and search for the device and select Bluetooth
name of ” CHPBT348 ” Voice notice appear when connected successfully, (play
and select music with headphone when connected through BT).
Key Operating Instructions
| Button | Operation and function |
|---|---|
| Long press three seconds is power on/off | |
| 1 In wireless mode, when get the calling. Short |
Press to answer the calls; Long Press is Refuse to listen, continuous push 2
times is redial.
2 Playing: Short Press: Play/Pause;
| ①In Wireless/MP3 mode, Short Press: Previous track; Long Press: volume down
②In FM mode, Short Press: Previous channel; Long Press: volume down
| 1 In Wireless/MP3 mode, Short Press: next track; Long Press: volume up
2 In FM mode, Short Press: next channel; Long Press: volume up
M| Short Press to change the mode,Wireless/MP3/FM Radio
LED Indicator
-
Wireless mode:
a) Pairing status blue and red light flashing alternately;
b) Paired status, the blue light slowly flashing. -
In MP3 mode: the blue light will slow flashing when playing;
-
In FM mode: When listening to the radio station, blue light: search radio flashing.
-
In charging mode:
a) Charging: the red light is on steadily
b) Fully charged, it turns into a blue light. -
Insert audio line, Go directly to the AUX LINE IN pattern, at this time for ordinary headset headphones, buttons
-
Support mobile phone/iPod/MP4/MP3/CD/PC,etc
Specifications
| Bluetooth version | Bluetooth 5.0 |
|---|---|
| Operating distance | 32.8 Feet |
| Working time | 5-6hours |
| Speaker sensitivity | 85dB |
| Charging time | 2hours |
| Driver unit : | 40mm, 32Ohms |
| Built-In Battery | 150mAh |
(Note: Battery life & charging time may vary based on usage & types of devices used.)
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>