Crayola ULTIMATE Light Board Instruction Manual

: June 8, 2024
: Crayola

Table of Contents

Crayola ULTIMATE Light Board
Contents
- For Best Results
Installing and Replacing Batteries
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Crayola ULTIMATE Light Board

Work on a flat, clean protected surface.
Use only Crayola Gel FX markers on the drawing surface.
Lighting effects work best in a dark room.
Wipe off marker from drawing surface & board with damp cloth or paper towel. Dry completely before re-use or storage.
DO NOT IMMERSE UNIT IN WATER.
Slide Power Switch to OFF position to turn off unit.

Installing and Replacing Batteries

CAUTION: BATTERIES MUST BE INSTALLED BY AN ADULT ONLY.

We recommend using non-rechargeable batteries.

REQUIREMENTS: 3 AA Alkaline Batteries (not included), Phillips Screwdriver (not included).

Use Phillips screwdriver to loosen two (2) screws from the battery cover on the back of the Light Board. Remove any unused batteries and dispose of properly.
Insert three (3) AA alkaline batteries and match direction to diagram inside battery case.
Replace battery cover and tighten screws.

Draw, Dazzle, Display!

Draw, doodle, design or message with Mini Gel FX markers.
To trace, pull out black panel & lay Light Board face-up over desired picture, photo or design. Re-insert panel when finished.
Slide the Power Switch to ON position. Twist display feet out & stand Light Board upright.
Turn off room lights & press Light Effects Button to start the light show. Get a different effect each time you press!
- Press 1 time: Light up.
- Press 2 times: Lights blink.
- Press 3 times: Lights cycle in fade on & off pattern.
- Press 4 times: Sleep mode (Saves battery)

CLEANUP & STORAGE

Unit may be wiped down with damp cloth or paper towel.
DO NOT IMMERSE UNIT IN WATER.
Ensure Power Switch is in OFF position.
Remove batteries from the unit if Light Board will not be used for a long period (several months).

WASHING & CARE INFORMATION

FOR BEST RESULTS: Crayola Gel FX markers wash from skin and most washable clothing. Wash promptly in hot wash cycle. Do not use prewash or chlorine bleach. Repeat laundering may be required.

STAIN ADVISEMENT: Crayola Mini Gel FX Markers contain colorants that may stain. Keep away from wallpaper, painted walls, finished & unfinished wood, vinly, leather and kitchen appliances.

BATTERY SPECIFICATIONS & CAUTIONS
Requires 3 AA batteries 4.5 V (DC). Rechargeable batteries are only to be charged under adult supervision. Rechargeable batteries are to be removed from the toy before being charged. Non-rechargeable batteries are not to be recharged. Different types of batteries or new and used batteries are not to be mixed. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the toy. The supply terminals are not to be short-circuited.

NO BATTERIES INCLUDED
The Wheelie Bin symbol indicates that the product and the batteries must not be disposed of with other household waste as they may contain elements which can have a harmful effect on the environment and human health. Please use designated collection points or recycling facilities when disposing of the item and the batteries. To help locate your nearest facility see: www.recyclenow.com

QUESTIONS
U.S.A. & Canada: / États-Unis et Canada : /E.U.A. y Canadá : 1-800-CRAYOLA (800-272-9652), M-F 9 AM-4 PM ET /en semaine, de 9 h à 16 h, HE / Lun.-Vie., 9 AM-4 PM Hora del Este

©2018 CRAYOLA, EASTON, PA 18044-0431. BINNEY & SMITH (EUROPE) LTD., BEDFORD HEIGHTS, MANTON LANE, BEDFORD, MK41 7PH, ENGLAND/ANGLETERRE/INGLATERRA.
DISTRIBUTED IN AUSTRALIA BY CRAYOLA (AUSTRALIA) PTY LTD. IMPORTED BY CRAYOLA CANADA, LINDSAY, ON, K9V 2N5.

CAN ICES-3 (B)/NMB-3(B)

CAUTION: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or experienced radio/TV technician for help.