Soundpeats TrueAir2 True Wireless Earbuds User Manual
- June 8, 2024
- SoundPEATS
Table of Contents
User Manual
Soundpeats TrueAir2 True Wireless Earbuds
Package Content
Specifications
Product Diagram
Button Control
Wearing
- Identify the le and right earbuds.
- Rotate earbuds to nd most comfortable angle.
Getting Started
Pairing
- Take both earbuds out of the charging case while the case is with enough power left, the left and right earbuds will pair to each other at rst with a prompt suggests successfully connected. Aer this, the le indicator will turn white, and right indicator ashes in red and white alternately with a voice prompt “Pairing” indicating the earbuds enter pairing mode.
- Activate the Bluetooth on your device and choose “SOUNDPEATS TrueAir2” to connect. The right indicator will stop ashing with a voice prompt “Connected”.
- SOUNDPEATS TrueAir2 earbuds can remember previously paired device. To reconnect to one device, you only need to activate the Bluetooth in the device and take out both earbuds, the earbuds will automatically connect to each other, and then pair to the device. If they don’t re-pair automatically, please choose the pairing name to connect again.
- Mono mode: TrueAir2 earbuds support working with either earbud only aer successfully connected.
Factory Reset
(Try the following steps if you fail building connection between two earbuds, or between earbuds and device.)
- Clear the pairing record between the earbuds and all your devices.
- Place back both earbuds and make sure they are in charging status. Press and hold both MFBs for 10 seconds until both indicators flash in white twice.
Charge
SOUNDPEATS TrueAir2 earbuds are provided with a charging case for easy carrying and charging. It can recharge both earbuds for around 4 times.
Charge the earbuds
- Place back the earbuds in right charging slots and make sure the contactors connect.
- Charging starts with red indicators staying on, and ends with red indicators going out.
Charge the case
The charging indicators don’t stay on red aer placing back the earbuds, please charge the case then.
- Use a Type-C adapter to charge the case (current not over 1A). The LEDs stay on red while charging, and go out aer fully charged.
- Please charge the earbuds and case at least once per 3 months when not in use for a long time.
Warranty Regulations
We warrant this product to be free from manufacturing defect for 12 MONTHS.
support@soundpeatsaudio.com
www.soundpeatsaudio.com
Please scan the QR code or search the link below for detailed PDF manual.
https://soundpeatsaudio.com/downloads/
Qualcomm
Qualcomm aptX, Qualcomm TrueWireless and Qualcomm cVc are products of Qualcomm
Technologies, Inc. and/or its subsidiaries.
Qualcomm and Qualcomm TrueWireless are trademarks of Qualcomm Incorporated,
registered
in the United States and other countries.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection
against harmful interference in a residential installation. This equipment
generates uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two
conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could
void the user’s authority to operate the equipment.
MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited
Room 1308-1309, Building B, Huihai Square, Chuangye Road,
Longhua District, Shenzhen, China. 518109
support@soundpeatsaudio.com
www.soundpeatsaudio.com
Read More About This Manual & Download PDF:
Soundpeats TrueAir2 True Wireless Earbuds User Manual – Optimized
PDF
Soundpeats TrueAir2 True Wireless Earbuds User Manual – Original
PDF
Questions about your Manual? Post in the comments!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>