Azoula AZ220614A Smart Hub User Manual

June 12, 2024
Azoula

Azoula AZ220614A Smart Hub User Manual

Azoula AZ220614A Smart Hub User Manual

Azoula Smart Hub Introduction

Azoula Smart Hub is the brain of Azoula’s ecosystem. It can be connected with an Ethernet network, and supports interaction and connection with Azoula Zigbee accessories through Azoula Home app via ZigBee 3.0 wireless protocol.

Azoula AZ220614A Smart Hub - Azoula Smart Hub
Introduction

Download and Install App

Download Azoula Home app from App Store or scan the QR code below. Follow the direction in the app to connect your devices properly.

Qr code icon

Connect Azoula Smart Hub to power

Connect the power adapter to the Smart Hub and plug it to mains socket.

Azoula AZ220614A Smart Hub - Connect Azoula Smart Hub to
power

Connect Azoula Smart Hub to network

Connect Smart Hub’s LAN port to a router with network cable. Make sure the cell phone for control connects to the same network.

Azoula AZ220614A Smart Hub - Connect Azoula Smart Hub to
network

Setup the Smart Hub in Azoula Home App

Azoula AZ220614A Smart Hub - Setup the Smart Hub in Azoula Home
App

  1. Tap “+” at top right corner of Home page in Azoula Home App.
  2. Tap “Add Bridge” on the menu.
  3. Scan the HomeKit setup code as prompted onscreen.
  4. Select your Smart Hub and follow the directions to complete setup.

Setup Azoula Smart Hub in HomeKit

Azoula AZ220614A Smart Hub - Setup Azoula Smart Hub in
HomeKit

  1. Tap”‘ +”on the top right corner in Home app of iOS.
  2. Tap “Add Accessory” on the menu.
  3. Scan the HomeKit setup code as prompted onscreen.
  4. Select your smart hub and follow the directions to complete setup.

Indicator Lights State

Azoula AZ220614A Smart Hub - Indicator Lights State

Reset to Factory Default

Press and hold the reset button for over 5 seconds until the running indicator flashing blue 6 times rapidly.

Reboot

Short press the reboot button to reset power of the smart hub, all indicators will turn off, then the gateway will restart.

Azoula AZ220614A Smart Hub - Reboot

How to open Zigbee Network Manually

Short press Zigbee Network manual open button 5 times continuously to open Zigbee Network manually, which will allow the endpoints to join the network.

How to put the gateway back in advertising unpaired mode when last admin pairing is removed:

There are 2 methods as follows:

  1. Restart the smart hub by resetting power of the gateway
  2. Factory reset the smart hub by pressing and holding reset button for over 5 seconds

Notes

  1. Ensure the hub and the cell phone for control are on the same network
  2. Each hub supports connecting up to around 150 devices.
  3. Do not soak or wash your devices.

Controlling this HomeKit-enabled accessory automatically and away from home requires an Apple TV with tvOS 14.0 or later or an iPad with iOS 14.0 or later set up as a home hub.

Communication between iPhone, iPad and the HomeKit enabled Gateway is secured by HomeKit technology.

Use of the Works with Apple Home badge means t hat an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards.

Apple, Apple TV, Apple Watch, i Pad, iPad Air, iPad Pro, iPhone, and Lightning are trademarks of Apple Inc., registered In the U.S. and other countries. tvOS is a trademark of Apple Inc.

You can easily and securely control accessories t hat are compatible with Apple Home such as lights, doors, thermostats, and more with the Home app and Sfr1 on your iPhone, iPad, Apple Watch , HomePod, HomePod mini, or Mac using Apple HomeKit technology.

Controlling this HomeKit-enabled accessory requires an iPhone or iPad. Adaptive Lighting requi res a HomePod, HomePod mini, or Apple TV set up as a home hub. It is recommended that you update to the latest software and operating system.

To control this HomeKit·enabled accessory, the Latest version of iOS or iPadOS is recommended. A customer who owns an Apple TV (4th generation or later) with tvOS 10 or later or a HomePod or HomePod mini can control HomeKit-enabled accessories away from home and automatically through triggers such as time of day, location, sensor detection, or the action of an accessory.

The Azoula Smart Hub enables endpoints HK-ZD·CCT·A,
HK-ZD-RGBCCT-A, HK-LN-DIM-A, HK-SL-DIM-EU-A, HK·SL-DIM·US·A,
HK-LN-SOCKET-A, HK-SENSOR-4IN1 -A, HK-SENSOR-CT-A,
HK-LN-HEATER-A to work with HomeKit technology. See user manual of the endpoints for more details.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals