LEDWOOD LD-I9W-TWS 5.0 Wireless Stereo Earphones User Manual

: June 3, 2024
: LEDWOOD

Table of Contents

LEDWOOD LD-I9W-TWS 5.0 Wireless Stereo Earphones
FEATURES
TROUBLESHOOTING
SAFETY INSTRUCTIONS
FCC WARNINGS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LEDWOOD LD-I9W-TWS 5.0 Wireless Stereo Earphones

FEATURES

High-quality wireless stereo headset
High definition, isolation and noise reduction, piston type
The rechargeable house can be supplied to two earphones for 3 cycle recharge
Headphones are full of electricity, which can support up to 4/5 hours of telephone or music playback time.
You can play any audio files of the paired Wireless device
Built-in microphone hands-free phone
Waterproof, antiperspirant
Comfortabie and lightweight in-ear design
Open Charging Box Automatic Boot-up Matching Function
The earphone automatically turns off, and the auto charging function is put into the charging box.
This product supports wireless charging

TECHNICAL PARAMETERS

Playtime: 4/5 hours
Product Functions: Automatic switching function of master and slave headphones, call function, music playing
Material Technology: ABS Environmental Protection Material
Type of socket: Micro charging port
Power supply mode: built-in lithium battery / Micro charging port
Conventional color: 6 colours are available
Headphone size: (R)57*(H)27mm
Product size: 90×36.5x140mm
Net weight of product: single ear 3g machine 36g
Wireless version: 5.0
Play format: A2DP/AVRCP/HFP/HSP
Specification of bayonet horn: Composite membrane Ø6mm
Distortion rate: THD < 1%
Wireless Distance: Effective Transmission Distance (> 15M)
Frequency response: 20HZ-20KHz
Sensitivity: 107 B SPL+/-3dB
Charging parameters: earphone: 5V40mA charging seat: 5V330mA
Battery capacity: headphones: 55mAh charging seat: 300mAh belt protection

PACKAGE CONTENTS USB Charging Cable / Earphone Storage Warehouse / Earphone / Instruction

OPERATION INSTRUCTION Turn on automatically after opening the charging bin.
WIRELESS PARING
A. Open the charging bin and the two headphones will match automatically. Note: The products have been matched well when they leave the factory, if there is no self-matching situation, Please put it in the charging bin again and charge it for 5 seconds before removing it for automatic matching.
B. Click on phone settings > Wireless
C. Click the product search code to connect the headset
D. Wireless earphones connected successfully
Find the corresponding Wireless name TWS-I9W point from the Wireless list of mobile phones Click on the connec-tion pair, about 5 seconds voice prompt connection success, left and right headphones There will be hint tone “bang“ light tone hint, the connection is successful.
When the same cell phone is used again, only the back hand of the earphone needs to be removed from the charging bin.
Opportunity automatically completes the connection pairing operation. If used for another mobile phone, The above matching steps need to be repeated.
CHARGING INSTRUCTIONS
POWER OFF It can shut down automatically when it is put into the charging bin.
CALL
MUSIC

TROUBLESHOOTING

If the headset canâ€™t connect to your mobile phone, please press the following operation

Make sure your earplugs are fully charged
Boot state
Make sure headphones and mobile Wireless are paired successfully
Ensure Wireless Device Function is Activated
Make sure headphones and mobile phones are within 15 meters of the main device, or your media Are there no N bar-riers, such as walls or other barriers, between the device and the headset It will affect the effect of Wireless reception.
If you want to use the right earphone alone, please remove the right earphone from the charging bin. The left earphone must be placed in the charging bin and closed. Then wait 2 minutes for the phone to search for the right ear device name TWS-I9W
If two headphones are found to be mismatched, let the phone drop Wireless first, charge the two headphones in the charging bin for 10 seconds, and then take them out, when the red and blue lights of the other headphone flash out. Represents the success of the pairing, and then opens Wireless to connect.
How to restore factory settings If you find that the earphone is “dead“ or not, remove the earphone from the warehouse and touch the contact for 8 seconds. Above restore factory settings.

SAFETY INSTRUCTIONS

Please read these safety warnings and cautions carefully to ensure your personal safety and prevent property damage
Check the local laws, equipment and earplugs that use the media, and we use earplugs to have sound insulation, while keeping your attention, walking on the road, safety problems when driving.
Far away from children, because the earphone is small, some parts may cause suffocating danger.
Observe all signs indicating electronic equipment Or RF radio products have to turn off
These areas may destroy the hospital Aircraft, explosive areas, and potential explosives At the gas station.
Do not place or store earplugs in the rear seat of the car or in the car. High temperature may cause lithium battery expansion or combustion (because headphones have lithium batteries).
Don’t put earplugs directly in the sun.
Do not place earplugs near fire, cooking, burners, candles, fireplace
Keep the machine away from the heat source, the most sunlight, water and other liquids.
Keep the machine away from the cup. There are electric shocks, explosions and damage to the products.
Do not open or damage the earphone or charge box battery
According to the safety regulations of batteries, batteries are not treated as household garbage.
Batteries cause leaks, electrolyte materials.
It is forbidden to disassemble the machine or destroy the machine.
Do not put earphones in high altitude or very low humidity.
Don’t throw the machine into the fire An explosion may cause injury or death.

CAUTION

Do not use abrasive cleaners, they Could cause scratches or damage
Do not let the machine contact with sharp objects because objects can cause scratches.
Do not insert anything in the slot of the machine, otherwise it will damage the internal circuit.
Do not try to repair, repair, or disassemble the machine
Do not attempt to replace batteries, earplugs and charging boxes. Lithium batteries are built-in. The user can’t change it.

FCC WARNINGS

Warning : self change or repair machine will be cancelled to customer warranty service. Note: the machines are gua-ranteed to be qualified and packaged. If the machine is not used, shelved or stored, please turn off all power supply (package charge box and headset) so as not to radiate the radio frequency, which may cause harmful interference, such as the neighbour of residential community can search the Bluetooth device.

WARNING!

Do not use this product in the process of driving, so as not to cause accidents.
It is forbidden to insolate in cars, so as not to cause traffic accidents.
Can’t throw the product into the fire, the water
It is not allowed to use in hospitals, airports and other non interference places.

GUARANTEE VOUCHER

This product benefits from a guarantee in accordance with national regulations.
Please note that the following circumstances do not belong to the three package range.
More than three packets of validity
The damage caused by the use of the instructions is not used in accordance with the instructions.
Damage caused by self dismantling;
No three packages of vouchers and invoices;
Unauthorized alteration of three packages of vouchers;
The product models of three packages of vouchers are not in conformity with the goods.
No factory name, plant location, production date and product qualification certificate.
Damage caused by force majeure

EC DECLARATION OF CONFORMITY
Hereby, we :
PRIMETIME – Parc d’activité des Moulins de la Lys
Rue Fleur de Lin, Cellule 7 – 59116 HOUPLINES – FRANCE

Declare that below product(s) :

Product …………………………………………………………………………………………………………………. Earphones Bluetooth
Model number …………………………………………………………………………………………………………… LD-I9W-TWS-PAST
Factory model number ………………………………………………………………………………………………………………. S9-TWS
Commercial brand …………………………………………………………………………………………………………………. LEDWOOD

Complies (comply) to the essential provisions of the EC directive(s) :

Low Voltage directive ………………………………………………………………………………………………………….. 2014/35/EU
EMC directive …………………………………………………………………………………………………………………….. 2014/30/EU
EuP directive ………………………………………………………………………………………………………………………. 2014/30/EU
ROHS directive …………………………………………………………………………………………………………………. 2015/863/EU

The essential provisions of the following harmonized standards : EN 60950-1 : 2006+A11 : 2009+A1 : 2010+A12 : 2011+A2 : 2013 EN 62479 : 2010
EN 301 489-1 V2.2.0 : 2017-03
EN 301 489-17 V3.2.0 : 2017-03
EN 300 328 V2.1.1 : 2016-11

Date ……………………………01 05 2020
Name …………………………….. WALLYN
Fonction ………………………… GERANT

LEDWOOD is a trademark owned by Primetime Copyright 2020
All rights reserved Primetime 2020
Imported and distributed by Primetime Moulins de la Lys business park
Fleur de Lin Street, Cell 7
59116 HOUPLINES – FRANCE
Made in the PRC