LEDWOOD XTREME 360 User Manual

June 6, 2024
LEDWOOD

LEDWOOD logo

LEDWOOD XTREME 360

For correctly operating, please read this manual carefully before using it. Any content revise of the French manual won’t declare again, and we are not responsible for consequences caused by fault or oversight of this manual.

SPECIFICATION

Bluetooth Wireless
Bluetooth Version …………………………………………………….V4.2+BR
Bluetooth Profiles …………………………………………………….A2DP AVRCP
Bluetooth transmit power……………………………………………..4dbm
Bluetooth Range …………………………………………………………..10M
General
Battery Capacity: ……………………………………………………………7.4V,4400mah
Charging Time: ……………………………………………………………….5.5H (by 1A Adapter)
Battery Type ………………………………………………………………………Lithium-ion 18650
Charge Input / Power Supply ………………………………………………..5V DC, 2A
Play Time at 50% volume ………………………………………………………… 4H
Play Time at 100% volume …………………………………………………………2.5H
Signal to Noise Ratio: ………………………………………………………………….65dB(BT)
Frequency Response ……………………………………………………………………80HZ-15KHZ
Low electric power prompt voltage set by Software …………………………..6.6V
Auto-off voltage set by Software …………………………………………………………6.2V
Maximum power distortion ……………………………………………………………….22%
Total RMS Power Output ……………………………………………………………….70W
Total Peak Power Output………………………………………………………………….80W RMS – 800w musicaux
FM Frequency ……………………………………………………………………………………..87.5MHz-108MHz
Tweeter
Tweeter Size ……………………………………………………………………………. 2.5 inch
Tweeter Quantity: …………………………………………………………………….4
RMS Power ……………………………………………………………………………4W
Peak power ………………………………………………………………………………5W
Impedance…………………………………………………………………………………4Ω
Subwoofer
Subwoofer Size ……………………………………………………………………………5.25 inch
Subwoofer Quantity: ………………………………………………………………….1
RMS Power ……………………………………………………………………………27W2
Peak power ………………………………………………………………………………..30W
2
Impedance…………………………………………………………………………………….4Ω
Accessories
AUX Cable
USB Charging Cable
Microphone
User Manual
Inputs
USB
Wired Microphone …………………………………………………………. (6.35MM)
AUX
Features
TWS
FM Radio
Bluetooth
AUX
LED …………………………………………………………………………….RGB light

INSTRUCTION FOR APPEARANCE AND KEY

LEDWOOD XTREME 360 - APPEARANCE AND KEY

1 Backward/Volume down
2 Forward/Volume up
3 Play/Pause
4 Power On/Off
5 TWS button
6 Mode (Switch Bluetooth, USB disk, FM and AUX-IN state)| 7 Light control
8 AUX In
9 USB Port
10 Wired Mic Port
11 Charging jack
---|---

BLUETOOTH

  1. Turn the power button to “ON”, The LED light turn blue and twinkle quickly, then enter Bluetooth mode.
  2. Activate Bluetooth of mobile phone and search for device name “XTREME360” then connect it. The blue LED light will keep lighting and make a tone once connected.
  3. Play the music from your mobile phone and enjoy.
  4. Press the Forward or Backward button on the device or on Mobile phones to select songs you like.
  5. Press the Play/Pause button on the device or on Mobile phones to play/pause the music.
  6. Long press the Forward or Backward button to adjust volume up and down. Or adjust the mobile phones’ volume.

PLAYING MUSIC FROM A USB DISK

  1. Turn the Power button to “ON”.
  2. Insert a USB flash disk into the slot, the speaker will make a tone, and play the stored music automatically.
  3. Under playing mode, short press Forward or Backward button to select songs you like, long press to adjust the volume up and down.
  4. Press Play/Pause to play or pause.

Remark Under Bluetooth playing mode, insert USB flash disk will disconnect the Bluetooth and switch to play the USB. You can press the MODE button to switch to Bluetooth mode again.

FM RADIO

  1. Under FM radio mode, the audio cable provided treats as an antenna. Please Insert the audio cable to get the best FM signal before using it.
  2. Turn the power button to “ON”, press the “MODE” button to FM mode.
  3. Under FM mode, short press the “Play/Pause” button to auto search the FM Channel and store it automatically.
  4. Short press Forward or Backward button to change the stored FM channel, long press to adjust the volume.

TWS FUNCTION

  1. Turn on two identical speakers you want to pair, please noted they must be the same BT paring name, both under BT mode. Only need to set up one of the two units;
  2. Press the TWS button, the speaker will make a tone to start pairing, and make a tone again once successfully paired;
  3. Make Bluetooth connection with your mobile phone to play music by the two paired Speakers to create a more powerful surround sound effect.
  4. When you want to exit the TWS mode, press the TWS button again to exit the TWS function.

Note

  1. Users need to make a TWS connection first, then make a Bluetooth connection with the mobile phone.
  2. Under TWS mode and Bluetooth connected, when the user long-press the TWS button, both the TWS connection and Bluetooth connection will be disconnected.

AUX-IN
For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to connect from the device’s “Line Out” to the “Aux In” of this device to enjoy playing music.
Under any playing mode, When you use the audio cable to connect the device, it will auto switch to the AUX mode.
Under AUX mode, all functions can be controlled by an external device.
REMARKS

  1.  When Bluetooth connection with your mobile phone, there will be a battery icon indicating the speaker battery volume on your phone.
  2. Press the MODE button to switch the different modes, the order is Bluetooth, USB disk, FM radio, and AUX-IN.
  3. When the speaker Bluetooth connected with one mobile device, the user can long-press the TWS button to disconnect the previous device, then make a Bluetooth connection with another mobile device;
  4. The default volume is at 50% status of max volume;
  5. Under Bluetooth connection status, the user can long-press Play/Pause button to activate voice assistant SIRI/GOOGLE ASSISTANT;
  6. The unit will turn off if no use for 10 minutes.

HOW TO CHARGE

  1. The charger is not included in the accessories. Please use the Universal 5V/1~2A charger to charge this device, and we are not responsible for any damage caused by using another charger.
  2. Power off the unit, put the provided charge cable into the charging slot of the unit, connect the other end to PC or another charger with 5V output.
  3. Charge time should be 5-8 hours. The light is red while charging, and the indicator light will switch off when fully charged.
    (When playing music during charging, please put the volume to the middle, because for some music  with heavy bass, the charger may not be able to afford the high current temporarily under the maximum volume.)

DECLARATION OF CONFORMITY
Hereby, we :
Cellule 7 – 59116 HOUPLINES – FRANCE
Declare that below product(s) :
LD-ENCEINTE NOMADE XTREME 360
model number
XTREM360
Factory model number
S281
commercial brand
REDWOOD
Complies (comply) to the essential provisions of the EC directive(s) :
Directive basse tension / LVD Low Voltage directive …………………………2014/53/EU
Directive EMC …………………………………………………….2014/30/EU
Directive RED …………………………………………………….2014/53/EU
Directive ROHS ………………………………………. 2011/65/EU& (EU) 2015/863
The essential provisions of the following harmonized standards :
EN 62368-1:2014+A11:2017
EN 62479: 2010
ETSI EN 301 489-1 V2.2.3 (2019-11)
Draft ETSI EN 301 489-17 V3.2.2 (2019-12)
ETSI EN 300 328 V2.2.2 (2019-07)
Draft ETSI EN 303 345 V1.1.7 (2017-03)
EN55032:2015/AC:2016-07+EN55035:2017+EN61000-3-2:2014+EN61000-3-3:2013

Date …………………………………………………………….01-08-2020

LEDWOOD XTREME 360 - 1

LEDWOOD logo

LEDWOOD is a trademark owned by Primetime
Copyright 2020 – All rights reserved Primetime 2020
Imported by Primetime
Moulins de la Lys business park – Fleur de Lin Street – Cell 7 – 59116 HOUPLINES – FRANCE
Made in the PRC
www.ledwood-audio.com

USER MANUAL
Download the instructions in .pdf format
You have trouble pairing the headphones,
contact us via the mail below:
[email protected]

https://drive.google.com/drive/folders/1raJK9jIHLYuOK5RWdt3PkBrJzEnb3R5X?usp=sharing

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

LEDWOOD User Manuals

Related Manuals