LEDWOOD Xtreme160 Wireless Headphones and Speakers Instruction Manual

LEDWOOD Xtreme160 Wireless Headphones and Speakers

Technical Specifications

• USB-A
• USB-C
• AUX
• TF (Memory card slot)
• USB-C power alimentation

Product Usage Instructions

Charging Instructions

1. Connect the device to a USB-A or USB-C power source for charging.
2. Ensure the battery is fully charged (approximately 5 hours, indicated by the red light turning off).
3. Disconnect the charging cable.
4. Press the main power button to switch on the product.

Functionality

The device features a TWS function for pairing and BT connectivity. It also supports AUX connectivity through a 3.5mm audio input. Users can also use the micro SD/TF or USB memory card slot for additional storage.

On/Off and Mode Selection

To turn the device on or off, press the main power button. Users can change light animation modes and switch off lights using the corresponding buttons. The device supports different modes including TF, USB, AUX, and BLUETOOTH.

FAQ

Q: What should I do if there is no power supply?

A: Check if the speaker is switched on. If it is, switch it off, connect the power cable after charging, or leave the device on while charging.

Q: How do I return the product?

A: If you wish to return your LEDWOOD product, please contact the seller from whom you purchased it. The products are covered by the European legal conformity guarantee for 2 years.

SAFETY INSTRUCTIONS

Please read this manual carefully, as it contains important information on installation and operation.

• Keep this manual for future reference. In the event of a change of ownership, please ensure that the new operator is in possession of the manual.
• Ensure that the mains voltage is suitable for this device, and does not exceed the voltage specified on the nameplate.
• To avoid risk of fire or electric shock, do not expose this device to rain or moisture. Make sure that no flammable objects are in the vicinity of the unit during operation.
• Do not expose the unit to dripping or splashing water.
• Do not place naked flames, such as lighted candles, on the unit.
• To ensure adequate ventilation, install the unit in a well-ventilated location at a minimum distance around the unit of of 50 cm. Ventilation must not be impeded by obstructing ventilation openings with objects such as newspapers, tablecloths, curtains, etc.
• Unplug the unit from the mains before carrying out any maintenance or servicing.
• The unit is intended for use in temperate climates. The ambient temperature must not exceed 40°C. Do not operate the unit at higher temperatures.
• In the event of a malfunction, switch off the unit immediately. Never attempt to repair the unit yourself. Incorrect repairs may result in damage or malfunction. Contact an authorized service center.
• Ensure that the power cord is never crushed or damaged.
• Never unplug the unit by pulling on the cord.
• Do not expose your eyes to the light source for too long.
• Batteries must be inserted with the correct polarity.
• Batteries must be disposed of safely. Dispose of them in the appropriate collection bins (ask your dealer), to protect the environment.
• Do not charge the product when it is wet.

WARNING

• Danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type.
• Batteries must not be exposed to excessive heat such as sunshine, fire or similar sources.

Prolonged use of speakers at high volume may result in irreparable hearing loss. We strongly to set your listening volume to a reasonable level. The higher the volume, the faster you risk damaging your hearing. If you wish to return your LEDWOOD product, please contact the seller from whom you purchased it. Our products are covered by the European legal conformity guarantee for 2 years.

CLASS III

Safety extra-low voltage (SELV) or protective low voltage (PLV) power supply, ungrounded masses, safe power supply (safety transformer). Danger of electrocution!

TROUBLESHOOTING

No power supply :

first check that the speaker is switched on. If this is the case, switch off the speaker, connect the power cable to the device after charging it or, once connected, leave the device switched on while charging.

Automatic shutdown :

battery protection is automatically activated when the battery is low, so please use it after recharging for5 hours.

No sound from the speaker when playback is activated

• A Check that the AUX audio cable is correctly connected to the device and the sound source.
• B Check that the volume is not set to minimum.
• C Check that the correct signal source has been selected.
• D Check that the audio source is not malfunctioning.

Unable to play music :

the music file storage path cannot be recognized, save the file and store it in the root directory of the removable device. If the device is blocked in an abnormal way, press the power button for 15 seconds to reset it.

TECHNICAL SPECIFICATIONS

Do not dispose of appliances bearing this symbol in household waste. household waste. Help protect the environment and your own safety by recycling your electrical and electronic products. The device and its packaging must be taken to your local collection point for recycling. Contact your local authorities for information on disposal and recycling. Some collection centers accept products free of charge.

Recycling: Our packaging may be subject to sorting instructions. To find out more, go to www.consigneetri.fr ENVIRONMENTAL PROTECTION – DIRECTIVE 2012/19/UE

RECHARGING THE DEVICE

CAUTION :

• If the product is to be left unused for a long period, leave the battery fully charged, otherwise it may damage the battery!
• Recharge the product at least every 2 months.
• Do not expose your device to extreme temperatures (above 50°C) (e.g. direct sunlight in an enclosed close to a heat source or radiator, etc.). High temperatures can damage the speakers and reduce battery life.

Product Overview

1. AUX 3.5 mm audio input
2. USB input
3. Memory card slot TF
4. USB-C power alimentation

CHARGING INSTRUCTIONS

1. Connect the USB Type C cable to the « USB-C » connector (4) , then to a USB socket or the mains supply via an AC adapter (not supplied). Once the battery is fully charged ((approx. 5 hours red light off), disconnect the cable.
2. Press the main power button (5) to switch on the product.

LEGEND

PAIRING AND BT CONNECTIVITY

1. Activate the wireless audio function using the « M » button (4).
2. Activate the wireless audio function on your device (smartphone, tablet, etc.).
3. Select « XTREME160 » from the list of devices found. (Simply press the « M » button several times to switch to the BT function).

TWS FUNCTION

1. Switch both speakers on and off, then press the «ONVOFF » button (9) on one of the speakers. A « CONNECTED» signal will sound. This means that both speakers are properly connected.
2. Activate your phone’s Bluetooth function and search for the association name. Establish the connection.
3. Press the «ON/OFF » button (9) to disconnect the TWS…

3.5MM AUXILIARY CONNECTIVITY

1. Connect a 3.5mm AUX jack cable to the « AUX » input (1).
2. Select the input source by pressing the « M »button (7). (Simply press the « M » button several times to switch to the AUX function).

USING THE MICRO SD/ TF OR USB MEMORY CARD SLOT

1. Insert a TF / Micro SD memory card in the « TF» slot (3) or a USB key in the « USB » slot (2).
2. Select the « TF» or « USB» input source by pressing the « M» button (7). (Simply press the « M » button several times to select the TF or USB function).

• www.ledwood-audio.com

Download the instructions in pdf format contact us via the mail below : [email protected]

References

• Tridistribution, fabricant distributeur d'organes de transmission
• Ledwood Audio - Écouteurs et Enceintes sans fils accessible à tous

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>