LEDWOOD XTREME450 500W BT Portable Speaker User Guide

LEDWOOD XTREME450 500W BT Portable Speaker

SPECIFICATIONS

Bluetooth version………………………………………………………………….. V5.0+BR+EDR+BLE

Bluetooth range…………………………………………………………………………………. 10m

Battery Capacity………………………………………………………………………… 7.4V, 3600mAh

Play time…………………………………………………………………………….. 4h at 50% volume

Speaker Size………………………………………………………………………………….. 3 inch*2

Speaker output…………………………………………………………………………….. 25W*2, 4Ω

Frequency Response……………………………………………………………………… 80HZ-16KHZ

Product size………………………………………………………………. 354(L)144(W)187(H)mm

PRODUCT DESCRIPTION

1. Forward/Volume Up
2. Play/Pause
3. TWS Button
4. Battery Indicator
5. Backward/Volume Down
6. Mode Button (turn among Bluetooth, USB disk, FM radio and AUX-IN)
7. Power On/Off
8. Charging Jack
9. AUX Port
10. USB Port

PARING

1. Turn the power button to “ON”, the speaker will make a tone, the Power button turn blue and blink quickly.
2. The speaker enters Bluetooth mode automatically.
3. Activate Bluetooth of mobile phone and search for device name “XTREME450” then connect it. The power button stops blinking and make a tone once connected.
4. Play the music from your mobile phone and enjoy.
5. Long-press Forward or Backward button on the device or operate on Mobile phone to select songs you like. 6 Short-press Forward or Backward button to adjust volume up and down. Or adjust the mobile phones’ volume. 7 Short-press Play/Pause button on the device or operate on Mobile phones to play/pause the music.
6. Long-press Play/Pause button to activate voice assistant SIRI/GOOGLE ASSISTANT.
7. If need to disconnect the current Bluetooth connection, long-press TWS button to disconnect.

HOW TO CHARGE

1. The charger is not included in the package. Please use a standard 5V/1-2A charger to charge this device.
2. User may also charge the speaker via a PC, put the provided charge cable into the charge slot of unit, connect the other end to the PC.
3. Charge time should be 3-5 hours. After full charging, the 4 LEDs keep lighting.
4. When battery voltage is low, the speaker will prompt for recharging.
   The unit does not have power bank function, it is forbidden to charge other device via this unit or to connect other device via a USB cable.

TWS FUNCTION

1. Turn on two identical speakers you want to pair, both under BT mode. Only need to set one of the two units.
2. Short-press the TWS button, speaker will make a tone and start to pair, a tone will be audible again and TWS button will keep lighting after paired successfully.
3. Make Bluetooth connection with your mobile phone to play music by the two paired Speakers to create more powerful surround sound effect.
4. When you want to exit the TWS mode, short-press the “TWS” button again.
5. Once two units paired with TWS, when they both are turned on next time within effective range, they will be automatically paired again (When two units TWS connected, if you manually operate to disconnect the TWS connection, next time when you turn on the two units, they will not automatically paired again).

PLAYING MUSIC FROM USB DISK

1. Turn the Power button to “ON”.
2. Insert USB flash disk into slot, the speaker will play the stored music automatically.
3. Under playing mode, long-press Forward or Backward button to select songs you like, short-press to adjust the volume up and down.
4. Short-press Play/Pause to play or pause.
   Remark: Under Bluetooth playing mode, insert USB disk will disconnect the Bluetooth and switch to play the USB disk. You can short-press the MODE button to switch to Bluetooth mode again.

FM RADIO

1. Under FM radio state, the audio cable provided treat as antenna. Please Insert the audio cable to get best FM signal before using.
2. Turn the power button to “ON”, short-press the “MODE” button to enter radio state.
3. Under radio mode, Long-press “Play/Pause” button to auto search the FM Channel and store it automatically. Short-press “Play/Pause” button to mute the speaker.
4. Long-press Forward or Backward button to change the stored FM channel, short-press to adjust the volume up and down.

AUX-IN
For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to connect from the device’s “Line Out” to the “Aux In” of this device, then Enjoy…
When using an external device, all functions can be controlled by the external device.

RGB LIGHTING
When the speaker is turned on, the RGB light is on automatically, user can long-press the Mode button to switch the RGB light on and off.

REMARKS

1. When Bluetooth connection with your mobile phone, there will be a battery icon indicating the speaker battery volume on your phone.
2. Default volume is at 50% status of max volume.
3. Under Bluetooth connection status, if there is an incoming call, user can short-press Play/Pause button to accept the call or long-press Play/Pause button to reject the call; When want to end a call, user can short-press Play/Pause button or operate on mobile phone to end the call. During the call, user can long-press Play/Pause button to switch to talking on the phone.
4. Play time may vary depending on volume level and music style.

PACKAGE CONTENTS

• 1 Portable Bluetooth Speaker
• 1 Charging cable
• 1 Audio cable
• 1 User manual

IMPORTANT
When playing music during charging, please put the volume to middle, because for some music with heavy bass, the charger may not be able to afford the high current temporarily under the maximum volume.

WARNING

• Don’t use/store this product in extreme temperatures.
• Please keep the product away from anything that generates heat, such as radiators, stoves, etc.
• In order to have hearing protection and an extended speaker life, avoid listening to songs on maximum volume.
• When cleaning the product, use a soft dry cloth. For more sever stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>