LEDWOOD Xtreme 250 BT Portable Speaker User Guide

BT Portable Speaker
USER GUIDE

SPECIFICATIONS

Bluetooth version ………………………………………………………………………………………………………. V5.1+BR+EDR Bluetooth range……………………………………………………………………………………………………………………….10m
Battery Capacity ………………………………………………………………………………………………………..3.7V, 3000mAh
Playtime………………………………………………….5h30 at 50% volume (lights off), 4h30 at 50% volume (lights on)
Speaker Size …………………………………………………………………………………………………………. 2 inch + 3 inch2
Speaker output ………………………………………………………………………………………………………………………200W
Frequency Response…………………………………………………………………………………………………….. 70HZ-18KHZ
Product size …………………………………………………………………………………………….. 356(L)134(W)*178(H)mm

PRODUCT DETAILS

1 Power On/Off / 2 TWS Button / 3 Mode Button (switch among Bluetooth, FM Radio, USB and AUX modes) 4 Play/Pause / 5 RGB light / 6 Forward/Volume Up / 7 Backward/Volume Down / 8 Battery Indicator 9 USB Port / 10 Charging Port / 11 AUX Port / 12 Reset Jack PAIRING

1. Turn the power button to “ON”, the speaker will make a tone and enter Bluetooth mode automatically.
2. Activate the Bluetooth of the mobile phone and search for the device named “XTREME250” then connect it.
3. Play the music from your mobile phone and enjoy.
4. Long-press Forward or Backward button on the device or operate on the Mobile phone to select songs you like.
5. Short-press Forward or Backward button to adjust volume up and down. Or adjust the mobile phones’ volume.
6. Short-press the Play/Pause button on the device or operate on Mobile phones to play/pause the music.
7. If need to disconnect the current Bluetooth connection, long-press the TWS button to disconnect.

HOW TO CHARGE

1. The charger is not included in the package. Please use a standard 5V/1-2A charger to charge this device.
2. Users may also charge the speaker via a PC, put the provided charge cable into the charging slot of the unit, connect the other end to the PC.
3. The charge time is about 5 hours. After full charging, the 4 LEDs are off when the speaker is off.

FUNCTION

TWS FUNCTION

1. Turn on two identical speakers you want to pair, both under BT mode. Only need to set one of the two units.
2. Short-press the TWS button, speaker will make a tone and start to pair, a tone will be audible again when paired.
3. Make Bluetooth connection with your mobile phone to play music by the two paired Speakers to create a more powerful surround sound effect.
4. When you want to exit the TWS mode, short-press the “TWS” button again.
5. Once two units are paired with TWS, when they both are turned on next time within effective range, they will be automatically paired again (When two units TWS connected, if you manually operate to disconnect the TWS connection, next time when you turn on the two units, they will not automatically be paired again).

PLAYING MUSIC FROM A USB DISK

1. Turn the Power button to “ON”.
2. Insert a USB flash disk into the slot, the speaker will play the stored music automatically.
3. Under playing mode, long-press Forward or Backward button to select songs you like, short-press to adjust the volume up and down.
4. Short-press Play/Pause to play or pause.

REMARK Under Bluetooth playing mode, insert USB disk will disconnect the Bluetooth and switch to play the USB disk. You can short-press the MODE button to switch to Bluetooth mode again.
FM RADIO

1. Turn the power button to “ON”, press the “MODE” button to FM state.
2. Short press the “Play/Pause” button to mute the speaker, long press the “Play/Pause” button to auto search the FM Channel and store it automatically.
3. Long press the Forward or Backward button to change the stored FM channel.
4.  Short press the Forward or Backward button to adjust the volume.

AUX-IN
For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to connect from the device’s “Line Out” to the “Aux-In” of this device, then enjoy… When using an external device, all functions can be controlled by the external device. Under any playing mode, when you use the audio cable to connect the device, it will auto-switch to the AUX mode.
RGB LIGHTING
The RGB light is on when the speaker is powered on, the user can short-press the RGB Light button to turn the three different light modes and turn it off.
RESET FUNCTIONALITY
If the speaker does not turn off or respond, the user can short-press the Reset jack with a small round pin to reset the speaker.
REMARKS

1. The default volume is at 50% status of max volume.
2. Playtime may vary depending on volume level and music style.

PACKAGE CONTENTS

• 1xPortable Bluetooth Speaker
• 1xCharging cable
• 1xAudio cable
• 1xUser Manual

IMPORTANT
When playing music during charging, please put the volume to the middle, because for some music with heavy bass, the charger may not be able to afford the high current temporarily under the maximum volume.
Please refer to this Users’ Manual before use to use it properly. The contents stated herein may be modified from time to time for better service as the product properties and functions are changed without prior notice. For the sound performances of the product, never use it in too cold, too hot, too dusty or humid places, especially:

1. Moist or underwater conditions
2. Near the heater or hi-temperature services or solarization
3. Places apt to fall
4. Never disassemble the combination audio; otherwise, it may invalidate the warranty.

When the earphones and the charger case are not used for long periods of time, it is recommended to keep them in a dry place and to recharge them at least every 2 months.
WARNING
Prolonged use of earphones at a high volume may cause irreparable hearing loss. We strongly advise you to adjust your Listening volume to a reasonable level. The higher the volume, the more you risk damaging your hearing quickly.
We also recommend you to use your earphones responsibly! It is dangerous or even illegal in some areas, to use earphones in situations that require your full attention, such as driving a car, motorcycle, or bicycle, but also as a pedestrian when crossing the street. etc.
If you wish to return a LEDGEWOOD product, please contact the retailer where you purchased it. Our products are guaranteed for two years by the European legal conformity guarantee. Ledgewood products are designed and produced to provide the best possible customer experience in terms of quality and associated technologies. That is why the vast majority of our products meet the demand and are beyond reproach. However, some products exhibit design flaws related to the production line, so it is our duty to inform the public about the two-year warranty available to everyone on our entire product line. If you encounter a problem with one of our products and would like to make use of this warranty, please contact your store salesperson.
In a concern of ecology and anti-waste policy, be careful not to treat the product concerned as a consumable, a second life can be offered to it

REDWOOD is a trademark owned by Primetime – Copyright 2020
All rights reserved Primetime 2020 – Imported by Primetime
Moulins de la Lys business park – Fleur de Lin Street,
Cell 7 – 59116 HOUPLINES – FRANCE Made in the PRChttp://ledwood-audio.com/en /news-notice-en/
Download the instructions in .pdf format You have trouble pairing the headphones, contact us via the mail below: sav@primetime- distribution.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>