LEDWOOD LD-M1011-TWS Bluetooth Stereo Headset User Manual

June 5, 2024
LEDWOOD

ledwood-logo

LEDWOOD LD-M1011-TWS Bluetooth Stereo Headset

LEDWOOD-LD-M1011-TWS-
Bluetooth-Stereo-Headset-product

Download the instructions in .pdf format If you have trouble pairing the headphones,
Contact us via the mail below:
sav@primetime-distribution.com

LEDWOOD-LD-M1011-TWS-Bluetooth-Stereo-Headset-fig-1

CHARACTERISTICS

True wireless stereo earphones (TWS), separate left and right channels, HI-FI sound; both
left and right earphones are bluetooth compatible and can be used separately or paired.

  • Bluetooth Version..
    • V5.0+ EDR, Super low power consumption
  • Bluetooth Mode.
    • A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6 /D11.3
  • Bluetooth Frequency.
    • 2.4GHz
  • Bluetooth Range..
    • 10m
  • Battery Capacity
    • Earphones:30mAh rechargeable lithium battery
    • Charging Case: 300mAh
  • Talk/ Play Time
    • Earphones Play lime: 3 hours
  • Standby Time
    • Both earphones can standby for b hours
  • Earphones Charging Time
    • approx. /0 minutes
  • Charging Box Charging Time.
    • apprOX. T hour
  • Charging Box Charging Voltage.
    • 5V

TIP FOR EARPHONES USING

  1. The earphones will power on and pair automatically when the case is opened.

  2. Turn on Bluetooth on your device (ex. smartphone) and select «M1011» to connect.

  3. Put the earphones back into the case in charging status, and stop charging when its fully
    charged.

  4. The left and right earphones are both able to work with Bluetooth separately.

  5. The earphones will be powered off automatically if no connection with any devices in 3 mins.

EARPHONES TOUCH FUNCTION

  • 1 touch, L/F: answer or hang up the call
  • 2 touch, L: volume down, R: volume up
  • 3 touch, L: next song, R: last song
  • Long press for 3 seconds, activate voice assistance (SIRI, OK GOOGLE.
  • Long press 5 seconds, power on/ off
  • Both earphones’ incoming call numbers are available

CHARING BOX POWER INDICATOR

Power

  • Fully Charged.
    • 4 Leds on
  • 75% Charged.
    • 3 Leds on & 1 flashing Led
  • 75-50% Charged.
    • 2 Leds on, 1 flashing Led, 1 Led off
  • 50-25% Charged.
    • 1 Led on, 1 flashing Led, 2 Leds off
  • <25% Charged.
    • 1 flashing Led & 3 Leds off

CHARGING STATUS

LEDWOOD-LD-M1011-TWS-Bluetooth-Stereo-Headset-
fig-2

POWER ON &PARING

  1. POWER ON
    Open the charging case, take out the earphones, the red & blue light is flashing alternatively.LEDWOOD-LD-M1011-TWS-Bluetooth-Stereo-Headset-
fig-3

  2. PAIRING
    When either side stops flashing, both ears paired smoothly.

HOW TO CONNECT WITH THE DEVICES

LEDWOOD-LD-M1011-TWS-Bluetooth-Stereo-
Headset-fig-4

  1. Open the charging case, Take out the earphones and They power on and paired automatically.
  2. Turn on Bluetooth on your device and select «M1011» to connect.

SUMMARYLEDWOOD-LD-M1011-TWS-Bluetooth-Stereo-Headset-
fig-5

  1. Headphone dust screen
  2. Multi-functions touch button
  3. MIC
  4. Charging port

NOTICES

  1. Do not overuse these earphones, do not subject them to high pressure, and keep them
    away from heat and humidity.

  2. Keep these earphones at a distance from the Wi-Fi signal, router or any other high-frequency transmission to avoid a loss of the Bluetooth signal.

  3. Ensure that you use these earphones within Bluetooth range (10 meters) and make sure
    that there is no obstacle between the connected devices.

  4. Use these Bluetooth earphones to connect to any device equipped with Bluetooth.

INFORMATION AND PRECAUTIONS FOR LISTENING WITH EARPHONES OR AN AUDIO
HEADSET
Exposure to sound levels must be of limited duration to avoid damage to hearing.
The duration of exposure to a sound level of 80dB (A) must be limited to forty hours per week,
and exposure to a sound level of 89dB (A) must be limited to five hours a week.
Take regular breaks.

  • Listening at an excessively high sound level can damage the listener’s ear, including the risk of hearing loss.

Risk of permanent loss of hearing or tinnitus.
Limit the sound level: to avoid any damage to hearing, limit the sound level by setting the volume of the device in a secure way with clear and moderate sound output.

PRECAUTIONS AND SAFETY RULES FOR LITHIUM BATTERIES
Always charge the charger unit on a fireproof surface. Do not charge on a flammable surface SUch as carpet, wood flooring or other. Charge your unit on a heat-resistant, non-conducting surface in order to prevent damage from short-circuiting or charging problems.
Do not charge near liquid or solid flammable materials, wood furniture, etc.

LEDWOOD is a trademark owned by Primetime
Copyright 2020
All rights reserved Primetime 2020
Imported and distributed by Primetime
Moulins de la Lys business park
Fleur de Lin Street, Cell 7
59116 H0UPLINES – FRANCE
Made in the PRC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals