FELLOSTAR B0BGH394N1 Car Play Box Instruction Manual

FELLOSTAR B0BGH394N1 Car Play Box

INSTRUCTION MANUAL

Please read this instruction manual carefully

Please take good care of this instruction manual

Introduction

Welcome to choose our CarplayBOX! In order for you to use this machine correctly, please read the manual of this machine carefully before using it. We are dedicated to provide you with better products and services!

Product list

1. Product description

2. CarplayBOX connection

Reminder: This system only supports the original car models with wired Carplay!
nsert the USB cable at the USS interface of the car, and insert the other end of the USB cable at the bottom of the CarplayBOX. At this time, the indicator light is flashing, and the connection will be successful within 1 minute! (the indicator light is always on)The first connection needs tobe adapted to the car central controldevice and resolution. CarplayBOX will restart automatically, which is a normal phenomenon.

3. Wifi connectivity

Go to your machine settings-open a wifl connection-find the wifi you want to connect to and enter your password for the connection

4. SD card media playback

Insert SD card can play music, pictures, video

5.Wireless Carp lay connection (box to cell phone)

1. Connect to the iPhone’s Bluetooth connection, and the success of the Bluetooth connection will pop up the notification window, click on “Use Carplay” (the Bluetooth connection will automatically disconnect after success, the phone wifi will automatically keep connected to the car’s central control device hot)

Note : If you want to use the original car screen Bluetooth, you need to disconnect the wireless Carplay first

6.Wireless Auto Connection (box to cell phone)

Connect the Bluetooth of Android mobile phone, use wireless AUTO after successful connection

Wireless AUTO successfully connects to the interface

7. System Upgrade

Place the update package (update.zip) in the SD Kaghan Directory, insert it into the card slot, and pop up the update confirmation box (make sure you check the box to clear the upgrade option). Click OK and the product will be upgraded automatically. The upgrade will restart after it is successful

8. Common trouble shooting

1. The car cannot be connected after starting: please re-plug and unplug the box to connect again.
2. There are abnormal phenomena such as crash: please press the reset button RESET.
3. The wireless Carplay cannot be connected: Please check whether the Bluetooth of the mobile phone is turned on.
4. The SD card is not recognized: Please check whether the SD card is damaged, please re-insert the card or format or replace it with a new card.
5. 4G network cannot be used: Please check whether the SIM card still has data.

6. The box cannot be connected: Please clear the connection record of the central control device of the car.

Specifications:

• Compliance: Part 15 of FCC Rules
• Radiation Exposure Limits: FCC approved for uncontrolled environment
• Minimum Distance: 20cm between radiator and body

Product Usage Instructions

Installation:

1. Place the device on a stable surface.
2. Ensure there is a minimum distance of 20cm between the radiator of the device and your body.

Operation:

1. Turn on the device using the power button.
2. Follow the specific instructions for the intended use of the device.

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuan t to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterferenc e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or reloca te the receiving antenna.
• Increase the separation between the equi pment and receiver.
• Connect the equipment into an outlet on a circuit different f rom that to which the receiver is c onnected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Frequently Asked Questions (FAQ)

Q: Can I modify the device?

A: Any changes or modifications not approved by the manufacturer may void your authority to operate the equipment.

Q: What are the FCC compliance conditions for this device?

A: The device must not cause harmful interference and must accept any received interference, including that which may cause undesired operation.

Q: How far should the device be from my body during operation?

A: The device should be operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>