TIE Wireless Bluetooth Headphones User Manual

June 8, 2024
TE

TIE Wireless Bluetooth Headphones User Manual

TE Wireless Bluetooth Headphones User Manual

Product Overview

TE Wireless Bluetooth Headphones - Product Overview

Turning On | Off

Turning on : Press and hold MFB for 4 seconds until blue LED flashes
Turning off : Press and hold MFB button about 4 seconds until red LED flashes

Connecting

  1. Keep your Bluetooth device within 1 meter when pairing;
  2. Make TIE enter pairing mode as shown: Ensure TIE is off. Press and hold Multi-Function Button for approximately 8 seconds until red and blue LED flash rapidly;
  3. Using your Bluetooth device, please scan/search for available Bluetooth devices select “TIE” from the list of devices shown;
  4. If prompted, enter password or PIN No: “0000”
  5. If prompted by your mobile phone to connect, select “Yes”(this will vary among mobile phone models)
  6. After successful connecting, blue LED of headset will flash twice every 4 seconds

Multi-pairing

TIE can connect with two Bluetooth cell phones at the same time. The general pairing procedures are as follows:

  1. Pairing TIE with device A
  2. Turn on TIE and make it enter pairing mode again, and pairing it with device B
  3. Operate device A to connect with headset. TIE has already connected with two devices in this moment

Hands Free

TIE built-in microphone allows you to answer and end calls. Please use the chart below to execute your desired function.

TE Wireless Bluetooth Headphones - Hands Free 1

While you‘re listening to your music, you can control your Bluetooth device with the below action on your TIE ear phones.

TE Wireless Bluetooth Headphones - Hands Free 2

Specifications

Model: All Round
Bluetooth version: CSR8635|V4.1+EDR
Bluetooth profiles: Headset, Hands free, A2DP, AVRCP
Operating distance: 10M
Talk time: 4-6 hours
Standby time: 150 hours
Charging time: about 1.5 hours
Charing Port: Micro USB

Charging

TIE comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time.

  1. Plug another side of cable to the USB port of PC or into a USB power charger
    • Red light on: Charging
    • Red light off: Finish charging
  2. It will take about 1.5 hours to finish charging

TE Wireless Bluetooth Headphones User Manual – Optimized File
TE Wireless Bluetooth Headphones User Manual – Original File

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

TE User Manuals

Related Manuals