TE 2381957-1 Hand Crimping Tools Instruction Manual
- June 1, 2024
- TE
Table of Contents
TE 2381957-1 Hand Crimping Tools
Product Information
Specifications
- Tool Grade: Commercial Crimp Tooling
- Ratchet Configuration: Operator Releasable & Adjustable
- Die Sets Type: Removable/Interchangeable
- Specification Type: TE Product Specification (114-)
- TE Certification: Cannot be Certified
Features
- Power Technology Type
- Tooling Type
Product Compliance
Meets the following directives:
- EU RoHS Directive 2011/65/EU
- EU ELV Directive 2000/53/EC
- China RoHS 2 Directive MIIT Order No 32, 2016
- EU REACH Regulation (EC) No. 1907/2006
Halogen Content
Low Halogen content – Br, Cl, F, I < 900 ppm per homogenous material. Also
BFR/CFR/PVC Free.
Solder Process Capability
Not applicable for solder process capability.
Compatible Parts
- TE Part # 2362810-1 SDE CRIMP HAND TOOL FRAME W /O DIES
- TE Part # 2381957-2 SDE F MCON 1.2 0.35-24 DIE SET
Documents
- Datasheets & Catalog Pages
- Bottoming Dies
- Instruction Sheet (U.S.)
Product Usage Instructions
-
Step 1: Preparation
Ensure the tool is clean and free from debris. -
Step 2: Die Set Installation
Choose the appropriate die set for your crimping needs and securely install it in the tool. -
Step 3: Crimping Process
Place the connector and wire into the die set, then squeeze the handles together to crimp them securely. -
Step 4: Inspection
After crimping, visually inspect the crimped connection to ensure it is properly secured.
Frequently Asked Questions (FAQ)
-
Q: Is this tool suitable for heavy-duty crimping tasks?
A: Yes, the tool is designed for commercial crimp tooling, making it suitable for heavy-duty tasks. -
Q: Can the die sets be easily replaced?
A: Yes, the die sets are removable and interchangeable for versatile use.
TE Internal #: 2381957-1
Hand Crimping Tools, Commercial Crimp Tooling, Operator Releasable &
Adjustable, Removable/Interchangeable, TE Product Specification (114-), Manual
View on TE.com >
Application Tooling > Hand Crimping Tools
- Tool Grade: Commercial Crimp Tooling
- Ratchet Configuration: Operator Releasable & Adjustable Die Sets Type: Removable/Interchangeable Specification Type: TE Product Specification (114-)
- TE Certification: Cannot be Certified
Features
Other
- Tool Grade Commercial Crimp Tooling
- Ratchet Configuration Operator Releasable & Adjustable
- Die Sets Type Removable/Interchangeable
- Specification Type TE Product Specification (114-)
- TE Certification Cannot be Certified
- Power Technology Type Manual
- Tooling Type SDE Crimp Hand Tool
Product Compliance
For compliance documentation, visit the product page on TE.com>
- EU RoHS Directive 2011/65/EU Out of Scope
- EU ELV Directive 2000/53/EC Out of Scope
- China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold
- EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JAN 2023 (233)
- Candidate List Declared Against: JAN 2021 (211)
- Does not contain REACH SVHC
- Halogen Content Low Halogen – Br, Cl, F, I < 900 ppm per homogenous material. Also BFR/CFR/PVC Free
Hand Crimping Tools, Commercial Crimp Tooling, Operator Releasable & Adjustable, Removable/Interchangeable, TE Product Specification (114-), Manual
Solder Process Capability
Not applicable for solder process capability
Product Compliance Disclaimer
This information is provided based on reasonable inquiry of our suppliers and
represents our current actual knowledge based on the information they
provided. This information is subject to change. The part numbers that TE has
identified as EU RoHS compliant have a maximum concentration of 0.1% by weight
in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE,
DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to
these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2).
Finished electrical and electronic equipment products will be CE marked as
required by Directive 2011/65/EU. Components may not be CE marked.
Additionally, the part numbers that TE has identified as EU ELV compliant have
a maximum concentration of 0.1% by weight in homogenous materials for lead,
hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an
exemption to these limits as defined in the Annexes of Directive 2000/53/EC
(ELV). Regarding the REACH Regulation, the information TE provides on SVHC in
articles for this part number is based on the latest European Chemicals Agency
(ECHA) ‘Guidance on requirements for substances in articles’ posted at this
URL: https://echa.europa.eu/guidance-documents/guidance-onreach
Compatible Parts
Documents
- Datasheets & Catalog Pages
- Bottoming Dies
- English
- Instruction Sheets
- Instruction Sheet (U.S.)
- English
For support call +1 800 522 6752