ROCAM CR1001F Projection Digital Alarm Clock Instruction Manual
- June 3, 2024
- ROCAM
Table of Contents
ROCAM CR1001F Projection Digital Alarm Clock
LOCATION OF CONTROLS
- SET TIME
- HOUR
- MINUTE
- DIMMER/DST
- SNOOZE/OK
- ALARAM 1/ ALARAM OFF
- ALARAM 2/ ALARAM OFF
- OFF IN/ PAUSE
- PROJECTION ON/FLIP/OFF
- VOLUME –
- VOLUME +
- DST INDICATOR
- ALARAM 1 INDICATOR
- ALARAM 2 INDICATOR
- FOCUS RING
- BATTERY DOOR
- USB PORT
- DC JACK
- SPEAKER
- HOELDER (X2pcs)
POWERING ON
- Install 2pcs 1.5V “AAA” size batteries to the proper terminals in the battery compartment to memorize the time setting in case of power outage.
NOTE: Batteries (not included) don’t support time display but can trigger an alarm in case of AC power failure
- Connect the adapter line to DC jack. Then plug into a 100~240V AC wall power outlet.
TIME SETTING
- Press SET TIME button once, display 12:00 starts flashing
- Press HOUR button to set the hour press MN button to set the minute.
- Press SET TIME or OK SNOOZE button to save time or wait for another 5 seconds to confirm automatically to change 12H/24H time format
- Hold press SET TIME to change 12H/24H time format
ALARM SETTING
- Press ALARM 1 button, the alarm indicator will light up, the display 6:00 starts flickering.
- Press HOUR button to set the hour, press MIN button to set the minute.
- Press ALARM 1 button or (OK SNOOZE) button to save alarm time or just wait for another 5 seconds to confirm automatically.
- Push VOL+ or VOL- button to adjust alarm volume.
Turn off Alarm
When alarm goes off
- Press OK SNOOZE button to temporarily turn off alarm for 9 minutes. Alarm will ring every next 9 minutes.
- Press ALARM ON/PAUSE button to turn off alarm for 24 hours. The alarm indicator 1 is still on, which means alarm is still activated and will ring after 24 hours.
- Cancel Alarm
Hold press ALARM 1 button until the alarm indicator will disappear from the display.
Setting ALARM 2 is the same as ALARM 1.
DIMMER & DST
- Repeat DIMMER DST button to adjust the brightness of display for your
- Hold press DIMMER DST button to switch DST
USB CHARGING
- Plug charging cable into device such as phone or tablet.
- Device can charge both your phone and tablet at the same time.
- The maximum charge current is 1 Ampere.
PROJECTION MODE
- Press Projection mode PROJECTION ON/FLIG/OFF button to turn on projection.
- Press PROJECTION ON/FLIG/OFF button once again to flip the projection time reversely.
- Press PROJECTION ON/FLIG/OFF once again to turn off projection.
Note
- Best projection distance is between 1.5 to 3.0 meters.
- Projector is a common LED light. So the projector is not visible in bright environment.
- Rotate focus ring to adjust clarity of projection image
Note: If projection numbers are fuzzy, please rotate the focus ring (17) to adjust proper angle for clear projection image
WARRANTY
ROCAM Electronics Co, Ltd warrants the ROCAM branded alarm clock and accessories contained in the original packaging against defects in materials and workmanship when used normally in accordance with ROCAMs published guidelines for a period of 1 year and replacement service within 3 months from the date of original retail purchase by the end-user purchaser (“Warranty Period”). Moreover, 1-month refund policy is available for the original consumer or recipient.
The original consumer or recipient can sign up on our website for a 18 months extended warranty.
- If you need any help for this product, please feel free to contact us by
Email:[email protected]
Remarks
- This warranty does not include: damage to product or components resulting from abuse, accident, or climatic/environmental conditions; damage resulting from normal wear or tear, misuse, or unauthorized repair; changes in surface finishes due to aging or exposure to light. The company’s obligation under this warranty shall be limited to repairing the product or component, or at its option, replacing it with a new product or components.
- Our company reserves the right to revise the warranty polices without notification. Please check our website to obtain the latest updates.
Frequently Asked Questions
Do projection alarm clocks project all the time?****
Yes, there will be a 16-hour projection on the ceiling.
To turn it back on after that, you must press the button.
When you retire to bed, it’s simplest to simply press the button, giving you
access to 16 hours of beautiful ceiling projection time.
How do projection alarms work?****
An analogue or digital clock with a projector attached projects a larger version of the clock face or display onto any surface that can serve as a projection screen, most frequently the ceiling.
How do you turn off the alarm on a projection clock?****
TIME ALARM ACTIVATE/DEACTIVATE
To view the alarm time, press the ALARM button once.
To sound the alarm, press the ALARM button once more.
There is a bell icon.
To silence the alarm, press the ALARM button one again.
How do I turn off the alarm on my discovery alarm?****
When the alarm goes off, press to silence it.
To see the time of an alarm, press.
Sound: Press the button once to turn on the sound; press it again to turn it
off.
What is the point of a projection alarm clock?****
The clever design of the projection alarm clock allows you to view the projected time on your wall or ceiling as well as on the clock’s face, which makes it easy to read the time.
How do you turn the volume up on a sharp alarm clock?****
Press the SOUND button to start the SLEEP SOUNDS.
Rotate the DIAL on the unit’s top to change the volume.
Press and hold the SOUND button for 2 seconds to turn off the SLEEP SOUNDS.
How do you turn the brightness down on a sharp alarm clock?****
Press the SNOOZE/DIMMER button to adjust the HIGH or LOW setting to regulate the brightness of the clock display while the alarm isn’t going off.
How long do digital alarm clocks last?****
The standard alarm time on an Android is 10 minutes.
Unlike the iPhone, an Android alarm’s ring time can be adjusted.
The “silences after” parameter is adjustable in the alarm’s settings tab.
Can projectors work on ceiling?****
An advantage of using a ceiling mount over a shelf at the back of the room is
that you can position your projector much closer to the screen.
You will benefit from the unit’s maximum brightness if you do this.
Pro: Because ceiling mounts keep the projector out of the way, many users
choose them.
How is a projector clock fixed?****
Please reset the clock by following these procedures if the methods above
don’t seem to be helping:
Remove the clock’s plug from the outlet.
Take off the backup battery from the clock’s bottom.
60 seconds should pass.
Put the battery back in and re-plug the clock into the outlet.
How is the alarm on children’s discovery watch disabled?****
Toggle the Alarm icon on and off in Normal Time Mode by holding down the RESET button while hitting the START button.
Why are digital clocks superior?****
Analog clocks are less feature-rich than digital ones. Countdown timers, Wi-Fi compatibility, and the capacity to synchronise all clocks on a system are some of these features.