Headphones KH113M Mono Bluetooth Headset User Manual

Headphones KH113M Mono Bluetooth Headset

Product Overview

Packing list

• A. Bluetooth Headset KH113M x 1
• B. Type-C USB charge cable x 1
• C. User manual x 1

Basic Function

MFB

| ****

Power On

| In off status, press and hold the MFB for 5-6 seconds to power on

Power Off

| 1.  In on status, press and hold the MFB for 3 seconds to shut down.

2.  After the headphone is put into the recharge stand, it will automatically shut down ( When the recharge stand is connected to the charger)

Enter Pairing Mode

| 1.  In off state, press and hold the MFB for 5-6 seconds to enter the pairing mode

2.  In standby state, double-click the MFB button to enter the pairing mode.

Voice assistant| In standby state, press and hold the MFB for 1-2 seconds then release ( Your phone needs to support this feature)
Audio Switch| During a call, press and hold the MFB for 1-2 seconds to switch between Bluetooth headset and your mobile phone

Play / Pause

| ****

Single click the MFB to play/pause music

Answer a call| When a call incoming, single click the MFB
Hang up a call| When during a call, single click the MFB to hang up
Reject a call| When a call comes in, press and hold the MFB for 2 seconds to reject the call

Volume +

| ****

Next Song

| ****

Press and hold the volume + button for 1-2 seconds

| Volume Up| Single click the volume + button
---|---|---

Volume –

| Previous Song| Press and hold the volume – button for 1-2 seconds
Volume Down| Single click the volume – button
Microphone Mute Button| Microphone Mute| During a call, click the mute button to mute the call, and click again to unmute.

Bluetooth Pairing and Connection

A. In the off state, press and hold MFB for 5-6 seconds to power on and enter pairing status, the LED flashes white and red alternately.
B. Search and click to connect ”KH113M” on your phone Bluetooth lists, after connected you can play music from phone to headphone.

1. In the off state, press and hold MFB for 5-6 seconds to power on and enter pairing status, the LED flashes white and red alternately.
2. Search and click to connect ”KH113M” on your phone Bluetooth lists, after connected you can play music from phone to headphone.

Connection with Two devices

• A. In the off state, press and hold MFB for 5-6 seconds to power on and enter pairing status. Turn on the bluetooth of the first device, search KH113M and click to connect.
• B. After the connection is successful, double-click the MFB of KH113M to enter pairing status (the first mobile phone that has been connected successfully will not be affected and can work normally), the LED flashes white and red alternately.
• C. Turn on the Bluetooth on the second device, search KH113M and click to connect.

Music only can be played from one phone under two connections, when you want to play music from another phone, you need to pause or close the music of the previous phone. The same operation during talking status.

Connection with Dongle

1. After the USB interface is inserted into the computer equipment for power supply, it will turn on and enter the pairing status automatically. The blue light will be on for 1-2 seconds, and then the blue light will flicker.
2. Press and hold MFB for 2-3 seconds to power on the Bluetooth headset and enter pairing status, the white LED flashes slowly.
3.  Please put the Bluetooth headset close to the dongle. After connected, the LED of the dongle will be solid blue. Now you can listen to music or answer the call through

Bluetooth headset. (The dongle can only be paired with KH113M Bluetooth. The Bluetooth connection will be locked after the first paired, and other headphones cannot be paired, including other KH113M headphones. )

LED Indicator with KH113M

time
Connected mode| White LED flashes once per 5 seconds
Charging| Solid White LED
Full charged| White LED is off
Reconnect| White LED flashes slowly (once per second)
Low battery| Red LED flashes 3 times per 3 minutes

LED Indicator with Dongle

Charging

Please charge KH113M at once when the Red LED flashes(Red LED flashes 3 times per 3 minutes). Charging time is about 1.5 hours. Solid White LED when charging, and White LED turns off when full charged.

Charge Connections

Please connect to the KH113M charging port through the Type-C end of Type-C charging cable.

Note
Please charge KH113M at least once every 2 months when don’t use it.

Product Specification

The above data are all from SKY WING laboratory, and the actual use time, environment and music will be different.

Attention and Q & A

How to reconnect and operation when failed to reconnect？

• When KH113M connects with your mobile phone successfully at the first time, it will search and reconnect the paired device automatically when power on. If failed,
• please pair it manually: Press and hold MFB for 5-6 seconds to power on and enter pairing status. Turn on the Bluetooth of the mobile phone, search KH113M and click to connect.

How to delete paired records？

In a power-on state, press and hold the MFB and the volume- at the same time for 5 seconds to clear the pairing record. (the dongle cannot be deleted)

What’s the password for pairing?

Some connection devices require password for pairing, please try 0000 or 8888 or 1111 or 1234.

What devices could charge for the headphone？

Any car charger, power bank, PC etc. which meets DC 5V, charging current more than 1000ma could be charged for KH113M.

How to do if have connected issue or dead？

Please try charging reset: plug in the charging cable to charge, this will reset the headset to power off, and it can be used normally after power on. If you still cannot use it normally, please contact customer service or the manufacturer for technical support. Support email: support@mopchnic.com

Power off automatically？

KH113M will power off if does not connect any devices for over 10 minutes, or battery voltage is less than 3.1V.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>