R18 Wireless Binaural Stereo Sound Music Headphones Instruction Manual

R18 Wireless Binaural Stereo Sound Music Headphones
Instruction Manual

Parameter Configuration

True wireless connection (R18 ) to achieve stereo sound, left and right channel separation, HIFI sound.Both left and right ears have full Bluetooth function, which can be used alone or in pairs.

customized rechargeable polymer lithium batteries, and the charging case battery capacity is 200mAh
Apply| Suitable for playback devices with Bluetooth function
Call/play time| One-ear play/talk time: about 5-6 hours
Two-ear play/talk time: about 5-6 hours
(support to telegraph number IOS system power display)
Packing list| Earphone 2, charging compartment 1, manual 1, data cable 1
listening time| About 5-6 hours
Standby time| About 230 hours
Charge time| (1)Charging time (earphone): about 1 hour
(2)Charging time (charging box): about 1 hour
(3)Charging times (charging box): about 3 times

Use charge

• Charge the earphone: Put the earphone into the charging compartment, close the cover, and the red light will turn on in the charging compartment It automatically enters the charging state.
• Charge the charging compartment: When charging, the red indicator light of the charging compartment flashes, and the charging is completed The red indicator light keeps on.

Check the battery

• Headphone power: After the headphone is connected to the mobile phone, you can check the headphone power in the status bar of the mobile phone.
  Note: The status bar of mobile phone only shows the power of two earphones, and some phones may not support it.

• Charging bin power: Put the earphone into the charging bin when the cover is closed
  1. The red indicator light in the charging bay is on for about 10 seconds, indicating sufficient power;
  2. The red indicator of the charging compartment blinks or does not turn red, and the green indicator is displayed when the cover is opened. It indicates that the power is low and needs to be charged in time.

The connection

• Connecting a new device ® Turn on the earphone and wait for the earphone to connect.
  Turn on the device Bluetooth, search for and connect the headset Bluetooth name R18.

• Connection interruption
  When the device turns off the Bluetooth or exceeds the headset connection range, the headset automatically enters the state of waiting for connection. If the headset is not connected to any device within 5 minutes, the headset automatically shuts down.

• Automatic connection back
  Open the charging case, the headset in the charging bay (or take out and put in the charging bay), will automatically connect back to the most recently connected Bluetooth device.
  Tip: If the headset cannot be automatically connected back to the device, manually connect the headset to the device on the Bluetooth interface

Charging bay function

1. Open the cover and take out the headset.
2. The intelligent detection of the earphone in the warehouse starts 5V and enters the charging state.
3. Headphones put into the warehouse digital tube automatic horse, full power off.
4. Charging current of charging case: 200 ma.

TWS (Jerry 6983 solution) Bluetooth version V5.3; Pairing name: R18

• Call between two parties;
• Music distance: 10-15 meters;
• Communication distance:10-15 meters;

Basic Functions of earphone

1. Lift the machine and start it automatically;
2. Automatic shutdown after charging;
3. Fix the left side (L/R to fix the Left and right);
4. Raise the boot quickly pair R18 , automatically connect the phone back;
5. The phone automatically shuts down after 3 minutes without Bluetooth connection;

Indicator light

1. When charging, the headphone indicator is steady on, and when fully charged, the indicator is off;
2. Turn on: The indicator blinks.
3. Power off: The indicator is on for 2 seconds.
4. Wait for pairing, red and blue lights flash.
5. The left and right earphones are paired successfully. The primary ear flashes red and blue alternately, and the secondary ear is off.
6. The phone is successfully connected and the indicator is off.
7. Press the smart touch mode to switch on and off the

Function key

1. Click Pause, answer the call, or hang up the call.
2. Press for 1 second: rejects the call.
3. Double click: the next song;
4. Three strikes: volume increase and decrease;
5. Hold down for 1.5 seconds to access SiRi;
6. Press 4 on startup to switch between English and Chinese

Preventive measure

1. Earphones should be stored in a dry and ventilated environment, avoid oil, water, moisture and Dust affects product performance.
2. Avoid using harsh, organic solvents or materials containing these ingredients to clean headphones.
3. The earphones should be used correctly according to the regulations, and pay attention to the influence of the use environment on the earphones Ring your headphones. To ensure a smooth connection, it is recommended that the distance between the headset and the phone is between Within 10 meters.
4. If the earphone cannot be connected or is improperly connected, please do not disassemble the earphone or accessories by yourself, otherwise, no guarantee is made
5. About charging headphones. Please use our standard USB cable or designated charging cable to charge the battery.
6. In order to ensure normal use, please ensure sufficient power supply for the earphone.
7. Please use 5V1A charger.

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential  installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no  guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged  to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference  that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>