Headphones TB2002 Wireless Headphone User Manual

Headphones TB2002 Wireless Headphone

FUNCTION

Red and blue indicator light start flash alternately

Bluetooth Mode /TF  Card Mode|

Blue indicator light flashes slowly

Standby Mode| Blue indicator light is on
Message State| Blue indicator light flashes quickly
Lower Power State| Red indicator light flashes slowly
Charging State| Red indicator light is on when it starts to charge, it goes out after fully charged

Basic Keys Operation

Power On

Hold Press the 3  seconds, listen for the POWER ON message.

Power Off

Hold Press the  3 seconds, listen for the POWER OFF message.

Button Instructions

Switch between Modes

Headphones will switch to SD card mode automatically after inserting the SD card.

While SD card is inserted you can press M to toggle between BT mode and SD card mode.

Volume Control

Short press adjust the volume of headphone.

Track Select
Hold press change to the next track or back to the previous track.

Play /Pause/ Answering/Ending a C all

• Short press pause the music
• Short press play the music
• Short press answer a call
• Short press end a call
• Hold press the reject a call

MODE DESCRIPTION

Charging Mode

New Headphones are charged for several uses straight out of the box. When the battery is low, please use the USB charge cable to charge the headphones. Full charge takes approximately 2 hours. The headphones will power off automatically when charging. Red light indicates the headphones are charging and the red light indicator will go out once the headphones are fully charged.

Power on Mode

Long press the power button for 3 seconds, the headphones will turn to BT mode automatically without an SD card inserted. The BT will connect automatically with previously paired devices within range. If no previously paired devices are in range it will automatically enter pairing mode.

Switch between Modes

When the SD card is inserted, short pressing the M button will switch between BT mode and SD card mode.
When the SD card is NOT inserted, short pressing the M button will disconnect BT and enter into BT pairing mode.

EQ Switch

The headphones have been program with 2 equalizers which will suit different music/ audio styles.
To switch the EQ press and hold the M button until you hear the tone.
The tone indicates the EQ has switched. Repeat the process to switch back. Different music will sound better/ louder/ bassier in a particular EQ program.

Connect Two Mobile Phones at the Same Time
The headphone can be paired with two different mobile phones at the same time
1 In power off state, hold press on-off button 3 seconds until the headphone is in pairing status. pair the first mobile phone.
2 Turn off the BT signal function of the first mobile phone then pair to the second phone.
3 Open the BT signal function of the first mobile phone to pair the headphone.

SPECIFICATION

Packing Accessories

1. Headphone
2. Charging Cable
3. User Manual

Battery Life:

1. Please use USB power of SVl A to charge. It may damaged the headset using charging equipment with high voltage.
2. When the headset has not been used for more than 3 months, please fully charge the headset before use.
3. It is recommended to charge the headset every 3 months to protect the battery life.

Precautions

Please don’t leave headphones exposed to intense sunlight or in high temperature environment.
Please don’t submerge headphones in liquid, try to keep dry and wipe away sweat after use.
Please use specific USB charge cable provided.
Please don’t disassemble headphones.
Please don’t subject device to excessive force or impact.
If there is noticeable damage such as depression, puncture, tearing, deformation, corrosion etc please stop using the device immediately and contact our customer service.
If there is an abnormal smell, abnormally high device temperature, changes to colour or shape, please stop using the device immediately and contact our customer service.
customercontact@runarbrand.com

Warning

There is a danger of explosion if the battery is replaced in an improper way. It can only be replaced with a battery of the same type of equivalent.
The battery must not be exposed to sunlight, fire or an overly heated environment.
The device should not be submerged in water or worn in the shower. The device is NOT a children’s toy. Children under the age of 12 need to be accompanied by an adults when using this device.
Using the headset at high volume for long periods of time may cause damaged to your hearing.

REGULATORY COMPLIANCE

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party.
Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1.  This device does not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

RF warning statement:

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Questions,
feedback,
product assistance?
customercontact@runarbrand.com
we will help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>