Headphones B20 IPX8 Waterproof Bone-Conduction User Manual
- June 7, 2024
- Headphones
Table of Contents
B20 IPX8 Bone Conduction Headphone User Manual
Understand the headphone
How to wear
Waterproof
IPX8 waterproof (swimming, sweating, rain, washing face, showering, having
a bath, etc)
★ Please note that the phone ’ s Bluetooth signal can not be transmitted underwater.
Unterwasser
Charging and transmit music files
- Headphones comes with unique charging base
- Bring the charging base and charging contacts together as follows to charge or transmit files
- Always ensure the charging contacts and the charging base are clean to avoid bad contact
- The headset is connected to the computer through the data cable
- Open the external drive disk
- Drag the music file to the external drive
- Note: Support MP3 format
Wireless Headset controls
-
On/Off: Press the “MFB ” for about 3 seconds
-
Pairing:
-
While the device is turned off, press and hold the Power Button for 3 seconds, at which point the Led Indicator will begin flashing in alternating red/blue and voice promotion “waiting for connection ”
-
On the electronic device that you ’re pairing your headphones with, locate the Bluetooth menu and select the headphones
-
Headphones will be connected within seconds and voice will prompt with the word “Device connected ”.
-
Mode switching between Wireless Mode/MP3 Mode: Press the “ + ” and “ – ’ ’at the same time.
-
Adjust volume:Click Volume “ + ” / Volume
-
Move back to previous song: Press and hold “-’’Skip to next song: Press and hold “+”
-
Pause/play music: Click the “MFB” once. The headphones will beep, and your music will pause/play
-
Answer a call: Click the MFB once
-
Reject a call: Press and hold the MFB
-
How to control MP3 play: Click the to the single track, single play or Loop Playback
Specifications
Wireless version: Wireless 4.2
Support profile: A2DP vl.3,AVRCP vl.5,HFP vl.6,HSP v1.2
Working frequency: 20HZ -20KHZ
Speaker Diameter: 16 mm
Speaker Impedance: 8 ohm
Speaker Power: 7mW
Battery: Polymer lithium battery, 200mAH
Music playback time: 4-5 hours
Talk time: 4-5 hours
Standby time: 120 hours
Charging time: 1.5 hours
Charging port: Charging contacts & charging base
Wireless transmission distance: 33 feet (free space)
Microphone: Built-in microphone
Microphone sensitivity: -38 dB
Headphone type: Bone conduction
Power display: IOS device
Main material: PC/ABS
Weight: 1.6 OZ
Dimensions: 4.483.241.41 inch
Built-in Memory: 8GB
Waterproof rating: IPX8
Tips for using this headphones for swimming
- Wear the headphones at the right position before you wear your swimming cap, so that the swimming cap will help to position the headphones
- Turn your headphone to MP3 mode for better music experience when swimming
Cautions
- In addition to water, sweat, and other liquids, seawater is likely to damage the headset. Please avoid using this headset when swimming in the river or sea.
- When swimming, this headphone could not connect to your smartphone, please turn it to MP3 mode.
- Please mind the volume, do not turn it too loud in case it would hurt your
Package list
Bone conduction headphones 1
Charging Dock 1
User Manual* 1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>