PAXCESS TWINS Portable Bluetooth 2 In 1 Stereo Speaker User Manual

TWINS
PORTABLE BLUETOOTH 2 IN 1 STEREO SPEAKER

Button Functions

DEVICE: TWINS

POWER/MULTIFUNCTION BUTTON

• Long press the power button on both top and bottom speakers for 2 seconds to power ON/OFF
• Short press either power button to play/pause music
• Short press either power button twice to disconnect Bluetooth
• Short press either power button three times to disconnect the Pairing between the top and bottom speaker

FOR PHONECALLS

• Short press the top speaker’s power button to answer/end an incoming call
• Short press the top speaker’s power button twice to reject a call

UP & DOWN BUTTON

• Short press the up button to turn the volume up
• Short press the down button to turn the volume down
• Short press the up and down button simultaneously to turn ON/OFF flashing white LED during music playing
• Long press the up button to go to the next track
• Long press the down button to go back to the previous track

Note: Both speakers can be controlled mutually after paired. If the top and bottom speakers are not connected to each other, turn off the bluetooth on your device and then long press the up and down button simultaneously on both speakers for 3 seconds to connect quickly.

Instructions: Getting Started

STEP 1
Long press the power/multi-function button on both top and bottom speakers simultaneously for 2 seconds to power on.
STEP 2
Find “PAXCESS TWINS” in your device’s bluetooth list and select it.
STEP 3
The LED indicators on both speakers will stay white once the bluetooth is paired. You will hear a beep to indicate successful pairing. You can now play music.

Instructions: How to Charge

STEP 1
Lift the micro USB charging port cover on both the top and bottom speaker.
STEP 2
Use the provided USB Y-cable. Plug the two smaller mirco USB connectors into both charging ports.
STEP 3
Plug the other end of the USB Y-cable into a power adaptor (not provided) or a USB charging port.
STEP 4
While the speakers are charging, the LED indicators will stay red.
Once charging is complete, the LED indicator will power off.

Instructions: How to Split & Reconnect

STEP 1
Place one hand on the top speaker and your other hand on the bottom speaker
STEP 2
Simultaneously twist the top speaker counter clockwise and the bottom speaker clockwise
STEP 3
Separate the speakers
STEP 1
Place one hand on the top speaker and your other hand on the bottom speaker
STEP 2
Align both the top and bottom speakers
STEP 3
Simultaneously twist the top speaker clockwise and the bottom speaker counter clockwise

INTERFACE INSTRUCTIONS

The speaker will power off automatically if bluetooth is unconnected for more than 10 minutes.

TECH SPECS

PRODUCT NAME Portable bluetooth 2 in 1 stereo speaker

MODEL NAME| Twins
BLUETOOTH VERSION| 5.0
BATTERY CAPACITY| 1500mAh x 2
PLAY TIME| 14 Hours ( Depends on the music and volume )
CHARGING TIME| 2-4 Hours
DRIVER UNITS| 10W x 2
CHARGING CURRENT| 5V 0.8A
PRODUCT SIZE| 206.5’78.5.78mm
PRODUCT WEIGHT| 860g
INCLUDES
lx Twins:2 Bluetooth Stereo Speaker System
lx Manual
lx Clip
lx USB Charging Cable

FAQ

Q: What kind of charger should we use for the speaker?****

– A: Use the provided USB Y-cable.
– If unavailable, use any micro USB charger above 5V/0.8A

Q: What if there is discontinuous sound when playing?****

– A: The speaker can be normally used within 10 meter.
– If it is over 10 meters, there might be noise or discontinuous sound.

Q: Why will the speaker shut down automatically when it is working ?****

– A: When there is no bluetooth pairing for more than 10 minutes, the speaker will shut down automatically to reduce power consumption.

Q: Why can’t the speaker connect to a previously paired device?****

– A: First, remove the speaker’s pairing name from the device’s bluetooth list and then short press the power button twice quickly to restart pairing mode.

*This speaker supports mobile phones, tablets, PCs, etc.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

MADE IN CHINA

Documents / Resources

| PAXCESS TWINS Portable Bluetooth 2 In 1 Stereo Speaker [pdf] User Manual
TWINS22, 2AEX7-TWINS22, 2AEX7TWINS22, TWINS, Portable Bluetooth 2 In 1 Stereo Speaker, TWINS Portable Bluetooth 2 In 1 Stereo Speaker, Bluetooth 2 In 1 Stereo Speaker, 2 In 1 Stereo Speaker, Stereo Speaker, Speaker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>