MEE audio M7 Pro Hybrid Dual-Driver Musician’s In-Ear Monitors User Manual

QUICKSTART GUIDE
ON AND OFF THE STAGE
HYBRID DUAL-DRIVER MUSICIAN’S IN-EAR MONITORS
www.MEEaudio.com/M7PRO

Please read this quickstart guide in its entirety to ensure best fit and sound.
BEFORE FIRST USE, WATCH THE HOW TO WEAR FIT VIDEO at: goo.gl/e1rqdP

PRODUCT OVERVIEW

• *       * M7 PRO In-Ear Monitors

  • Stereo audio cable
  • Protective carrying case
  • Stereo headset cable
  • Shirt clip
  • Silicone eartips (5 pairs)
  • Comply™ memory foam eartips (2 pairs)
  • ¼” adapter
  • User manual

STEP 1 – ATTACHING THE EARPIECES

Select your desired cable and attach the earpieces as shown. Make sure to attach the cable connector marked “R” to the right earpiece and the connector marked “L” to the left earpiece.

Attach the cable by aligning the connectors with the earpieces and pushing them in until they “click”. Pull back slightly on each connector to make sure it is fitted securely.

To detach the cable, grasp the earpiece and cable connector firmly, and pull straight apart.

STEP 2 – SELECTING THE EARTIPS

Multiple sets of eartips are included to ensure you get the best fit with your headphones. The correct eartips for your ear will allow the earpieces to fit flush, reduce outside noise, and provide good bass response. Install eartips as shown. Make sure eartips are installed securely before use.

MEMORY FOAM EARTIPS

FOR REPLACEMENT TIPS, GO TO COMPLYFOAM.COM. THE COMPLY™ EARTIPS INCLUDED WITH THE M7 PRO ARE THE T-200 MEDIUM AND THE TW.

STEP 3: WEARING THE M7 PRO – STEREO AUDIO CABLE

Identify the right and left earpieces. Straighten the memory wire and put each earpiece in the corresponding ear. Adjust each earpiece until it fits flush in your ear and the eartip seals the ear canal.

Holding the earpiece in place, bend the memory wire around your ear to achieve a conforming fit. While pulling the cable gently with one hand, squeeze the memory wire behind your ear with the other hand until the fit is tight and secure.

STEP 3: WEARING THE M7 PRO [CONTINUED] – HEADSET CABLE

Identify the right and left earpieces. Place the earhooks over your ears and the earpieces in the corresponding ears. Adjust each earpiece until it fits flush in your ear and the eartip seals the ear canal.

STEP 3: WEARING THE M7 PRO [CONTINUED]

Tighten the sliding cable cinch for the most secure fit.
Use the shirt clip to control cable movement.

MICROPHONE & REMOTE USE

The headset cable included with the M7 PRO features an inline microphone and remote that can be used during phone calls and to control media playback.

*You may need to open the media player application for initial playback to start.
**Not all devices and applications support this functionality.

WARNING

WARNING
Using headphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at all times for your safety. Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds.
Keep the device and packaging out of reach of children.

ADDITIONAL INFORMATION

FOR ADDITIONAL SUPPORT

• View FAQs and troubleshooting guides at MEEaudio.com/Support
• Contact us at [email protected]

WARRANTY
The M7 PRO is covered by a 1-year manufacturer warranty. For more information, visit MEEaudio.com/Support

Have a question?
Email [email protected]

www.MEEaudio.com

MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved.
iPhone®, iPad®, iPod®, and Siri® are registered trademarks of Apple Inc. Android™ is a registered trademark of Google Inc.
© 2017 Hearing Components. Comply is a trademark of Hearing Components.

MEE audio M7 Pro Hybrid Dual-Driver Musician’s In-Ear Monitors User Manual – Download [optimized]
MEE audio M7 Pro Hybrid Dual-Driver Musician’s In-Ear Monitors User Manual – Download

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>