MEE audio lightSPKR Bluetooth Wireless Speaker with Camping Lantern User Guide
- June 1, 2024
- mee audio
Table of Contents
- MEE audio lightSPKR Bluetooth Wireless Speaker with Camping Lantern
- Specifications
- what’s in the box
- light Spkr Interface
- Charging
- Battery Level Indicator
- lantern operation
- Bluetooth pairing
- stereo mode
- MEE audio modes
- audio sources
- Power bank
- Frequently Asked Questions
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MEE audio lightSPKR Bluetooth Wireless Speaker with Camping Lantern
Specifications
- Product Name : Wireless Camping Speaker with Lantern
- Power Source : Rechargeable battery
- Audio Input : Bluetooth, AUX, USB
- Power Output: DC 5V, 1A
- Light Source : LED Lantern
- Charging Port: Type-C USB.
lightSPKR Setup Guide
Scan the QR code or visit:
MEEaudio.com/lightSPKRsupport
what’s in the box
light Spkr Interface
Bluetooth button
- Bluetooth pairing : long press
- Enable/disable stereo mode : double press Factory reset: press and hold 8s
Power button
Power on/off: long press
Change audio source : double press available only if multiple sources are
connected
Lantern control
Light on / off: turn knob
Next track button
Next track: single press
Previous track button
Previous track: single press
Audio control
- Volume up/down: turn knob
- Play/pause: single press
- Siri® / Google Assistant™: long press
- Answer/hang up phone call: single press
- Refuse incoming calls: long press
- Change MEE audio mode: double press
Charging
Step 1:
Plug charging cable into lightSPKR
Step 2:
Plug the charging cable into a powered USB port.
Battery Level Indicator
lantern operation
Step 1:
Power on the lightSPKR
Step 2:
Use the knob to turn on the lantern and adjust its color/brightness
Note: lightSPKR will automatically power off after 15 minutes of inactivity unless the lantern is on or audio is playing
Bluetooth pairing
Step 1 Power on:
Long press power button
Step 2 Bluetooth pairing:
Long press Bluetooth button blinking blue light = pairing mode
Step 3: Select MEE audio lightSPKR on the device
Note: To pair a different device, remove or disconnect the lightSPKR from the original device or the long-press Bluetooth button.
stereo mode
Stereo mode
Connect two lightSPKRs together in stereo for louder, more natural sound
Step 1:
Connect the first lightSPKR to your device. This will become your left speaker
Step 2:
Double-press the Bluetooth button on the left speaker
Step 3:
Double-press the Bluetooth button on the right speaker
Note: Double press the Bluetooth button on the left speaker again to exit stereo mode
MEE audio modes
Change audio modes
Double-press the audio control to cycle through different sound modes
Audio Modes
DYNAMIC:
Default audio mode with enhanced bass and treble response for engaging, yet
clear sound
BASS BOOST:
Enhances bass response and depth to create more impact and immersion
VOCAL BOOST:
Boosts speech and vocals for more clarity and intelligibility
audio sources
Switch audio inputs
Switch between Bluetooth, USB, and AUX input
Step 1:
Power on the lightSPKR
Step 2:
Plug a 3.5mm audio cable into the AUX input or a USB stick with music into the
USB port.
The audio source will automatically switch to the connected device.
Note: When 2 or more sources are connected, double-press the power button
to cycle available sources
Power bank
Step 1:
Power on the lightSPKR
Step 2:
Plug your device into the port labeled “USB” to charge
Note: The device will charge only while lightSPKR is powered on
questions?
we’re here to help!
Phone Support: 626-965-1008
Monday ~ Friday 9 am to 5 pm PST
Email Support: support@MEEaudio.com
All emails are responded to within 2 business days
WARRANTY
This product is covered by a 1-year manufacturer warranty. For more
information, visit MEEaudio.com/support.
MEE audio and its logo are registered trademarks of S2E, Inc. All rights
reserved.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by MEE audio is under license.
Other trademarks and trade names are those of their respective owners.
- Siri® is a registered trademark of Apple Inc.
- Google Assistant is a trademark of Google Inc.
Frequently Asked Questions
- Q: How do I reset the lightSPKR to factory settings?
- A: Press and hold the Bluetooth button for 8 seconds to perform a factory reset.
- Q: How do I know when the battery level is low?
- A: The Battery Level Indicator will show different levels of charge, and when it goes below 20%, it’s time to recharge.
- Q: Can I connect multiple devices simultaneously?
- A: The lightSPKR can only connect to one device at a time. To pair a different device, disconnect from the current one or long-press the Bluetooth button.