MEE audio massdrop 2-Pin Bluetooth Cable User Guide
- June 6, 2024
- mee audio
Table of Contents
MEE audio massdrop 2-Pin Bluetooth Cable
Charging
Pairing
Press and Hold for 5 Sec Pairing Mode
In Pairing Mode Red and Blue Flashing Lights
Select Massdrop x MEE BT Cable in your device’s Bluetooth menu
Controls
Factory Reset
To perform a factory reset first put the adapter in standby mode (powered on
but not connected). To do this, turn off Bluetooth or delete the Massdrop x
MEE BT Cable pairing from any previously-paired Bluetooth devices in range.
Once in standby mode, press and hold the multifunction and volume down buttons
simultaneously for 3 seconds until you hear “Memory Cleared”. All previously
paired devices will be cleared from memory and the adapter will automatically
enter pairing mode.
Read User Manual Online (PDF format)
Loading......