CRUX BTCR-35M Bluetooth Handsfree + 4 Channel Audio Streaming for Select Chrysler Instruction Manual
- June 4, 2024
- CRUX
Table of Contents
CRUX BTCR-35M Bluetooth Handsfree + 4 Channel Audio Streaming for Select
Chrysler Instruction
PRODUCT FEATURES
- Adds Bluetooth Handsfree Calling to the OEM radio.
- Adds 4-channel Bluetooth Music streaming.
- Automatically pauses BT Streaming when a call is received and resumes when the call is ended.
- Allows user to answer, end calls, track up and track down music using the steering wheel controls.
- DSP and Echo-Cancellation allow for clear conversations on both sides of the phone call.
- Allows any previously paired mobile phone to automatically re-connect to the Bluetooth interface.
- Hear Navigation App voice prompts from the factory speakers while in Bluetooth mode.
NOTES:
- Vehicle MUST have steering wheel controls.
- The vehicle MUST have a factory Aux Input.
PARTS INCLUDED
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTIONS
- Remove the radio to gain access to the connectors.
- Unplug the 22-pin factory connector from the radio.
- Plug the BTCR-35M T-harness between the radio and the factory connectors.
- Plug the 3.5mm auxiliary audio cable of the BTCR-35M to the factory AUX port.
- Plug the 3 pin microphone connector to the BTCR-35M t-harness.
- Run the microphone cable along the A-pillar and clip the microphone on the A-pillar trim.
DIP SWITCH SETTINGS:
- Set DIP #1 to ON and 2 to 6 OFF.
OPERATION
- Turn on the radio and go to the Bluetooth settings on the phone.
- Pair the phone to blue Logic.
- Change the source on the radio to AUX mode.
- Play music on your phone and audio will be heard on the car speakers.
- When there is an incoming call, go to AUX mode on the radio if you are in any other mode. Use the steering wheel control buttons to pick up and end the call. See steering wheel control button functions below.
CONTROL BUTTONS ON THE STEERING WHEEL
VEHICLE APPLICATIONS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>