KOHLER K-4991-ER Bardon High Efficiency Urinal Owner’s Manual
- July 6, 2024
- Kohler
Table of Contents
KOHLER K-4991-ER Bardon High-Efficiency Urinal
Specifications
- Product: BardonTM High-Efficiency Urinal K-4991-ER
- Spud Size: 3/4, Inlet, Rear
- Min. Water per Flush: 0.125 gpf (0.5 lpf)
- Max. Water per Flush: 1 gpf (3.8 lpf)
Product Information
Features
- High-efficiency urinal designed for water conservation
- Compatible with water-saving flushometer
- Meets ADA and CSA B651 compliance requirements
Material
The urinal is constructed with durable materials suitable for commercial installations.
Installation
- Install the urinal according to the provided installation guide.
- Ensure compliance with the manufacturer’s instructions and local plumbing codes.
- For ADA compliance, ensure the outlet spud height is 17 inches or less from the floor to the top of the lip.
- For CSA B651 compliance, ensure the outlet spud height is 16-7/8 inches or less from the floor to the top of the lip.
Recommended Products/Accessories
- K-23726 Drain treatment
- K-23725 Cast iron cleaner
- K-4929 Waterless Urinal Maintenance Balls
FAQ
- Q: How often should I use the drain treatment?
- A: The drain treatment can be used regularly to maintain optimal performance, typically every few weeks depending on usage.
- Q: Is the urinal suitable for residential use?
- A: The BardonTM High-Efficiency Urinal K-4991-ER is primarily designed for commercial use due to its high-efficiency features.
- Q: Can I use a different flushometer with this urinal?
- A: It is recommended to use a water-saving flushometer as specified for optimal water efficiency.
Features
- Washout urinal
- 3/4″ (19 mm) rear spud
- 0.125 – 1.0 gpf (0.47 – 3.8 lpf)
- Will replace K-4904-ER
Material
- Vitreous china
Installation
- 14″ (356 mm) extended rim
Recommended Products/Accessories
- K-23726 Drain treatment
- K-23725 Cast iron cleaner
- K-4929 Waterless Urinal Maintenance Balls
ADA/CSA B651
Codes/Standards
- ASME A112.19.2/CSA B45.1
- DOE – Energy Policy Act 1992
- EPA WaterSense®
- California Energy Commission (CEC)
- ADA
- ICC/ANSI A117.1
- CSA B651
- IAPMO Certification
KOHLER® One-Year Limited Warranty
See the website for detailed warranty information.
Available Colors/Finishes
Color tiles are intended for reference only.
Dimension
Technical Information
All product dimensions are nominal.
- Spud size: 3/4″, Inlet, Rear
- Min. Water per Flush:0.125 gpf (0.5 lpf)
- Max. Water per
- Flush: 1 gpf (3.8 lpf)
Designed for the above water use when installed with a water-saving flushometer.
Notes
Install this product according to the installation guide.
Refer to the manufacturer’s instructions and local codes for flushometer
requirements. Recommended ADA outlet spud height will account for normal
product variation. For ADA compliance, measurement must be 17″ (432 mm) or
less from the floor to the top of the lip. For CSA B651 compliance,
measurement must be 16-7/8″ (429 mm) or less from the floor to the top of the
lip. ADA, CSA B651 compliant when installed to the specific requirements of
these regulations.
Contact
1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada 6-13-2024 20:25 – US
References
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER