BRAYER BR1141 Coffee Maker Instruction Manual

BRAYER BR1141 Coffee Maker

DESCRIPTION

1. Body
2. Lid
3. Handle
4. Base
5. Power switch (0/I)

ATTENTION!
For additional protection it is reasonable to install a residual current device (RCD) with a nominal operating current not exceeding 30 mA, to install RCD, contact a specialist.

SAFETY MEASURES AND OPERATION RECOMMENDATIONS

Read the operation instructions carefully before using the coffee maker and keep it for future reference.

• Use the coffee maker for its intended purpose only, as specified in this manual.

• Mishandling the unit can lead to its breakage and cause harm to the user or damage to the user’s property, which is not covered by warranty.

• The coffee maker is intended for making coffee, heating and boiling drinking water, do not heat or boil any other liquids.

• Make sure that the operating voltage of the coffee maker indicated on the label corresponds to your home mains voltage.

• The power plug is equipped with a grounding contact, plug it into the socket with

• reliable grounding contact. In case of short circuit the grounding reduces the risk of electric shock.

• Contact an electrical technician, if you are not sure that your sockets are installed properly and grounded.

• To prevent fire do not use adapters designed for connecting the plug to the mains socket without grounding contact.

• In case of sparking in the mains socket and occurrence of smell of burning, unplug the unit and apply to the organization maintaining your home mains.

• If smoke appears from the unit body, unplug the unit and take measures to prevent fire spreading.

• Do not use the coffee maker outdoors.

• It is not recommended to use the unit during lightning storms.

• Protect the unit from impacts, falling, vibrations and other mechanical stress.

• Never leave the plugged-in coffee maker unattended.

• Do not use the coffee maker in proximity to the kitchen sink, in bathrooms, near swimming pools or other containers filled with water.

• If the unit is dropped into water, unplug it immediately, and only then you can take the unit out of water.

• Do not use the coffee maker near heating appliances, heat sources or open flame.

• Do not use the unit in places where aerosols are used or sprayed, and in proximity to inflammable liquids.

• Place the coffee maker on a flat stable surface; do not place it on the edge of a table. Do not let the power cord hang from the edge of the table and make sure it does not touch hot surfaces or sharp edges of furniture.

• Do not direct the coffee maker spout at wooden furniture, books and objects which can be damaged by moisture or hot steam.

• Do not touch the power cord and the power plug with wet hands.

• Do not switch the coffee maker on if the water tank is empty.

• Ensure that the water level in the coffee maker is not above the maximal mark. If the water level exceeds the maximal mark, boiling water can splash out during boiling.

• To avoid burns by hot steam, do not bend over the coffee maker.

• The coffee maker body surface and the heating element may have rather high temperature. Be cautious and careful when in contact with heated surfaces of the coffee maker.

• Be careful when carrying the coffee maker with ready coffee. Pour the ready coffee carefully, do not tilt the coffee maker sharply. In case of careless use you may have burns by hot water or coffee.

• Unplug the coffee maker before cleaning or when you are not using it. When unplugging the coffee maker hold only the power cord plug and carefully remove it from the mains socket, do not pull the power cord — this can lead to damage of the power cord or the socket or cause short circuit.

• To avoid electric shock do not immerse the coffee maker into water or any other liquids.

• Do not wash the coffee maker in a dishwashing machine.

• For children safety reasons do not leave polyethylene bags, used as a packaging, unattended.

• ATTENTION!
  Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!

• The coffee maker is not intended for usage by children.

• Do not leave children unattended to prevent using the unit as a toy.

• Do not allow children to touch the unit and the power cord during the coffee maker operation.

• Place the unit out of reach of children during the operation and cooling down.

• This unit is not intended for usage by physically or mentally disabled persons (including children) or by persons lacking experience or knowledge if they are not under supervision of a person who
  is responsible for their safety or if they are not instructed by this person on the usage of the unit.

• Check the integrity of the power cord, the power plug and the coffee maker body periodically.

• If the power cord is damaged, it should be replaced by the manufacturer, a maintenance service or similar qualified personnel to avoid danger.

• Do not repair the unit by yourself. Do not disassemble the unit by yourself, if any malfunction is detected, and after it was dropped, unplug the unit and apply to the service center.

• Transport the coffee maker in the original package.

• Keep the unit out of reach of children and disabled persons.

COFFEE MAKER IS INTENDED FOR HOUSEHOLD USE ONLY, DO NOT USE THE KETTLE FOR INDUSTRIAL OR LABORATORY PURPOSES.

BEFORE USING THE COFFEE MAKER

After unit transportation or storage at low temperature, it is necessary to keep it for at least three hours at room temperature.

• Unpack the coffee maker and remove all the packaging materials.

• Keep the original package.

• Check the delivery set.

• Read the safety measures and operating recommendations.

• Examine the coffee maker for damages, in case of damage do not plug it into the mains.

• Make sure that the specifications of power supply voltage specified on the lower panel of the unit or the base (4) correspond to the specifications of your mains.

• Wipe the outer surface of the unit body (1) with a clean, slightly damp cloth to remove dust.

• Place the base (4) on a solid steady flat and non-slip non-metal surface away from heat sources as far as possible from the edge of the surface.

• Do not place and do not use the coffee maker in closed space, for example, in the cupboard or in closed structures — this can lead to its breakage, cause harm to the user or damage to his/her property.

• Remove the lid (2), wash the lid (2) with neutral detergent, rinse and dry. Wipe the outer surface of the unit body (1) with a slightly damp cloth and then wipe it dry. Do not use abrasives or coarse scourers for this.

• Before connecting the coffee maker, make sure that there are no moisture drops on the unit body (1), the power cord and the power plug.

• Make sure that the coffee maker is switched off and the power switch (5) is set to the position «0».

• To fill the coffee maker with water, take it off the base (4) and remove the lid (2).

• Fill the coffee maker with water up to the maximal level mark.

• Set the coffee maker filled with water on the base (4).

• Insert the power plug into the mains socket.

• Set the power switch (5) to the “I” position to switch the coffee maker on; the light indicator in the power switch will light up.

• ATTENTION!
  To avoid burns by hot steam, do not bend over the coffee maker.

• When water starts boiling, switch the coffee maker off by setting the power switch (5) to the position «0», the light indicator will go out. Pour out water and repeat the water boiling procedure several times.

• Hot water resulting from the first boilings is not recommended to consume, you may use it for domestic needs.

• The coffee maker is ready for usage.

USING THE COFFEE MAKER

• ATTENTION!

  • To avoid damage of the coffee maker do not switch it in without water. If you accidentally switched the coffee maker on without water, unplug the coffee maker and let it cool down. Do not try to cool the unit down by filling it with water. When the coffee maker cools down, fill it with water and it will be ready to use.
  • To avoid scaling use filtered water.
  • Depending on your taste you can add the necessary amount of ground coffee, sugar and spices to the coffee maker.

• • Place the base (4) on a solid and steady flat surface away from heat sources as far as possible from the edge of the surface.
  • Make sure that the power switch (5) is always easily accessible and it is not blocked by foreign objects.
  • Make sure that the coffee maker is switched off and the power switch (5) is set to the position «0».
  • To fill the coffee maker with water, take it off the base
  (4) and remove the lid (2).
  • Fill the coffee maker with water up to the maximal level mark, add the required amount of ground coffee, sugar and spices.
  • Notes: — use ground coffee intended for brewing in the coffee maker.
  • Set the coffee maker on the base (4).

• Insert the power plug into the mains socket.

• Set the power switch (5) to the “I” position to switch the coffee maker on; the light indicator in the power switch will light up.

• During coffee making it is recommended to stir the coffee once or twice.

• ATTENTION!

  • Do not stir the coffee in the coffee maker with a metal spoon or other metal objects, if the coffee maker is connected to the mains socket without grounding contact.
  • Coffee is a drink prone to quick boiling. Do not leave the coffee maker unattended during making coffee, especially when the coffee starts boiling.
  • If the ready drink is splashing out, immediately unplug the coffee maker to avoid getting burns.
  • If you don’t use the coffee maker, unplug it.

• When the coffee starts rising and boiling, switch the coffee maker off by setting the power switch (5) to the position «0», the light indicator will go out.

• Remove the power plug from the mains socket.

CLEANING AND MAINTENANCE

• Before cleaning unplug the coffee maker, pour out water and let the coffee maker cool down.
• Remove the lid (2), wash the lid and the coffee maker, dry the lid (2) and the coffee maker.
• Wipe the outer surface of the unit body (1) with a slightly damp cloth and then wipe the unit body (1) dry. Use soft detergents to remove dirt; do not use metal sponges, abrasive detergents and solvents.
• Do not immerse the coffee maker, the base (4) and the power cord into water or any other liquids, do not wash the unit in the dishwasher.
• Do not allow water to get on the contact block of the base (4).

DESCALING

• During the use of the unit some stains, scale etc. can appear on the heating element,
• it is not a problem, but a result of water quality.
• Scale, appearing inside the unit body (1), influences the water taste and disturbs the heat exchange between water and the heating element. It also risks damaging the heating element. Burning of the heating element caused by the large amount of scale in the coffee maker is not covered by warranty.
• To remove scale, you can use special scale-removing agents, as well as household ones, for example, vinegar or citric acid.
• To remove scale, fill the coffee maker with water one-third full and boil it. Add vinegar (6-9%) up to the maximal mark and leave the liquid in the coffee maker for several hours. After the scale dissolves, pour out the liquid and rinse the coffee maker several times. To oust the smell of vinegar, boil water several times.
• Dissolve 25 g of citric acid in 500 ml of hot water.
• Fill the coffee maker with the prepared solution and leave for 15-20 minutes.
• After the scale has dissolved, pour out the liquid and rinse the coffee maker several times, after that boil water several times.
• You can use special detergents for electric kettles or coffee machines to remove scale, strictly following the instructions on their usage.
• Clean the coffee maker from scale regularly.

STORAGE

• Before taking the coffee maker away for long storage, unplug it, pour out water and let the unit cool down.
• Clean the coffee maker body (1), wash the coffee maker and the lid (2) and dry them.
• Cover the coffee maker with the lid (2).
• Pack the coffee maker in the original package.
• Keep the coffee maker in a dry cool place out of reach of children and disabled persons.

DELIVERY SET

1. Coffee maker — 1 pc.
2. Base — 1 pc.
3. Manual — 1 pc.

TECHNICAL SPECIFICATIONS

• Supply voltage: 220-240 V, ~ 50-60 Hz
• Rated input power: 750-850 W
• Maximum water capacity: 0.5 l

RECYCLING

For environment protection apply to the specialized centers for further recycling after the service life expiration of the unit. The waste generated during the disposal of the unit is subject to mandatory collection and consequent recycling in the prescribed manner. For further information about recycling of this product apply to a local municipal administration, a disposal service or to the shop where you purchased this product. The manufacturer reserves the right to change the appearance, design and specifications not affecting general operation principles of the unit, without prior notice. The unit operating life is 3 years The manufacturing date is specified in the serial number. In case of any malfunctions promptly apply to the authorized service center.

т.: +7 (495) 297-50-20,
e-mail: info@brayer.su

References

• BRAYER - официальный сайт австрийского бренда бытовой техники

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>