MEE audio Matrix Cinema Bluetooth Wireless Media Headphones for TV User Manual
- June 8, 2024
- mee audio
Table of Contents
QUICKSTART GUIDE
ENGINEERED FOR RICH AND CLEAR SOUND
MATRIX CINEMA
Bluetooth® Wireless Media Headphones for tv
with Cinema EAR Audio Enhancement
www.MEEaudio.com/MatrixCinema
BLUETOOTH SUPPORT PAGE
View easy-to-follow video setup guides and the latest troubleshooting
information by visiting MEEaudio.com/Bluetooth or scanning the QR code.
MUSIC ENJOYMENT FOR EVERYONE
PACKAGE CONTENTS
PRODUCT OVERVIEW
CHARGING
Connect micro-USB cable to the charging port of the Matrix Cinema and a
powered-on computer or USB charger.
Charge time is ~2 hours. The red charging indicator light will turn off once
fully charged.
Low battery is indicated by a flashing red status indicator light and “battery
low” voice notification every five minutes.
PAIRING
Power on the headphones.
Press and hold the Multifunction button for about 5 seconds until you hear the
headset say “Ready to Pair” and the light flashes red and blue.
Note: the headphones will enter pairing mode automatically on first use or
after a reset.
Open the Bluetooth menu on the device you wish to pair (usually located in
Settings->Bluetooth).
If needed, select “search for devices”, “add new device”, or “refresh.”
Select “MEE audio Matrix Cinema” and allow pairing to complete. Use “0000” if
a pin is required.
Visit the Bluetooth Support Page at
MEEaudio.com/Bluetooth
for additional Bluetooth pairing and setup information.
BASIC FUNCTIONALITY & CONTROLS
*To start playing music, open a music app on your device and start playback.
**Not all devices support this functionality. For more information, refer to
the user manual for your device.
Cinema EAR AUDIO ENHANCEMENT
CinemaEAR is an advanced audio enhancement feature that allows for on-the-fly audio adjustment with four different hearing and sound enhancement modes:
CinemaEAR is disabled by default.
ADVANCED FUNCTIONALITY
MULTIPOINT
Multipoint is an optional feature which allows two Bluetooth devices to be
connected to the Matrix Cinema simultaneously. It is enabled by default.
*Standby mode: headphones are powered on but not connected to any Bluetooth device(s).
While in standby mode, the blue status indicator light blinks every second
DISABLING AUDIO PROMPTS
The Matrix Cinema’s voice prompts can be disabled for uninterrupted listening.
This will turn off all voice prompts and some basic audio notifications.
*Standby mode: headphones are powered on but not connected to any Bluetooth device(s).
While in standby mode, the blue status indicator light blinks every second
DISABLING STATUS INDICATOR LIGHT
The status indicator light on the right earcup of the Matrix Cinema can be
disabled for uninterrupted use in low-light environments.
USE AS WIRED HEADPHONE
The Matrix Cinema can be used as a wired headphone with the included 3.5mm
stereo audio cable. This allows use when the battery is depleted and with
devices that do not have
Bluetooth (such as in-flight entertainment systems) or aren’t paired.
Note: the microphone, remote controls, and CinemaEAR audio enhancement
functionality of the Matrix Cinema will not work when the headphones are used
in wired mode.
TROUBLESHOOTING
CLEAR MEMORY (DELETE PAIRED DEVICES):
This can be used to delete all previous Bluetooth pairings from memory. Before
the Matrix Cinema can be used again, a new pairing will need to be created.
FACTORY RESET
This can be used to restore all of the features of the Matrix Cinema to their
factory settings.
HARD REBOOT
A hard reboot can be used on a headphone that has become unresponsive. This
does not delete any pairings or reset any settings.
SAFETY AND CARE
Clean with a soft cloth, damp with diluted soap water solution if necessary.
Do not use chemical cleaners.
When not in use, power the headphones off and store in the included protective
carrying case.
Battery performance will be severely decreased when stored in extreme
temperatures: below -10°C/14°F or above 45°C/113°F including direct sunlight.
The lifetime of the battery will be significantly reduced if your headset is
not charged for a long time. It is recommended to charge your headset at least
once a month.
There are no user-replaceable/reparable parts in the headset. Disassembling it
will void your warranty.
If the device comes in contact with liquids, quickly wipe away. If submerged
in water, do not turn the device on until completely dried. Note: liquid
submersion voids the warranty.
Do not use around flammable gasses as fire or explosion may occur.
WARNING
Using headphones at high volumes for extended periods of time will result in
permanent hearing damage. It is advised you keep volume levels moderate to low
at all times for your safety. Turn the volume all the way down after
connecting your headphones, then gradually increase the volume until you reach
a comfortable listening level. Do not use while driving a car, cycling,
operating machinery, or performing other activities that require hearing
surrounding sounds.
Keep the device and packaging out of reach of children.
FOR ADDITIONAL SUPPORT
- Download the full user manual at MEEaudio.com/MatrixCinema or by scanning the QR code
- Visit our Bluetooth Support Page at MEEaudio.com/Bluetooth for easy-to-follow video setup guides and the latest troubleshooting information
- Contact us at support@MEEaudio.com
WARRANTY
MEE audio products purchased from authorized resellers are covered by a 1-year manufacturer warranty. For more information, contact your local MEE audio dealer or visit MEEaudio.com/Support
QUESTIONS?
WE’RE HERE TO HELP!
Phone Support: 626-965-1008 x31
Monday ~ Friday 9am to 5:30pm PST
Email Support: support@MEEaudio.com
All emails are responded to within 2 business days
Have a question?
Email support@MEEaudio.com
MEE audio and its logo are registered trademarks of S2E, Inc. All rights
reserved.
iPhone®, iPad®, iPod®, and Siri® are registered trademarks of Apple Inc.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by MEE audio is under license.
Other trademarks and trade names are those of their respective owners.
Qualcomm® aptX™ is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission.
MEE audio Matrix Cinema Bluetooth Wireless Media Headphones for TV User Manual
– Download [optimized]
MEE audio Matrix Cinema Bluetooth Wireless Media Headphones for TV User Manual
– Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>