Pinnacle P1 High Fidelity Audiophile In-Ear Headphones User Manual
- June 8, 2024
- mee audio
Table of Contents
Thank you for choosing the MEE audio Pinnacle P1 High Fidelity In-Ear
Headphones.
The Pinnacle P1 is a high-impedance in-ear headphone designed for audiophiles
and music professionals and tuned to deliver the highest levels of resolution
and refinement.
While a headphone amplifier is not required to enjoy the Pinnacle P1, the
audio hardware in some phones, tablets, and computers is not designed with
high- impedance headphones in mind and using a dedicated audio source or
amplifier instead can make the difference between a great listening experience
and an outstanding one.
The superb sound quality and resolution of high-end headphones such as the
Pinnacle P1 are also more pronounced when listening to recordings in CD (or
better) quality. To experience the full potential of the P1, we recommend
avoiding music that has undergone excessive dynamic range compression or been
digitally compressed into low-bitrate formats. We hope you enjoy the Pinnacle
P1 and wish you happy listening!
Package Contents
Pinnacle P1 audiophile in-ear headphones High-fidelity silver-plated stereo audio cable Headset cable with microphone and remote Comply T-200 memory foam eartips (3 pairs) Silicone eartips (6 pairs) ¼” (6.3mm) stereo adapter Premium carrying case Shirt clip User manual
Configuring for Your Ears
An airtight seal between the earpieces and your ear canals is required for
your Pinnacle P1 earphones to deliver the level of sound quality they are
engineered for. Multiple sets of eartips are included to ensure you get the
best fit. We recommend trying each of the included eartips to find the size
that provides the best comfort and sound for your ears. Because ear canals are
not always symmetrical, you may need to use different-size ear tips in each
ear.The correct eartip for your ear will:
• Fit inside your ear canal without discomfort
• Seal with your ear canal and reduce outside noise when inserted
• Provide the best bass response and overall sound quality
Install eartips as shown. Make sure eartips are mounted securely
before use.
COMPLY Memory Foam Eartips
The Pinnacle P1 comes with Comply™ Memory Foam eartips in three sizes. Memory
foam eartips are designed to provide a more comfortable fit by using body heat
to conform to the shape of the ear canal. Install Comply™ eartips as shown on
previous page.
Inserting the comply tm Premium memory Foam Eartip
changing the comply tm Premium memory Foam Eartips
Remove old Comply™ foam tip by grasping the entire tip, including the plastic
inner core, at the back of the tip (close to the earpiece). Firmly pull the
tip off the earphone nozzle, rotating slightly or pulling at an angle if
necessary to overcome friction.
Clean earphone nozzle of any debris. Securely install the new Comply™ Premium
Earphone Tip onto clean, dry nozzle. Recommended replacement is after 3 months
of regular use. For replacement tips, visit complyfoam.com. The Comply™ eartip
size included with the Pinnacle P1 is the T-200.
Attaching the Earpieces
The Pinnacle P1 includes two detachable, interchangeable cables:
1. STEREO AUDIO CABLE
Silver-plated 99.99% pure copper stereo audio cable ensures the richest detail
retrieval and maximum performance with high-end
audio systems.
2. HEADSET CABLE
The headset cable incorporates a microphone and remote button for phone calls
and media control with compatible phones and tablets (see MICROPHONE & REMOTE
USE section on p. 8 for more info).
Before using the earphones, select your desired cable and attach the
earpieces. Make sure to attach the cable connector marked “R” to the earpiece
you will use in your right ear and the connector marked “L” to the earpiece
you will use in your left ear – see SELECTING A WEAR STYLE on the next page
for more info.
Selecting a Wear Style
The unique ergonomics and detachable cables of the Pinnacle P1 are designed so
that the earphones can be worn either in the conventional “cable down” style
or using a “cable up” musician fit, which can be more secure and reduces cable
noise (microphonics)
Selecting a Wear Style
(CONTINUED)
Adjust earpiece until it fits flush in the ear and the eartip seals in the ear
canal. Repeat for other side.
EARPIECE B WORN IN RIGHT EAR
Cable Management
Microphone & Remote Use
The headset cable included with the Pinnacle P1 features an inline microphone
and remote that can be used during phone calls and to control media
playback.
*You may need to open the media player application for initial playback to start.
**Not all media players support this functionality.
Care and Storage
Do not remove from ears or headphone jack by pulling on the cable.
Always store in the included protective carrying case when not in use. Do not
store in direct sunlight, near heating devices, or in humid places.
Do not expose to liquids. If the earphones come in contact with liquids,
quickly wipe away. If submersed in water, do not use until completely dried.
Note: liquid submersion voids the warranty.
If necessary, clean the earphones with a small amount of hydrogen peroxide on
a cotton swab. Swab only the outside of the earphone. Eartips can be removed
and rinsed under running water or in hydrogen peroxide. Allow earphones and
eartips to dry completely before resuming use.
Replacement parts and accessories are available online at
www.MEEaudio.com
Warning
Using headphones at high to moderate volumes for extended periods of time will
result in permanent hearing damage. Do not use while driving a car, cycling,
operating machinery, or performing other activities that require hearing
surrounding sounds.
It is advised to turn the volume on your device all the way down before
connecting your headphones, then gradually increase the volume until you reach
a comfortable listening level.
Support
Contact support@MEEaudio.com or visit www.MEEaudio.com for troubleshooting information and solutions to common issues.
warranty
MEE earphones purchased from authorized retailers are covered by a 2-year manufacturer warranty. Visit www.MEEaudio.com for warranty information.
Specifications
See the Pinnacle P1 product page at www.MEEaudio.com for product
specifications
MEE audio and its logo are registered trademarks of S2E, Inc. All rights
reserved.
iPhone®, iPad®, iPod® are a registered trademark of Apple Inc.
Android™ is a registered trademark of Google Inc.
© 2014 Hearing Components. Comply is a trademark of Hearing Components.
www.MEEaudio.com
support@MEEaudio.com
Pinnacle P1 High Fidelity Audiophile In-Ear Headphones User Manual – Download
[optimized]
Pinnacle P1 High Fidelity Audiophile In-Ear Headphones User Manual –
Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>