MEE audio M9B Stereo Wireless Sports Earphones User Manual
- June 8, 2024
- mee audio
Table of Contents
USER MANUAL
M9B
Stereo Wireless
Sports Earphones
Please read this manual in its entirety to ensure best fit and sound.
PACKAGE CONTENTS
M9B
Stereo Wireless Earphones
PRODUCT OVERVIEW
CHARGING
Connect the charging cable to any powered USB port and to the charging port
located on the headset’s remote control.
The status indicator light will stay red while charging and turn blue when
fully charged.
When the battery is low, the headset will say “battery low” and a red light on
the remote will flash twice every two seconds.
Apple® devices such as the iPhone®, iPad®, and iPod touch® will also display
an on-screen headset battery indicator when the M9B is connected.
Note : the lifetime of the battery will be significantly reduced if your headset is not charged for a long period of time. It is recommended to charge your headset at least once a month.
WEARING THE EARPHONES
Wearing the M9B correctly will ensure the most comfortable and secure fit
STEP 1:
Select and install the correct eartips.
The M9B is an in-ear headphone and relies on a tight seal between eartip and
ear canal to deliver great sound and bass.
Four sizes of ear tips are included to help you achieve the best fit.
We recommend trying all of them and selecting the ones with the best sound and
comfort for your ears.
STEP 2:
Put the earphones in your ears. Adjust the earpieces for an airtight seal.
When worn correctly, the earphones will reduce outside noise and deliver good
bass impact. If you do not get much bass or hear tinny sound with excessive
treble presence, re-adjust the fit of the earphones in your ears and/or try a
different size of eartips.
STEP 3 (Optional):
Adjust the cable cinch to reduce cable slack for a more secure and comfortable
fit.
BLUETOOTH PAIRING
Your headset must be paired to a Bluetooth device before it can be used. It is only necessary to pair your headset once with each device.
-
Make sure the M9B is turned off and within 3 feet (1 meter) of the device you wish to pair. Press and hold the Multifunction button for about 4 seconds until the headset says “Pairing”. The status indicator light will flash red and blue in an alternating pattern while the M9B is in pairing mode.
Note: The M9B will remain in pairing mode for 5 minutes or until paired. -
Open the Bluetooth menu on the device you wish to pair.
iPhone, iPad, and iPod touch
A) On your device, open the Settings menu
B) Select Bluetooth. If Bluetooth is not on, turn it on.
The iPhone/iPad/iPod® will automatically search for new devices
Android™ Phones and Tablets
A) On your device, open the Settings menu
B) Select Bluetooth (on older Android devices Bluetooth is found in the Wireless & Networks menu). If Bluetooth is not on, turn it on. Select “Search for Devices” or “Refresh” if your phone or tablet does not automatically search for new devices.
Windows® Phone 8 devices
A) On your device, open the Settings menu
B) Select Bluetooth. If Bluetooth is not on, turn it on.
Windows Phone 8 will automatically search for new devices Computers, Laptops, and Other Devices
Visit www.MEEaudio.com/Bluetooth for pairing and setup information. -
Wait until you see “M9B” on the screen of your device.
Select “M9B” on your device and follow any further prompts to pair. Use “0000” if a pin is required. Once connected, the headset will say “Connected” and the blue indicator light will flash three times every 9 seconds. -
If pairing fails after several tries, please refer to your device’s user manual for additional information. Visit www.MEEaudio.com/Bluetooth for instructional pairing videos and troubleshooting information.
CONNECTING TO PAIRED DEVICES
When turned on, the M9B will automatically connect with the last paired and/or connected Bluetooth device that is powered on and within range. If the headset does not connect automatically, open the Bluetooth menu on your device and select “M9B” from the list of paired devices.
MULTIPOINT
Multipoint allows two Bluetooth devices to be connected to the M9B
simultaneously. Both devices will need to be paired before multipoint can be
used by following the pairing procedure described in the Bluetooth Pairing
section for each device.
To use two Bluetooth devices with the M9B, turn the unit on and wait until it
connects to the last paired device. Then, select “M9B” from the Bluetooth menu
of the second device you wish to connect. The headset cannot be connected with
more than two devices.
To switch between the two devices, pause audio playback on the active device
and start audio playback on the other connected device. It takes several
seconds for the audio to switch.
Incoming calls will always take precedence over media. When a call comes in,
the M9B will automatically activate the device with the incoming call. Some
devices, such as computers and standalone audio transmitters, do not allow
audio switching except when a phone call occurs.
If you no longer wish to connect to multiple devices, disable Bluetooth on the
device you do not want connected to the M9B or remove the “M9B” pairing from
the Bluetooth menu of that device.
FUNCTIONALITY & CONTROLS
- You may need to bring your media player up on the screen for initial playback to start
** Not all devices/applications support this functionality.
FACTORY RESET
A factory reset will clear all paired devices from memory. To perform a factory reset, put the headset in pairing mode as described in the Bluetooth Pairing section, then press and hold the Volume up and Volume down buttons at the same time for 2 seconds. The headset will produce three tones and the blue indicator light will flash twice to indicate the memory has been cleared. The headset will need to be paired with a Bluetooth device before use.
SAFETY AND CARE
- To clean, remove the eartips and rinse them under running water. Clean the earphones using a cotton swab damp with a small amount of rubbing alcohol. Allow the earphones and eartips to dry completely before resuming use.
- Use only the supplied Micro-USB charging cable or a compatible replacement from a reputable manufacturer.
- Battery performance will be severely decreased when stored in extreme temperatures: below -10°C/14°F or above 50°C/122°F, including direct sunlight.
- If the device comes in contact with liquids, quickly wipe away. If submerged in water, do not turn the device on until completely dried. Note: liquid submersion voids the warranty.
- Do not use around flammable gasses as fire may occur.
- Keep the device and packaging out of reach of children.
WARNING
Using headphones at high volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at all times for your safety. Turn the volume all the way down after connecting your earphones, then gradually increase the volume until you reach a comfortable listening level. Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds.
TROUBLESHOOTING
Visit www.MEEaudio.com/Bluetooth for troubleshooting procedures.
SPECIFICATIONS
Visit www.MEEaudio.com/M9B for product specifications.
WARRANTY
The M9B is covered by a 1-year manufacturer warranty.
For more information, visit
www.MEEaudio.com/Support.
Have a question?
Email support@MEEaudio.com
MEE audio and its logo are registered trademarks of S2E, Inc. All rights
reserved.
iPhone®, iPad®, iPod®, iPod touch®, and Siri® are registered trademarks of
Apple Inc.
Android™ is a registered trademark of Google Inc.
Windows® Phone is a registered trademark of Microsoft Corporation in the
United States and other countries.
www.MEEaudio.com
support@MEEaudio.com
MEE audio M9B Stereo Wireless Sports Earphones User Manual – Download
[optimized]
MEE audio M9B Stereo Wireless Sports Earphones User Manual –
Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>