SoundPEATS TrueFree True Wireless Bluetooth Earbuds User Manual

June 8, 2024
SoundPEATS

TrueFree:90 x 84 mm

MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited
Room 1308-1309, Building B, Huihai Square, Chuangye Road,
Longhua District, Shenzhen, China. 518109
support@soundpeatsaudio.com
www.soundpeatsaudio.com

rohs logo

FCC ID:2AFTUYL001
Made in China
211-181022

TrueFree

soundpeats diagram engineering drawing

USER MANUAL

Contents
English ————————————————————————————— 1 – 7

Package Content
package diagram

Product Diagram
product diagram

Specifications

Bluetooth Pro”le|

Bluetooth 5.0, AVRCP, HFP, HSP, A2DP

---|---
Bluetooth Chipset| Realtek 8763BFR
Maximum Working Range| 33 feet / 10m (no obstacle)
Play Time|

3-4 hours (varies by volume and audio “le)

Charging Time| 1.5 hour
Charging Case Recharge Earbuds| 4-5 times (both earbuds)
Earbud Capacity| 43mah
Charging Case Capacity| 380mAh
Earbud Dimension (L W H)|

0.960.860.64 inches / 2421.916 mm

Earbud Weight| 0.16oz / 4.7g

Wearing

  1. Identify the leP and right
  2. Insert the earbuds into your ears and adjust to “nd best angle with microphone
  3. Make sure the eartips seal the ear canals.

Get Started
Mono Mode

  1. The earbud enters pairing mode directly with a voice prompt “power on” after
    being taken out from the charging case. White indicator flashes quickly for around
    10s, then red and white indicators flash alternately with a voice prompt “pairing”.
    “SOUNDPEATS TrueFree L” or “SOUNDPEATS TrueFree R” would show up on the
    Bluetooth list, hit it to connect.

  2. If you want to connect two earbuds separately with 2 devices nearby, please
    connect the left one to one device at rst. In case it will connect to the right earbud
    automatically after being taken out from the charging case.
    Stereo Mode
    Take out both earbuds from the charging case. The two earbuds will flash in white
    at rst. Then the left indicator goes out, and right indicator flashes in red and white.
    Activate the Bluetooth in your device and hit “SOUNDPEATS TrueFree R” on the
    Bluetooth list.

Factory Reset
(Try the following steps if you fail building connection between two earbuds, or
between earbuds and device)

  1. Clear the pairing record between the earbuds and all of your devices.
  2. Hold and press the MFB of both earbuds for 10 seconds when in charging
    status, the LED indicator will flash red for 3 times if resetting successfully

Charge
1. Please charge the earbuds at least once every 3
months when not in use for a long time.
2. To ensure charging safety, please do not use any
USB charging adapter with current over 5V 1A.
Please do not use quick charger to charge the
earbuds and charging case
charge earbuds engineering drawing
Note:
1. If you don’t know which device the earbud has already connected, please turn
it o, then press and hold the button for 5 seconds until red and white indicator
flashes alternately to have the earbud enter pairing mode again.
2. If pairing device is switched o or Bluetooth disconnected, the earbuds will stay in
pairing mode for 5 minutes and then power o automatically.
3. The earbuds can remember previously paired devices. They would automatically
connect to the last device they have paired before after being taken out from
the case.

Power On|

Take out the earbuds from charging case
Press and hold the MFB for 1s until white LED flashes

---|---
Power Off|

Place back the earbuds into charging case
Press and hold the MFB for 3s until red indicator long flashes once. In Stereo Mode, turn off either earbud will switch off both units

Play / Pause| Press the MFB once
Play Next / Previous|

Double tap leP MFB for previous track Double tap right MFB for next track

Answer Phone Call| Press the MFB once
Hang Up| Press the MFB once
Reject Phone Call| Press the MFB for 1.5s
Mute / Resume A Call| Double tap the MFB during a call
Activate Voice Assistant| Press the MFB for 1s in play / standby mode
Transfer Voice Between
Earphones and Phone| Press the MFB for 1s during a call
Call Switching|

During a call, if there is another incoming call at the same time Press the MFB to answer the second call and put the “rst on hold.
Long press 1s to reject the new incoming call.
Double tap the MFB to switch between two phone calls. Press once to hang up the current call.

LED Indicator

Status Earbuds LED Indicator
Charging Red indicator stays on
Fully charged

White indicator turns on and goes off aPer 1 minute

Pairing mode| Red and white indicators flash alternately
Earbuds connect to each other| White LED indicator flashes quickly
Status| Earbuds LED Indicator
---|---
Charging| Green indicators stay on
Fully charged| Green indicators go off

Warranty
We warrant this device 12 MONTHS from date of the original purchase for manufacturer
defects.
support@soundpeatsaudio.com
www.soundpeatsaudio.com
Please scan the QR code or search the link below for detailed PDF manual :

https://soundpeatsaudio.com/downloads/

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
English digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

SoundPEATS TrueFree True Wireless Bluetooth Earbuds User Manual – Download [optimized]
SoundPEATS TrueFree True Wireless Bluetooth Earbuds User Manual – Download

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals